649682
60
Verklein
Vergroot
Pagina terug
1/164
Pagina verder
- 60 -
c) CUSTOMISED PULSE-TRONIC
It is possible to select:
- the battery construction technology ( g. A.11)
choosing between:
“WET, GEL, AGM, PbCa”
- the charge current ( g.A.6) choosing between:
“AUTO” - automatic setting according to battery
conditions;
“BOOST” - rapid charge;
- the Ah - customised setting of the battery Ah ( g.
A.2) using 6 prede ned values selected using
the “MODE” button ( g. A.23), adjustable at 5 Ah
intervals using the “VOLT” button ( g. A.21), and
“FUNCTION” ( g. A.22).
Ah SETTING - EXAMPLE
15Ah 100Ah 300Ah
15Ah 100Ah 300Ah
DISPLAY
80Ah
75Ah
70Ah
. . . . .
. . . . .
100Ah
95Ah
90Ah
Note. The  nal charge voltage depends on the
technology of construction of the battery; to avoid
damaging the battery, pay special attention to the
technical speci cations given by the manufacturer.
Construction
Technology
Final charge voltage
6V 12V 24V
WET 7.7V 15.4V 30.8V
GEL 7.2V 14.4V 28.8V
AGM 7.35V 14.7V 29.4V
PbCa 8V 16V 32V
AUTO 7.2V 14.4V 28.8V
AUTO
7.7V 15.4V 30.8V
The PULSE TRONIC charge process ( g. A.17)
starts when the display stops ashing, each
individual phase is identi ed on the display ( g.
A.14) and terminates with the message ( g. A.2)
“OK”. The battery charge status is displayed
graphically in ( g. A.5). If the charge process is
not successful, an alarm message appears on
the display ( g. A.2) (see alarms list). When the
battery is charged, the battery charger switches
automatically to maintenance mode.
END OF CHARGE - EXAMPLE
CHARGE COMBINATION CHART
BATTERY TYPE
(T)
BATTERY CURRENT
(C)
AUTO
AUTO
AUTO BOOST
MANUAL “Ah”
AUTO
AUTO
AUTO BOOST
MANUAL “Ah”
WET
GEL
AGM
PbCa
AUTO
AUTO BOOST
MANUAL “Ah”
3.3.2 STORING OPERATION SETTINGS
It is possible to store the last function modes, so
they are immediately available after any switching
ON/OFF.
3.3.2.1 STORING PULSE-TRONIC CHARGE
Storage of voltage and type of battery, charge
mode.
Procedure:
- Check that the charge clamps are not connected
to a battery;
- Connect the power cable to the mains socket;
- Set the desired charge mode;
- Disconnect the power cable from the mains
socket.
3.3.2.2 STORING SUPPLY/DIAGNOSTIC
MODE
Storage of delivered voltage and current.
Procedure:
- Set the chosen mode and adjust the voltage/
current values as required;
- Turn on the lock settings by pressing, at the same
time, both keys “VOLT” ( g.A.21) and “MODE”
( g.A.23) for 3 seconds, on the display ( g.A.2)
( g.A. 4) will appear “LOK on.”
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Telwin DOCTOR CHARGE 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Telwin DOCTOR CHARGE 50 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info