649682
63
Verklein
Vergroot
Pagina terug
1/164
Pagina verder
- 63 -
this function ( g. A.10);
- press the “VOLT” button ( g. A.21) to select the
battery voltage ( g. A.1);
- connect the clamps to the battery terminals;
- the process starts automatically, with a variable
duration depending on the battery response,
displayed in graph format. If the desulfation
process is completed successfully the word “End”
will appear on the display ( g. A.2). In the case
of highly sulphated batteries, hence irrecoverable,
this process may not be completed; this condition
is indicated when the charge phase continues
to restart and the opening/closing of a relay is
audible.
END OF PROCESS - EXAMPLE
BEEEP
Info
Alarm
3.5.2 EQUALIZATION
This process is recommended for routine battery
maintenance, to be performed periodically according
to use.
FUNCTION SELECTION
DISPLAY
ATTENTION! Pay special attention to the
typeofbatterybeingequalized(WET,GEL,AGM,
PbCa):checkthemaximumallowedvoltageto
avoiddamagingthesame.
Customising the VOLTAGE
To customise the equalization voltage value
simultaneously press and hold the “VOLT” ( g. A.21)
and “FUNCTION” ( g. A.22) buttons for 3 seconds,
then use the same buttons to select (decrease
using the “VOLT” button and increase using the
FUNCTION button), the desired voltage value
between 6V÷7.5V, 12V÷15V, 24V÷30V respectively
for 6V, 12V, 24V batteries.
The factory default voltage value is respectively
6.8V, 13.6V, 27.2V.
The set voltage mode will be exited automatically
after a 3” time-out.
VOLTAGE ADJUSTMENT - EXAMPLE
3"
BEEEP
DISPLAY
13.3V
13.2V
13.1V
. . . . .
. . . . .
13.7V
13.6V
13.5V
Procedure
- press the “FUNCTION” button ( g. A.22) to select
this function ( g. A.9);
- press the “VOLT” button ( g. A.21) to select the
battery voltage ( g. A.1);
- connect the clamps to the battery terminals;
- the equalization process will run automatically
indicating the voltage value on the display ( g.
A.2), along with the current ( g. A.4) output.
On completing the process, the word “End” will
appear on the display ( g. A.2).
END OF PROCESS - EXAMPLE
BEEEP
Info
Alarm
3.6 POWER SUPPLY
The device foresees 2 operating modes
(ADVANCED PROGRAMS) as a generator
stabilised at 6/12/24V:
- DIAGNOSTIC ( g. A.13);
- SUPPLY ( g. A.12).
ADVANCED MENU SELECTION
3"
BEEEP
MENU
ADVANCED
PROGRAMS
On completing the selected process, disconnect the
power cable from the mains socket and disconnect
the clamps from the battery terminals.
63

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Telwin DOCTOR CHARGE 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Telwin DOCTOR CHARGE 50 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info