742909
74
Verklein
Vergroot
Pagina terug
1/177
Pagina verder
User Guide
126
responsive to other RSTP bridge's link status. The port does not need to wait for the topology to become
stable. Edge port and P2P port are introduced to the protocol for faster transition. The explanation of an
Edge port and a P2P port is shown below:
Edge Port
The edge port is a configurable designation port that is directly connected to a segment where a loop
cannot be created. Usually it would be a port connected directly to a single workstation. Ports that are
designated as edge ports transition to a forwarding state immediately without going through the listening
and learning states. An edge port loses its status if it receives a BPDU packet, immediately becoming a
normal spanning tree port.
P2P Port
A P2P port is also capable of rapid transition. P2P ports may be used to connect to other bridges. Under
RSTP/MSTP, all ports operating in full-duplex mode are considered to be P2P ports, unless manually
overridden through configuration. The three protocols are mutually compatible and no conflicts or network
collapses will be caused in spanning tree application.
MSTP Overview
MSTP divides a network into several MST regions. The CST is generated between these MST regions,
and multiple spanning trees can be generated in each MST region. Each spanning tree is called an
instance. As well as STP, MSTP uses BPDUs to generate spanning tree. The only difference is that the
BPDU for MSTP carries the MSTP configuration information on the switches. MSTP allows formation of
MST regions that can run multiple MST instances (MSTI). Multiple regions and other STP bridges are
interconnected using one single common spanning tree (CST). Unlike some proprietary per-VLAN
spanning tree implementations, MSTP includes all of its spanning tree information in a single BPDU
format. Not only does this reduce the number of BPDUs required on a LAN to communicate spanning tree
information for each VLAN, but it also ensures backward compatibility with RSTP. MSTP does this by
encoding additional region information after the standard RSTP BPDU as well as a number of MSTI
messages (from 0 to 64 instances, although in practice many bridges support fewer). Each of these MSTI
configuration messages conveys the spanning tree information for each instance. Each instance can be
assigned a number of configured VLANs and frames (packets) assigned to these VLANs operate in this
spanning tree instance whenever they are inside the MST region. In order to avoid conveying the entire
VLAN to spanning tree mapping in each BPDU, bridges encode an MD5 digest of their VLAN to instance
table in the MSTP BPDU. This digest is then used by other MSTP bridges, along with other
administratively configured values, to determine if the neighboring bridge is in the same MST region as
itself.
MSTP packets are as follow:
74

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tenda TEG3224P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tenda TEG3224P in de taal/talen: Engels als bijlage per email.

De handleiding is 8,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info