785925

Temptech OSLO SERIES Handleiding

52
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
This manual contains important information including safety and
installation instructions of the appliances. Please read it carefully before
use and follow all safety information & instructions. It is recommended
to keep this manual for easy reference so that you can be familiar with the
operation of the appliance.
V1/2021
OSLO SERIES
ELEGANCE SERIES
COPENHAGEN SERIES
USER MANUAL
Wine Coolers
--CONTENTS--
01 ENERGY SAVING AND ECOLOGICAL PROTECTION
02 IMPORTANT SAFETY INFORMATION
05 SCRAPPING OLD APPLIANCES
05 Conformity
05 Energy Saving
06 Service
06 DESCRIPTION OF APPLIANCE & INSTALLATION
06 OZ45SB / OZ45SX / OZ45SW
08 OZ45SBTOP
09 OZ60SB / OZ60DB / OZ60DW / OZ60DX
10 OZ90SB / OZ90DB / OZ90DW / OZ90DX
12 OZ124SB / OZ124DB / OZ124DW / OZ124DX
14 OX15SRB
14 OX30DRB / OX30DRW / OX30DX
15 CPROX60SRB / CPROX60SX
16 OX60DRB / OX60DRW / OX60DX
16 EX60DRB / EX60DRW / EX60DX
17 CPRO1800SRB / CPRO1800SX
18 E1000DRB / E1000DRW /E1000DX
19 ACCESSORY INSTALLATION BEFORE OPERATING
19 UNPACKING AND CLEANING THE WINE COOLER
19 Adjusting the height and levelling o your wine cabinet
20 Installing The Handle
21 LOCK & UNLOCK THE DOOR (FOR OPTION)
21 OPERATING THE WINE COOLER
21 WORKING CLIMATE
21 WINE STORAGE
23 CONTROL PANEL (Fixed Speed Compressor Control In Cabinet)
23 POWER ON/OFF CONTROL
24 UNLOCKING THE CONTROL PANEL
24 INTERIOR LIGHTING ON/OFF CONTROL
24 TEMPERATURE DISPLAY WINDOW
24 TEMPERATURE SETTING
25 SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
25 FUNCTION INDICATING LIGHT
26 CONTROL PANEL ( Inverter Compressor Control In Cabinet)
26 POWER ON/OFF CONTROL
27 UNLOCKING THE CONTROL PANEL
27 INTERIOR LIGHTING ON/OFF CONTROL
27 RGB LIGHTING CONTROL
28 TEMPERATURE DISPLAY WINDOW
28 TEMPERATURE SETTING
28 SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
29 SELECTING SET TEMPERATURE & ACTUAL TEMPERATURE
29 SELECTING ENERGY SAVING MODE
29 FUNCTION INDICATING LIGHT
31 POWER ON/OFF CONTROL
31 INTERIOR LIGHTING ON/OFF CONTROL
31 UNLOCKING THE CONTROL PANEL
31 SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
32 TEMPERATURE SETTING
32 TEMPERATURE DISPLAY WINDOW
33 CARE AND MAINTENANCE
33 CLEANING THE WINE COOLER
34 REMOVING THE SHELVES
34 Carbon Filter Change (Option)
35 Defrosting
35 Moving Your Wine Cooler
35 Power Failure
36 Vacation Time
36 Disconnecting From Power
37 TROUBLESHOOTING
38 REVERSE THE DOOR SWING
38 For Built In Series (Except OZ45SBTOP)
40 For Built Under Series (Control in Cabinet)
45 CPRO1800SRB / CPR01800SX
49 INSTALL REMOVABLE FRONT GRILLE
51 DOWNLOAD OTHER LANGUAGE USER MANUAL

• Please removed all packaging, stickers and films from the products surface and clean the
product’s surfaces with a damp cloth and mild deturgent before using for the first time.
• Let the appliance stand upright for approximately 24 hours before connecting it to the
power source, which helps to reduce the possibility of a cooling-system malfunction from
handling during transportation.
Before using your Wine Coolers, please carefully read this instruction manual
in order to maximize its performance. Store all documentation for subsequent
use or for other owners.This product is intended solely for household use or similar
applications such as:
--the kitchen area for personnel in shops, oces and other working environments
--on farms, by clientele of hotels, motels and other environments of a residential type
--at bed and breakfasts (B & B)
--for catering services and similar applications not for retail sale.
This appliance is intended to be used exclusively for the storage of wine or beverage,
any other use is considered dangerous and the manufacturer will not be responsible for
any omissions. Also, it is recommended that you take note of the warranty conditions.
ENERGY SAVING AND ECOLOGICAL PROTECTION
Please pay attention to the following special instructions for saving energy
and ecological protection:
(a) The most energy-saving configuration requires shelves to be
positioned in the appliance, please refer to the corresponding pictures in
the manual.
(b) Please follow all the instructions in this manual on where and how
to store wines in a the appliance for best preservation over the longest
period, to avoid food waste;
(c) Please follow all the instructions in this manual on the recommended
setting of temperatures in each compartment for optimum food
preservation.
(d) An estimation of the impact of temperature settings on food waste: for
the best storage time of wines, please consult your wine labels; the best
storage time may reduce under other un-recommended temperature
settings.
(e) The appliance has no special modes and features that can affect
temperatures.
(f) This appliance is intended to be used exclusively for the storage of

INSTRUCTION MANUAL
wine
(g) Please follow all the instructions in this manual for the correct
installation and end-user maintenance, including cleaning, of the
refrigerating appliance;
(h) FOR a free standing appliance: this refrigerating appliance is not
intended to be used as a built-in appliance.
(i) This refrigerating appliance is not suitable for freezing foodstuffs.
(j) Access to professional repair: https://service.temptech.no/
(k) Ordering spare parts: Please send emails to Service@temptech.no
(l) The minimum period during which spare parts, necessary for the repair
of the appliance, are available:
Thermostats, temperature sensors, printed circuit boards and light sources
are available for a minimum period of seven years after placing the last
unit of the model on the market.
Door handles, door hinges, trays and baskets for a minimum period of
seven years and door gaskets for a minimum period of 10 year, after
placing the last unit of the model on the market
(m) The minimum duration of the guarantee of the refrigerating appliance
offered by the manufacturer, importer or authorised representative:
Minimum guarantee is: 5 years for Norway, Sweden, Finland and Denmark.
(n) For appliances with climate class :
- Extended temperate: ‘this refrigerating appliance is intended to be used
at ambient temperatures ranging from 10 °C to 32 °C’;
- Temperate: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C’;
- Subtropical: ‘this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 °C to 38 °C’;
- Tropical: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C’;
(o) How to nd the model information in the product database: Please visit
our website https://temptech.no/ to nd the instruction about how to nd
production information in EU database.
IMPORTANT SAFETY INFORMATION
The Wine Coolers contains a refrigerant gas (R600a: isobutane) and
insulating gas (cyclopentane), with high compatibility with the environment,
that are, however, inammable.

We recommend that you follow the following regulations so as to avoid
situations dangerous to you:
Before performing any operation, unplug the power cord from the power
socket.
● The refrigeration system positioned behind and inside the Wine Coolers
contains refrigerant. Therefore, avoid damaging the tubes.
● If in the refrigeration system a leak is noted, do not touch the wall outlet
and do not use open ames. Open the window and let air into the room.
Then call a service centre to ask for repair.
● Do not scrape with a knife or sharp object to remove frost or ice that
occurs. With these, the refrigerant circuit can be damaged, the spill from
which can cause a re or damage your eyes.
● Do not install the appliance in humid, oily or dusty places, nor expose it
to direct sunlight and to water.
● Do not install the appliance near heaters or inammable materials.
● Do not use extension cords or adapters.
● Do not excessively pull or fold the power cord or touch the plug with wet
hands.
● Do not damage the plug and/or the power cord; this could cause electrical
shocks or res.
● It is recommended to keep the plug clean, any excessive dust residues on
the plug can be the cause re.
● Do not use mechanical devices or other equipment to hasten the defrosting
process.
● Absolutely avoid the use of open ame or electrical equipment, such as
heaters, steam cleaners, candles, oil lamps and the like in order to speed
up the defrosting phase.
● Do not use or store inflammable sprays, such as spray paint, near the
Wine Coolers. It could cause an explosion or  re.
● Do not use electrical appliances inside the food storage compartments,
unless they are of the type recommended by the manufacturer.
● Do not place or store inflammable and highly volatile materials such
as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure
alcohol, etc. These materials may cause an explosion.
● Do not store medicine or research materials in the Wine Coolers. When
the material that requires a strict control of storage temperatures is to
be stored, it is possible that it will deteriorate or an uncontrolled reaction
may occur that can cause risks.
● Maintain the ventilation openings in the appliance enclosure or in the

INSTRUCTION MANUAL
built-in structure, free of obstruction.
● Do not place objects and/or containers lled with water on the top of the
appliance.
● Do not perform repairs on this Wine Coolers. All interventions must be
performed solely by qualied personnel.
● This appliance can be used by children aged from 8 years and above
and by persons with reduced physical, sensory or mental capabilities or
with a lack of experience and knowledge; provided that they have been
given adequate supervision or instruction concerning how to use the
appliance in a safe way and understand the hazards involved.
● Children should not play with the appliance. Cleaning and user
maintenance should not be made by children without supervision
● This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
● The appliance must be positioned so that the plug is accessible
● If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
● The appliance shall not be installed in the laundry
● GWP for R600a: 3
● Do not store explosive substances such as aerosol cans with a ammable
propellant in this appliance.
– WARNING: Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
– WARNING: Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
– WARNING: Do not damage the refrigerant circuit.
– WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer

SCRAPPING OLD APPLIANCES
This appliance is marked according to the European directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative
consequences for the environment) and basic components (which can
be re-used). It is important to have WEEE subjected to specic treatments,
in order to remove and dispose properly all pollutants, and recover and
recycle all materials.
Individuals can play an important role in ensuring that WEEE does not
become an environmental issue; it is essential to follow some basic rules:
--WEEE should not be treated as household waste;
--WEEE should be handed over to the relevant collection points managed
by the municipality or by registered companies. In many countries, for
large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be
returned to the retailer who has to collect it free of charge on a one-to-one
basis, as long as the equipment is of equivalent type and has the same
functions as the supplied equipment.
Conformity
By placing the marking on this product, we declare, on our own responsibility,
compliance to all of European safety ,health and environmental requirements stated in
the legislation for this product.
Energy Saving
--Always ensure good ventilation. Do not cover ventilation opening or grille.
--Always keep fan louvers clear.
--Do not place appliance in areas of direct sunlight or close to a stove,
heather or similar object.
--Open or keep the doors open as little as possible
--Remove dust present on the rear of the appliance

INSTRUCTION MANUAL
Service
● You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Customer Care Department
DESCRIPTION OF APPLIANCE & INSTALLATION
The following pictures only show description of appliance. The dimension and shelf
quantity may dier among the models of the same series.
OZ45SB / OZ45SX / OZ45SW
A.
C.
B.
D.
E.
Control Panel
Glass Door
Beech Shelves
Handle
Gasket
A
D
B
C
BE
Single Zone 18 Bottles

560~564
600~615
>560
200cm² Min.
200cm² Min.
452
465
555
555
590
455
450
2mm
7
20
To fix the appliance with Cabinet, pls. screw the 4 screws (ST4.2*12mm)
through the Top Bracket. The Top Bracket is pre-installed on top of
appliance.
A Top Bracket B Screws ST*mm

INSTRUCTION MANUAL
OZ45SBTOP
Control Panel
Handle
Long Shelf
Gasket
Door
Outside Cabinet
Condenser
Single Zone 24 Bottles
8
45
600
460
560-564
460
555
566
520
440
448
588
458
600
45
8
200cm² Min.
4
For a rmly xing of the unit you can install an extra Top Mounting
Bar which is an accessory packed with the unit onto the topside of
the unit and screw it with the kitchen cabinet See right drawing

OZ60SB / OZ60DB / OZ60DW / OZ60DX
1Control Panel 5 Glass Door
2Beech Shelves (Long) 6Handle
3Separator (Dual Zone) 7Gasket
4Beech Shelves (Short) 8Feet
Single Zone Dual Zone
30 Bottles 28 Bottles Single & Dual Zone
1
3
2
4
5
6
8
7
>580
570
20
560~565
605
200cm² Min.
(Hot Air Outlet)
200cm² Min.
(Cool Air Inlet)
8
B
8
590
555
590
567
594
A
B
602
>595
594
A

INSTRUCTION MANUAL
To fix the appliance with Cabinet, pls. screw the 4 screws (ST4.2*12mm)
through the Top Bracket. The Top Bracket is pre-installed on top of
appliance.
A Top Bracket B Screws ST*mm
OZ90SB / OZ90DB / OZ90DW / OZ90DX
1Control Panel(Single Zone) 5 Glass Door
2Beech Shelves (Long) 6Handle
3Separator (Dual Zone) 7Gasket
4Beech Shelves (Short) 8Feet
Single Zone Dual Zone
47 Bottles 41 Bottles
Single & Dual Zone
1
3
2
4
5
6
8
7

To fix the appliance with Cabinet, pls. screw the 3 screws (ST4.2*12mm)
through the Top Bracket. The Top Bracket is pre-installed on top of appliance.
≥570
20
600~605
560~565
200cm² Min.
(Hot Air Outlet)
200cm² Min.
(Cool Air Inlet)
897
>890
8
A
8
570
590
555
885
862
889
A
Top Bracket
Screws
(ST4.2*12mm)

INSTRUCTION MANUAL
OZ124SB / OZ124DB / OZ124DW / OZ124DX
1
3
2
4
5
6
8
7
1Control Panel (Single Zone) 5 Glass Door
2Beech Shelves (Long) 6Handle
3Control Panel (Dual Zone) 7Gasket
4Beech Shelves (Short) 8Feet
Single Zone Dual Zone
81 Bottles 74 Bottles Single & Dual Zone

To fix the appliance with Cabinet, pls. screw the 3 screws (ST4.2*12mm)
through the Top Bracket. The Top Bracket is pre-installed on top of
appliance.
20
>580
570
25
605
200cm² Min.
(Hot Air Outlet)
200cm² Min.
(Cool Air Inlet)
8
B
A
590
555
1210
1237
1233
1245
>1238
A
B
8
560~565
Top Bracket
Screws
(ST4.2*12mm)

INSTRUCTION MANUAL
OX15SRB
Control Panel
Chrome Shelf
Front Louver
Adjustable Foot
Outside Canbinet
Handle
Door
Gasket
Single Zone 6 Bottles
50
820
800
148
475
525
148
88
150
>525
Min 40mm
>813
•Height Adjustable:
813-863mm
OX30DRB / OX30DRW / OX30DX
Control Panel
Long Shelf
Short Shelf
Front Louver Adjustable Foot
Outside Cabinet
Handle
Door
Gasket
17 Bottles
Dual Zone

295
570
520
800
813
75
294
70
305
>570
>813
Min 40mm
•Height Adjustable:
813-845mm
CPROX60SRB / CPROX60SX
Control Panel
Single Zone 40 Bottles Single Zone
Long Shelf
Short Shelf
Front Louver
Outside Canbinet
Handle
Door
Gasket
Foot
Adjustable
>600
>813
>570
Min 40mm
A
•Height Adjustable:
813-845mm

INSTRUCTION MANUAL
OX60DRB / OX60DRW / OX60DX
Control Panel
Dual Zone 46 Bottles
Long Shelf
Short Shelf
Front Louver
Outside Canbinet
Handle
Door
Gasket
Foot
Adjustable
>600
>813
>570
Min 40mm
A
•Height Adjustable:
813-845mm
EX60DRB / EX60DRW / EX60DX
Control Panel
Dual Zone 46 Bottles
Long Shelf
(W/ 3-fold Rail)
Short Shelf
(W/ 2-fold Rail)
Front Louver
Outside Canbinet
Handle
Door
Gasket
Foot
Adjustable

>600
>863
>570
Min 40mm
570
850
863
150
•Height Adjustable:
863-883mm
CPRO1800SRB / CPRO1800SX
SingleZone 143 Bottles
Control Panel
Vintage
Shelf
Front Louver
Handle
Door
Gasket
Foot
Adjustable
Outside Canbinet

INSTRUCTION MANUAL
≥1835mm
(72 ¼”)
≥
695mm
(27 ¼”)
1835mm
(72 ¼”)
655mm
(25 ¾”)
≥
730mm
(28 ¾”)
680mm
26 ¾”
E1000DRB / E1000DRW /E1000DX
Control Panel
Dual Zone 181 Bottles
Long Shelf
Short Shelf
Front Louver
Outside Canbinet
Handle
Door
Gasket
Foot
Adjustable

≥1835mm
(72 ¼”)
≥
695mm
(27 ¼”)
1835mm
(72 ¼”)
655mm
(25 ¾”)
≥
730mm
(28 ¾”)
680mm
26 ¾”
ACCESSORY INSTALLATION BEFORE OPERATING
UNPACKING AND CLEANING THE WINE COOLER
• Remove the exterior and interior packing materials.
• Let the appliance stand upright for approximately 24 hours before connecting
it to the power source, which helps to reduce the possibility of a cooling-system
malfunction from handling during transportation.
• Use a soft cloth to clean the interior surface with lukewarm water.
For all models except OZ45SB, OZ45SW, OZ45SX, OZ45SBTOP,
OZ60SB, OZ60DB, OZ60DX, OZ60DW, OZ90DB, OZ90DX, OZ90DW,
OZ124SB, OZ124DB
IMPORTANT: The front louver at the base of the appliance is for ventilation. Nothing
should be placed in front of this front louver; otherwise your Wine Cooler may not
operate properly.
o A decorative plinth can be tted to the front of the base vent, a cut-out
should be made in the plinth with bigger size than the front louver. The
cut out is required whether the front louver is removed or not.
Adjusting the height and levelling o your wine cabinet
For all models except OZ45SB, OZ45SW, OZ45SX, OZ45SBTOP,
OZ60SB, OZ60DB, OZ60DX, OZ60DW, OZ90DB, OZ90DX, OZ90DW,

INSTRUCTION MANUAL
OZ124SB, OZ124DB
o The appliance is equipped with adjustable feet, so that the height may
be adjusted to level the cabinet on uneven oor surfaces.
o We recommend that two people carry out this procedure.
o The height must be adjusted prior to building the appliance into the
housing unit and it should be set at such a height that the top panel of
the appliance ts exactly below the kitchen worktop.
o Tilt the appliance approximately 60° to allow access
to the adjustable feet.
o Take care to ensure the cabinet is supported at all
times.
o Twist the foot into a suitable position to level the
cabinet.
o Repeat these steps for the other adjustable feet.
IMPORTANT: If the appliance is not level, then the door and door seal may be
aected.
IMPORTANT: Do not move the appliance when the feet are adjusted high.
Installing The Handle
Gasket
Washer
Handle Screws
Handle
● Remove the door Gasket slightly to expose the two screw holes.

●Fix the Handle by screwing the two Handle Screws tightly, the Handle Screws with
Washers are pre-installed inside the screw holes, pls.do not unscrew the Handle
Screws too much in case the Washers fell o.
● Replace the Gasket.
LOCK & UNLOCK THE DOOR (FOR OPTION)
●Lock is an optional function. If your Wine Cooler has such function, a key should be
attached inside the packing of this Manual.
●Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock
it, please turn clockwise. Please save the key well.
OPERATING THE WINE COOLER
WORKING CLIMATE
• The appliance is designed for operating from SN to N climate (see below climate class
chart). It is recommended to maintain the ambient around 22-25°C which helps the
appliance working with low power consumption.
Klimaklasse Romtemperatur
SN 10 - 32 °C (50ºF-90ºF)
N 16 - 32 °C (61ºF-90ºF)
ST 16 - 38 °C (61ºF-100ºF)
T 16 - 43 °C (61ºF-109ºF)
• If the ambient temperature is above or below the designed climate range, the
performance of the unit may be affected. For example, the appliance operating in
extreme cold or hot conditions may cause interior temperatures to uctuate, and the
temperature set 5-20°C may not be reached sometimes.
WINE STORAGE
• The standard shelves are designed perfectly for Bordeaux bottle storage. The
maximum loaded bottles may vary subject to the different size or dimension wine
bottles you store.
• The shelves is allowed to be pulled out by about 1/3 length of it for easy access to the
wine storage.

INSTRUCTION MANUAL
Stopper
Stopper
• To prevent damaging the door gasket, make sure to have the door opened fully all
the way before pulling the shelves out.
• Please store wine in sealed bottles.
• Do not cover the shelves with aluminum foil or any other shelf material which may
prevent air circulation.
• Should the wine cooler be left empty for long periods it is suggested that the
appliance is unplugged, and after careful cleaning, leave the door ajar to allow air to
circulate inside the cabinet in order to avoid possible condensation, mold or odours
forming.
• If the wine cooler is left empty for long periods, switch o, defrost, clean, dry, and
leave the door open to prevent mould developing within the appliance.
• Pay attention to the recommended/preferable storage time of the wines you bought
• Opening the door for long periods can cause a signicant increase of the temperature
in the compartments of the appliance. The recommended temperatures for chilling，
storing your wines is as below, please choose zones and temperatures accordingly..
• Recommended temperatures for chilling/storing your wines.
Wine Type Recommender Temp
Red Wines 15 - 18ºC (59ºF-64ºF)
Dry⁄White Wines 9 - 14ºC (48ºF-57ºF)
Rose Wines 10 - 11ºC (50ºF-52ºF)
Sparkling Wines 5 - 8ºC (41ºF-46ºF)

CONTROL PANEL (Fixed Speed Compressor Control In Cabinet)
• Single Zone OX15SRB
A Power B Lighting C Display Window D Temp Plus E TempMinus
F Lock ⁄ Unlock G Function Indicator H ºC/ºF Switch
A B D
C E
FG H
• Dual Zone OX30DRB / OX30DRW / OX30DX
A Power B Lighting C Upper Zone
Display Window D Temp Plus E TempMinus
F Lock⁄
Unlock G ºC/ºF
Switch H Function
Indicator  I Lower Zone
Display Window J Function
Indicator  K Zone Select
A B DC E
FG H I J K
POWER ON/OFF CONTROL
• When the appliance is plugged in to a power outlet, it powers on automatically.
• Touch the power mark and hold for 10 seconds to turn off (or turn on) the
appliance.
• No matter it is under a locked or unlocked condition, you can turn o the appliance
by touching the power mark and holding for 10 seconds.
Warning: To avoid damaging the compressor, please do not turn on the
appliance again within 5 minutes after you turn it o.

INSTRUCTION MANUAL
UNLOCKING THE CONTROL PANEL
• To unlock the control panel, touch the power mark and lighting mark
with 2 ngers at the same time and hold for 3 seconds . When unlocked a buzz sound
will be heard.
• The control panel will be automatically locked with a buzz sound heard after 10
seconds without being touched.
• Under the locked condition, the control panel will not react to any touching order for
Lighting On/O and Temperature Setting.
INTERIOR LIGHTING ON/OFF CONTROL
• Under the unlocked condition, touch the lighting mark to turn on (or turn o) the
interior cool LED lighting.
• The lighting will stay on unstil it is manually turned o.
TEMPERATURE DISPLAY WINDOW
• The temperature is displayed in digital which is the best way to be read out. The
digital is shown as the set temperature when you are setting the temperature.
• When the temperature probe is out of order, the display window will show with “HH”
or “LL” instead of a digital gure while continuous buzz sound will be heard. In case
of this happens, this appliance is considerately designed to keep periodical running
of compressor and fans which helps to keep the coldness of the inside cabinet to
protect your stored wines.
Warning: To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical running
can not ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
For Single Zone
• The default temperature setting range is : 5-20 ºC (41-68 ºF).
• Directly touch the or mark to set the wine cooler temperature as you want.
• The rst touch on or mark will recall the previous set temperature displayed.
• Touch the mark to increase the set temperature by 1ºC (or by 1ºF). On the
contrary, touch the mark to decrease the set temperature by 1ºC (or by 1ºF).
For Dual Zone
• The default temperature setting ranges are : 5-12 ºC (41-54 ºF) for the upper zone
and 12-20 ºC (54-68 ºF) for the bottom zone.
• You need to select the set zone by touching the mark before touching the mark

or to set the desired temperature. The zone temperature will ash when it is
ready to be set.
• The rst touch on mark or will recall the previous set temperature displayed
in the digital window.
• Touch the mark to increase the set temperature by 1ºC (or by 1ºF). On the
contrary, touch the mark to decrease the set temperature by 1ºC (or by 1ºF).
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks with 2 ngers at the same time and hold for 5 seconds, you
can interchange the Fahrenheit and Celsius display.
For Dual Zone
Directly touch the mark , you can interchange the Fahrenheit and Celsius display
for both zones at the same time.
FUNCTION INDICATING LIGHT
For Single Zone
Function
Indicator
o When the compressor starts to work, the Indicator will stay
on;
o In other conditions, the Indicator will be off.
For Dual Zone
Function
Indicator
2
Function
Indicator 1
o The Indicator 1 will ash every 2 seconds when
the unit is plugged in;
o The Indicator 1 will stay on when the compressor
starts to work;
o The Indicator 2 will ash every 3 seconds when
the heating function of lower zone starts to work;
o The Indicator 2 will stay on when the cooling
function of lower zone starts to work.

INSTRUCTION MANUAL
CONTROL PANEL ( Inverter Compressor Control In Cabinet)
• For Single Zone
includes: OZ45SB / OZ45SW / OZ45SX / CPROX60SRB / CPROX60SX /
CPRO1800SRB / CPRO1800SX
A B DC E
A Power B Lighting C Display Window D Temp Plus
E TempMinus A+B Lock ⁄ Unlock D+E ºC/ºF Switch
• For Dual Zone
includes: OX60DRB / OX60DRW / OX60DX
A Power B Lighting C Lock ⁄ Unlock D Temp Plus E TempMinus
F Zone Select G Upper Zone H Lower Zone D+E ºC/ºF Switch
A B DC E
G H
POWER ON/OFF CONTROL
• When the appliance is plugged in to a power outlet, it powers on automatically.
• Touch the power mark and hold for 10 seconds to turn off (or turn on) the
appliance.
• No matter it is under a locked or unlocked condition, you can turn o the appliance
F

by touching the power mark and holding for 10 seconds.
Warning: To avoid damaging the compressor, please do not turn on the
appliance again within 5 minutes after you turn it o.
UNLOCKING THE CONTROL PANEL
• For single zone, touch the power mark and lighting mark with 2 ngers at the
same time and hold for 3 seconds . When unlocked a buzz sound will be heard.
• For dual zone, touch the lock mark and hold for 3 seconds . When unlocked a buzz
sound will be heard.
• Under the locked condition, the control panel will not react to any touching order for
Lighting On/O and Temperature Setting.
INTERIOR LIGHTING ON/OFF CONTROL
• Under the unlocked condition, touch the lighting mark to turn on (or turn o) the
interior cool LED lighting.
• The lighting will stay on unstil it is manually turned o.
• The illumination of the appliance employs a two-stage loop control. The illumination
will be 100% bright when you touch the lightning mark for the first time. The
brightness will switch to 50% when you touch the mark for the second time. And
the illumination lamps will all go out for the third time when you touch the key. The
control is in loop for the subsequent operation.
RGB LIGHTING CONTROL
Light
• Your wine cellar comes equipped with 4 dierent lighting options: White,
Warm White, Blue, or a 3 color cycle where the color changes every
10 seconds. Press the light button once and the lights will run on a
10-second cycle, alternating between White & Warm White & Blue. Press
the light button again and the color will change to only White. Press
the light button again and the color will change to Warm White. Press
the light button again, the color will change to Blue. Finally, pressing a
button a 5th time will turn o the lights.
White Warm White Blue 3 color cycle
OFF

INSTRUCTION MANUAL
TEMPERATURE DISPLAY WINDOW
• The temperature is displayed in digital which is the best way to be read out. The
digital is shown as the set temperature when you are setting the temperature.
• When the temperature probe is out of order, the display window will show with “HH”
or “LL” instead of a digital gure while continuous buzz sound will be heard. In case
of this happens, this appliance is considerately designed to keep periodical running
of compressor and fans which helps to keep the coldness of the inside cabinet to
protect your stored wines.
Warning: To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical running
can not ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
For Single Zone
• The temperature setting range is 5-20 ºC (41-68 ºF).
• Directly touch the or mark to set the wine cooler temperature as you want.
• The rst touch on or mark will recall the previous set temperature displayed.
• Touch the mark to increase the set temperature by 1ºC (or by 1ºF). On the
contrary, touch the mark to decrease the set temperature by 1ºC (or by 1ºF).
For Dual Zone
• The temperature setting ranges are 5-20 ºC (41-68 ºF) for both upper zone and lower
zone.
• You need to select the set zone by touching the mark before touching the mark
or to set the desired temperature. The zone temperature will ash when it is
ready to be set.
• The rst touch on mark or will recall the previous set temperature displayed
in the digital window.
• Touch the mark to increase the set temperature by 1ºC (or by 1ºF). On the
contrary, touch the mark to decrease the set temperature by 1ºC (or by 1ºF).
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
• Touch the marks with 2 ngers at the same time and hold for 3 seconds, you
can interchange the Fahrenheit and Celsius display.

SELECTING SET TEMPERATURE & ACTUAL TEMPERATURE
For Single Zone
• When locked condition, press the marks + with 2 ngers at the same time
and hold for 5 seconds, you'll enter the selecting when you heard a BI sound.
• Press the mark to choose '01' or '02 ' mode as you desired.
• If the display window will ash '01', which means the display mode is showing actual
temperature.
• If the display window will flash '02', which means the display mode is showing set
temperature.
• Leave the display windows ashing for 5 seconds with a sound of beep to conrm
the setting.
SELECTING ENERGY SAVING MODE
• Display screen mode setting: When system is in locked-state, steadily press the
mark for 3 seconds, with a sound of buzzer beeping, the indicator LED8 will light
up, indicating that system has changed to screen-off mode. In the same way, the
indicator LED8 will be extinguished with a sound of buzzer beeping when system has
been switched into screen-always-on mode.
• When you touch the power key in the condition of screen-o mode, the backlight
lamps of the keys and the digital display screen will all go out.
• When you touch the power key in the condition of screen-always-on mode, all the
backlight lamps of the keys will go out, the digital display screen will keep lighting.
• When system is in screen-o mode, touching any key will light the display screen.
FUNCTION INDICATING LIGHT
For Single Zone
Function
Indicator
o When the compressor starts to work, the Indicator will stay
on;
o In other conditions, the Indicator will be off.

INSTRUCTION MANUAL
For Dual Zone
Function
Indicator
o When the compressor starts to work, the
Indicator will stay on;
o In other conditions, the Indicator will be off.
CONTROL PANEL (Inverter Compressor Control On Door)
• Single Zone OZ45SBTOP
Power °C⁄°F
Set Temp Actual Temp
TempUp TempRange SetDisplay Window
TempDownLight Unlock On⁄O Set
• Dual zone EX60DRB / EX60DRW / OX60DX / E1000DRB /E1000DRW /E1000DX
Power °C⁄°F
Upper Zone Lower Zone
TempUp TempRange SetDisplay Window
TempDownLight Unlock On⁄O Set

POWER ON/OFF CONTROL
POWER
• Press to turn on the control panel back light buttons if they are o.
• To turn o your wine cellar for cleaning or extended absence, press the
power button once. After the unit beeps once, hold the power button for
10 seconds and your wine cellar will shut itself o. Once the wine cellar
has been turned off, please allow at least 5 minutes before starting up
again. This will limit excessive wear on the compressor.
Warning!
To avoid damaging the compressor, please do not turn on the appliance
again within 5 minutes after you turn it o.
INTERIOR LIGHTING ON/OFF CONTROL
Light
• Your wine cellar comes equipped with 3 dierent lighting options: Red,
Blue, or a Red & Blue cycle where the color changes every 10 seconds.
Press the light button once and the lights will run on a 10-second cycle,
alternating between Red & Blue. Press the light button again and the
color will change to only Blue. Press the light button again and the color
will change to Red. Finally, pressing a button a 4th time will turn o the
lights.
Blue Red O Red/Blue (Interchange by 10s)
UNLOCKING THE CONTROL PANEL
Unlock
• Press for 3 seconds to lock/unlock the control panel.
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
°C/°F
• Press to alter the temperature display in Fahrenheit or Celsius.

INSTRUCTION MANUAL
TEMPERATURE SETTING
Set
For Single Zone
• Press to set temperature. The digital ashes to inform the accessibility to
adjust setting.
For Dual Zone
• Press to select Upper/Lower zone for setting temperature. The digital
display ashes to inform the accessibility to adjust setting.
Temp.Up
• Press to increase setting temperature by 1o.
Temp.
Down
• Press to decrease setting temperature by 1o.
TEMPERATURE DISPLAY WINDOW
For Single Zone
• Display Window is on.
• Display Window is O
• Actual temperature of the wine cellar.
• Set temperature of the wine cellar.
The temperature display will show the set temperature when the Wine Cooler control
panel is unlocked and selected to be reset, and show the actual temperature when the
control panel is locked.

For Dual Zone
• Display Window is on.
• Display Window is O
• Set temperature of Lower Zone
• Set temperature of Upper Zone
The display window can be set to the off position for a less obtrusive appearance.
Your Wine Cooler will continue to run, but the Wine Coolers display window will not
be visible. You can check the temperature of the Wine Cooler by pressing the Power
button.
To set the display window to either on or o, press °C/°F button for 5 seconds while the
control panel is locked.
Once the ON/OF indicator ashes, press °C/°F a second time to enter into the option
interface. “ON” will show the display window at all times while “OF” will turn off the
display window. Leave the control panel untouched for 5 seconds to confirm your
option.
Note:
Temperatures may uctuate depending on whether the interior light is ON or OFF and
depending on the position of the bottles.
CARE AND MAINTENANCE
CLEANING THE WINE COOLER
• Turn o the power, unplug the appliance, and remove all items including shelves.
• Wipe the inside surfaces with a sponge and baking soda solution. The solution should
be about 2 tablespoons of baking soda to 1 quart (approx. 1 litre) of warm water.
• Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before
placing back into the wine cooler.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or
any electrical parts.
• Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with
a clean soft cloth.
• Do not use steel wool or steel brush on the stainless steel. These will scratch the
stainless steel with steel particles and rusting may occur.

INSTRUCTION MANUAL
REMOVING THE SHELVES
• Before removing a Shelf from the appliance, it is necessary to remove all the bottles
on the Shelf ;
• For a model without Telescopic Rail, move the shelf to the position where the cut
of the wooden shelf is directly under the plastic stopper and lift the wooden shelf.
Please ensure these are replaced when the shelf is put back.
• Make sure the shelves are fully engaged before loading any bottle into the cabinet.
Pull the shelves out all the way to the STOPPER position and push them back in
several times to make sure the shelves are properly engaged.
BA
A Cut B Plastic Stopper
• For a model with Telescopic Rail, pls. lift the whole Shelf upwards horizontally
to get it o from the 4 Locating Pins of Telescopic Rail.
Stopper
Locating Pin
Cut
Carbon Filter Change (Option)
A good ambient air quality is important for wine maturing. The Carbon Filter
is very helpful to absorb odor and improve air quality.For the models with
Carbon Filter, we suggest to replace it once a year.Pls.contact your dealer
to get the lter.

Removing the Carbon Filter:
o Hold the Carbon Filter and turn it 90° to the left or
right to Remove it;
Reinstalling the Carbon Filter:
o Hold the Carbon Filter and turn it 90° to the left or
right until it clicks into place.
Defrosting
o Defrosting occurs automatically inside of the Wine Cooler during operation. The
defrost water is collected by the evaporating tray and evaporates automatically.
o The evaporating tray and defrost water drain hole should be cleaned
periodically. This will prevent water from collecting in the bottom of the
Wine Cooler, instead of owing down the defrost drainage channel and
drain hole.
o You can also pour a small amount of water down the drain hole to clean
inside of it.
o You should be careful to make sure that wine bottles do not touch the
rear wall of the appliance, as this can interrupt the automatic defrosting
process and deect water into the base of your Wine Cooler.
Moving Your Wine Cooler
If you need to move your Wine Cooler to another location you should
follow the steps outlined below.
o Remove all items from the Wine Cooler.
o Securely tape down all loose items such as the shelves inside of the
appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a blanket
or similar item.
Power Failure
o If power is cut to the appliance, for a few hours it will be able to maintain
the temperature inside the cabinet. Providing that the number of times
that the door is opened is kept to a minimum.

INSTRUCTION MANUAL
o If the power cut is for longer than a few hours, then you will need to store
the contents in an alternate location to prevent them being affected by
temperature rise.
IMPORTANT: If the appliance is unplugged, the power is lost or turned o you must
wait 5 minutes before restarting the Wine Cooler. If you attempt to restart before this
time delay, the compressor could be damaged.
Vacation Time
Short vacations: Leave the Wine Cooler in operation for holidays of less than 3 weeks.
Long vacations:
o If your appliance is not going to be in use for a period of time, you should
remove the bottles of wine and switch off the appliance
o The interior should be cleaned with a solution of bicarbonate of soda
and lukewarm water.
o The interior should then be thoroughly dried.
o To prevent mould growth, the door should be left slightly ajar.
Disconnecting From Power
o If the unit is unplugged, or there is a power cut, you must wait for 5
minutes before restarting. Attempting to restart the Wine Cooler before 5
minutes has elapsed, may cause it not to function.

TROUBLESHOOTING
If you feel the appliance is not working properly, follow these instructions to try to see
if you can solve the problem simply by yourself before calling for service.
No. PROBLEM PROBLEM POSSIBLE CAUSE / MEASURE
The wine cooler does not operate
Not plugged in
The appliance is turned o
The circuit breaker tripped or a blown fuse
The wine cooler is not cold enough
Check the temperature control setting
External environment may require a higher setting
The door is opened too frequently
The door is not closed completely
The door gasket does not seal properly
Automatically turnon and
turno frequently
The room temperature is hotter than normal
A large amount of contents has been added to the wine
cooler
The door is opened too frequently
The door is not closed completely
The temperature control is not set correctly
The door gasket does not seal properly
The lighting does not work
Not plugged in
The circuit breaker tripped or a blown fuse
The lighting is turned o
Too much vibration
Check to assure that the appliance is level
Check to assure no parts inside the cabinet or in the
compressor chamber are loose
The wine cooler seems to make
too much noise
The rattling noise may come from the flow of the
refrigerant which is normal
As each cycle ends you may hear gurgling sounds
caused by the ow of refrigerant
Contraction and expansion of the inside walls may
cause popping and crackling noises
The appliance is not level
The door will not close properly
The wine cooler is not level
The door was reversed and not properly installed
The gasket is dirty
The shelves are out of position
The display window is shown with “HH”
or “LL” instead of a digital gure
and⁄or with continuous buzz sound
The temperature probe is out of order

INSTRUCTION MANUAL
REVERSE THE DOOR SWING
Remarks:
●The following operations are available for a model with control in cabinet only and
with Right Door Hinge installed.
●All removed parts must be saved in order to do the door reinstallation.
For Built In Series (Except OZ45SBTOP)
o Unscrew the 4 screws from the upper hinge and bottom hinge of door.
Remove the door and place it on a soft surface carefully.
o Unscrew the 3 screws from Top Bracket, move the bracket to the right
end and screw the 3 crews.

o Rotate the door 180˚ (upside down).

INSTRUCTION MANUAL
o Screw the 4 screws of the upper hinge and bottom hinge tightly to x the
door in place.
For Built Under Series (Control in Cabinet)
Remarks:
• To reverse the door from right hinge to left hinge, you need to get ready 2 new spare
parts: an Upper Left Hinge, and a Bottom Left Hinge.
• All removed parts is suggested to be saved in case of door re-reversal.
1.Open the door, and loosen the 2 screws from Pvot Hnge of the Bottom Rght Hnge.
60o Min.
Bottom Right Hinge
Screw
Pivot Hinge
2.Carefully remove the door from the Upper Rght Hnge and prevent t from scratchng. Take out
the Pvot Hnge from the door hnge hole.

60o Min. Pivot Hinge
Bottom Right Hinge
Door
Upper Right Hinge
3.Unscrew the Upper Rght Hnge and Bottom Rght Hnge from the cabnet. Keep them well for
door re-nstallaton. Upper Right Hinge
Bottom Right Hinge
4.Pull out the 6 Plastc Caps at the front left corner of the cabnet. And move them all to the
rght sde.
Plastic Caps (6pcs)
5.Install the Upper Left Hnge and Bottom Left Hnge to the left sde of the cabnet. Make sure
the screws are tghtened.

INSTRUCTION MANUAL
Upper Left Hinge
Bottom Left Hinge
6.Move the Hnge Hole Cap (at the top of the door) from the left sde to the rght sde.
Hinge Hole Cap
7.Remove the Handle Hole Cap (2pcs) on the rght sde of Door by pryng t out gently wth small
at screwdrver.
Handle Hole Cap

8.Gently pull the door gasket to one sde to reveal the Handle Screws (2pcs) on the left sde of
the Door.Unscrew t wth a cross screwdrver and Remove the Handle (Leave the Washers as
where t s).
Handle Screw
Washer
Handle
9.Install the Handle to the rght sde of the door by screwng tghtly the Handle Screws (2PCS).
Handle
Washer
Handle Screw

INSTRUCTION MANUAL
10.Push the Handle Hole Cap (2pcs) nto the Handle Holes on the left sde of the Door.
Handle Hole Cap
11.Insert the Pvot Hnge nto the bottom hnge hole of the door.
Pivot Hinge
12.Install the door to the left hnge sde by tghtenng the Pvot Hnge wth the 2 screws.
Pivot Hinge
Screws (2pcs)
Bottom Left Hinge

CPRO1800SRB / CPR01800SX
IMPORTANT İNFORMATİON
We recommend that you secure the racks in place using adhesive tape to prevent causing damage when
handling the appliance and store all removed parts carefully.
1. Remove the Hole Cover and Upper Hnge Cover on top sde usng a at-head screwdrver.
Remove the Upper Hnge by unscrewng the Hex Head Srews (4pcs). Now carefully lft the Door
o the Bottom Hnge wth your assstant and gently set t asde. It s mportant to keep the
Hnge Washer on the top of Bottom Hnge for re-nstallaton.
Hole Cover
Upper Hinge Cover
Hex Head Screw (4pcs)
Upper Hinge
Door
2.Move the Hnge Hole Cap (at the top of the door) from the left sde to the rght sde. Move the
Pvot Hnge (at the bottom of the door) from the rght to the left sde.
Pivot Hinge
Hinge Hole Cap

INSTRUCTION MANUAL
3.Remove the Bottom Hnge Cover by pryng t o gently wth small at screwdrver. Remove the
Bottom Hnge by unscrewng the Hex Head Screw (4pcs). Unscrew the Pan Head Screw (4pcs)
from bottom left sde. Now move the Bottom Hnge to the bottom left sde and screw t tghtly
wth the Hex Head Screws (4pcs). Move the Pan Head Screw (4pcs) to the bottom rght sde and
screw t.
Bottom
Hnge Cover Bottom
Hnge Cover
Hex Head
Screw(4pcs)
Hex Head
Screw(4pcs)
Pan Head
Screw(4pcs)
Bottom
Hnge
Hnge
Washer
Hnge Washer
Bottom
Hnge
Pan Head
Screw(4pcs)
4.Hold the Door carefully wth your assstant and place t on the top of Bottom Hnge , make sure
the Pvot Hnge s at correct place through the Hnge Washer. Insert the pn of the Upper Hnge
nto the Bushng on the top rght and fx t wth Hex Head Screw (4pcs). Cover the Upper Hnge
and Bottom Hnge wth Upper Hnge Cover and Bottom Hnge Cover. Cover hnge screw holes
on the top rght wth the Hole Cover.
Hex Head
Screw(4pcs)
Upper Hnge
Bushng
Door
Hnge Washer
Bottom Hnge
Upper
Hnge Cover
Upper Hnge
Hole Cover
Bottom
Hnge Cover

5.Remove the Handle Hole Cap (2pcs) on the rght sde of Door by pryng t out gently wth small
at screwdrver.
Handle Hole Cap
6.Gently pull the door gasket to one sde to reveal the Handle Screws (2pcs) on the left sde of
the Door.Unscrew t wth a cross screwdrver and Remove the Handle (Leave the Washers as
where t s).
Handle Screw
Washer
Handle

INSTRUCTION MANUAL
7Install the Handle to the rght sde of the door by screwng tghtly the Handle Screws (2PCS).
Handle
Washer
Handle Screw
8.Push the Handle Hole Cap (2pcs) nto the Handle Holes on the left sde of the Door.
Handle Hole Cap

INSTRUCTION MANUAL
1. Locate the plinth (packaged inside the appliance)
2. Remove the four screws from (two on each side of) the plinth section, but take care
to support both sections to prevent the adjustable section from falling away. Remove
the adjustable front section and place this somewhere safe.
3. With the help of another individual, make sure the wine cooler is secure and tilt it
backwards to gain full access to the area below the door. Make sure that the door is
kept closed at all times during this process in order to avoid damage to the door and
appliance.
4. If present, remove the two screws shown by arrows and marked as 'A:. in Fig. 14.
Then, locate the four black tting screws. These are packaged inside the appliance
with the door reversing hinge.
5. If present, remove the screws shown by arrows and marked as 'B' in Fig. 15. These
are not needed.
6. Offer up the plinth, ensuring it is the same way up as per Fig. 16. Then, using a
(magnetic tipped) screwdriver, insert two of the black tting screws through the oval
access holes (shown in Fig. 16) and tighten them.
7. Install a (black tting) screw into each of the two lower holes (shown in Fig. 16). This
will help to secure the plinth to the underside of the wine cooler. (Steps continued on
page 21)
8. Adjust the wine cooler feet so that you achieve the desired height for the cooler.
If needed, re-attach the extendable plinth section with the four screws that were
removed in step 2. Stand the wine cooler up steadily- if the extendable section will
foul the oor or similar, remove it. Allow the wine cooler to stand for 24 hours before
plugging it in. This will help to prevent damage to the system.
INSTALL REMOVABLE FRONT GRILLE
Included models OX15SRB, OX30DRB, OX30DRW, OX30DX, OX60DRB, OX60DRW,
OX60DX
Follow these steps to do so:
The plinth/grille for this appliance comes packaged inside and can be tted if desired

INSTRUCTION MANUAL

Adjusting the plint for OX15SRB
The plinth/grille for this appliance comes with an adjustable section. The process
for adjusting the plinth trim is simple and is achieved by following the steps
below. Perform these steps once the appliance is standing on all four feet and do
not put weight on the plinth.
1. Loosen the two screws on each side of the plinth trim (four altogether - Fig. 17).
2. Carefully guide the front trim down until the desired height is achieved. Tighten
the screws.
DOWNLOAD OTHER LANGUAGE USER MANUAL
You can nd Norwegian, Swedish, Finnish and Danish user manual from below website.
1. You can download Norwegian user manual at https://temptech.no/manualer-og-
installasjon/
2. You can download Swedish user manual at https://temptech.se/manualar-och-
installation
3. You can download Finnish user manua at https://temptech.fi/kayttoohjeet-ja-
asennus/
4. You can download Danish user manual at https://temptech.dk/brugervejledning-
og-installation/
We take reservations about typing faults and if any problems occure, please contact
us at service@temptech.no.
END
… 52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Temptech OSLO SERIES bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Temptech OSLO SERIES in de taal/talen: Engels als bijlage per email.

De handleiding is 11.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info