649682
66
Verklein
Vergroot
Pagina terug
1/164
Pagina verder
- 66 -
CHANGE BATTERY Procedure
SUPPLIED VEHICLE
BATTERY BATTERY
REMOVAL CHANGE
- Press the “FUNCTION” button ( g. A.22) to select
the SUPPLY function ( g. A.12);
- if necessary or requested by the vehicle
manufacturer speci cations, customise the
voltage and/or current values as indicated above;
- press the “VOLT” button ( g. A.21) to select the
battery voltage ( g. A.1);
- connect the clamps to the relative vehicle battery
terminals;
- change the battery paying particular attention
not to disconnect the clamps from the vehicle
terminals so as not to lose the electronic settings.
3.7 START - STARTER AID (if foreseen)
START mode ( g. A.15), if foreseen, is available
for 12V batteries and supplies 70 A current as a
starter aid. If the battery is completely run down,
it is advisable to perform a precharge cycle before
proceeding.
FUNCTION SELECTION
3"
DISPLAY
3.7.1 Procedure
- Press and hold the “MODE” button ( g. A.23) for 3
seconds to select the “START” function;
- connect the vehicle battery terminal clamps (the
ashing message “Go” appears on the display ( g.
A.1);
- now start the vehicle; a 30 second timer will
engage and will appear on the display ( g. A.1),
at the end of which it will be possible to start the
engine again;
- on completing the selected process, disconnect
the power cable from the mains socket and
disconnect the clamps from the battery terminals.
FUNCTION EXIT
3.8 ALARMS
The alarms are displayed by a graph symbol ( g. A
.3) when there is a pole inversion, short circuit, low
or faulty battery.
The alarms will appear on the display ( g. A.2) and
have the following meanings:
AL1: Pole inversion and short circuit;
AL2: Battery voltage incompatible with operator’s
choice;
AL3: PULSE TRONIC charge: start of maximum
time Desulfation Phase 2 - battery not recoverable;
AL4: PULSE TRONIC charge: start of maximum
time Analyse Phase 3 - battery not recoverable;
AL5: PULSE TRONIC charge: start of maximum
time Main Charge Phase 4 - battery not recoverable;
AL6: PULSE TRONIC charge: start of maximum
time Verify Phase 6 - battery not recoverable;
AL7: PULSE TRONIC charge: start of maximum
time LCC - battery not recoverable;
AL8: PULSE TRONIC charge: start of maximum
time Pulse Tronic Phase 8 - battery not recoverable;
AL9: Short circuit in Supply / Diagnostic /
Equalization functions;
INFO ALARM
SHORT CIRCUIT
POLARITY REVERSAL
66

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Telwin DOCTOR CHARGE 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Telwin DOCTOR CHARGE 50 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info