property. You have to be familiar with the safety requirements before starting to use the
Device requires power supply source that satisfies all safety
requirements listed in LST EN 60950-1 standard. Each power supply
source should not exceed 15VA.
Socket RJ45 is used for device firmware upgrade. Only
qualified personnel with proper equipment can upgrade the device.
Do not mount or serve device during a thunderbolt.
To disconnect power for the device please do the following:
• Plug off AC/DC power adapter from the wall outlet.
• Turn off using power on/off button.
To avoid mechanical damage of the device it is recommended to transport the
device packed in damage-proof pack. Protection against over currents, short circuits and
earth faults should be provided as a part of the building installation. Additional two pole
protective device is required to protect from short-circuit and earth false. The power of
connected device should satisfy power of release device. The creepage distance between
contacts should be no less than 3mm. While using the device, it should be placed so, that it
would be possible to plug off AC/DC power adapter from the wall outlet.
Signal level of the device depends on the environment in which it is working. If the
device starts working insufficiently only qualified personnel may repair this product. We
recommend to send it to repair centre or to manufacturers. There are no exchangeable
parts inside of the device.
20
