519065
16
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
16
Normal Display
The display is always on when batteries are installed, normally displaying the active Mode of the
remote e.g. DVD, the day of week e.g. Mon, and time of day e.g. 23:58, in 24 hour format.
Mode Keypress Display
Pressing a Mode key changes remote operation to that Mode and displays the active Mode and
its code e.g. DVD and the programmed 4-digit code e.g. 0768. Display returns to Normal display
on Mode key release.
Setup (Shift) Keypress Display
Pressing and releasing the Setup key displays the active Mode of the remote e.g. DVD, the Date
e.g. 9:10 (Day: Month) and indicates “Shift” operation with “(S)”. Press and release Exit to return
to normal display.
Shift Function
Some keys of the universal remote control can be allocated twice. To use these functions press
and release the Setup key (S is displayed on the LCD screen) followed by the desired secondary
function key. If no key is pressed after the Shift key the remote will time-out to normal
(non-shifted) operation after 15-20 seconds.
IR Transmission
Once a key has been pressed (and not released) the remote is programmed to cease
IR transmissions after 255 IR message transmissions (approximately 30 seconds depending on
actual code programmed). This is to prevent battery drain should a key become “stuck” inadvertently
e.g. the remote may become trapped down the side of a chair with a key depressed.
Keypress Indication
Keypresses are indicated by either a “transmit” symbol in the LCD display or by a change of
screen display.
Power-On Default
The remote will always power-on in TV Mode on battery insertion.
TV Mode
Only a TV code can be programmed under the TV mode key.
Setup Screen Navigation
To entry the Setup Menu, press and hold the Setup key until “CODE SETUP” appears in the
display. The “SET” symbol will always be shown when the remote is in Setup. Successive presses
of the Setup key will present available Setup options:
CODE SETUP > SYSTEM SETUP > TIMER SETUP > LERNEN SETUP > MACRO SETUP > SETUP VERL.
Press OK to select the desired programming step required.
Use the Setup, Okay, Up, Down, Left and Right arrow keys for Setup screen navigation and
selection. To exit Setup routines and return to normal operation, press the Exit key or navigate to
the “EXIT SETUP” screen and press Okay. Completion of some Setup routines will automatically
return the remote to normal operation.
Exit from setup
Exit from Setup will also occur automatically after approximately
Timeout
15 seconds if no key is pressed. “Timeout” will be displayed.
When the remote is busy processing in Setup routines,
Warten...Set
“Warten” will be displayed.
1
CODE SETUP – press OK here to program a Mode e.g.
Code Entry, Search, etc. See Code Setup options below.
CODE- SET
SETUP
2
SYSTEM SETUP – press OK here to set Time, Date,
Volume Control, etc.
SYSTEM- SET
SETUP
3 TIMER SETUP – press OK here to set Timer events.
TIMER- SET
SETUP
4
LEARN SETUP – press OK here to program a Mode
with Learned commands.
LERNEN- SET
SETUP
5 MACRO SETUP – This function is not available.
MACRO- SET
SETUP
6
EXIT SETUP – press OK here to Exit Setup routines
and return to normal operation.
SETUP- SET
VERL.
55415 BedienAnltg TeFu_Zweite Version 25.01.10 11:17 Seite 16
16

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Telefunken-TRC-850---8in1

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Telefunken TRC 850 - 8in1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Telefunken TRC 850 - 8in1 in de taal/talen: Duits als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 Gebruiksaanwijzing - English - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info