486538

Telefunken TLD 3703 Handleiding

20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
By Ian Aikman at 5:27 pm, Mar 09, 2006
2
Before using this product, read and follow all warnings and instructions.
This product is not intended for use by young children or infirm persons unless they are adequately
supervised by a responsible person to ensure that they use this product safely.
Young children should be supervised to ensure that they do not play with this product.
This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock
or personal injury.
This product is intended for household use only and not for commercial or industrial use.
Always power this product from an outlet with the same rating (voltage and frequency) as indicated
on the rating label in the back of the product.
If this product has been damaged (including cord or plug) take it to an accredited service
technician for inspection, and if necessary, repair.
Turn off and disconnect the power cable before cleaning or storing this product.
Ensure this product does not get wet or splashed.
Only use the A/C power adapter supplied with your product, or a replacement recommended by a
qualified technician.
Do not place naked flames, such as lighted candles, on the unit.
Do not place objects filled with liquids, such as vases on the unit.
Do not install this product on top of other electrical equipment, on uneven surfaces
Do not use or store this product in a place where it is subject to direct sun, heat, excessive dust or
vibration.
Do not use this product with wet hands.
Do not clean this product with water or other liquids.
Do not block or cover these slots and holes in the cabinet.
Do not push foreign objects into cabinet slots or holes.
The screen surface is easily scratched. Do not touch the screen with hands or any hard object.
Do not pull the power cord when disconnecting power. Turn off the switch on the socket and pull
the plug not the cord.
Do not attempt to open this product yourself. There are no user serviceable parts inside.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of insinuated
dangerous voltage within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
The exclamation point within an equilateral triangles is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance
Check the accessories
Notes:
3
4
Safety precaution................................................................ 2
Basic operation................................................................... 2
Notes................................................................................. 3
Contents.............................................................................. 4
LCD TV panel.................................................................... 5
LCD TV panel(continue)..................................................... 6
Remote control.................................................................... 7
Remote control.................................................................... 8
Connecting to antenna or TV radio network............................. 9
Picture........................................................... .................... 10
Sound............................................................................... 13
PIP................................................................................... 15
Function........................................................................... 17
TV channel........................................................................ 20
Connecting to devices.................................................. 24other
Trouble shooting................................................................ 25
Warranty........................................................................... 26
CH +
-VOL +-
SOURCE
MENU
e
b
a
e
d
c
CH+
CH-
VOL+
VOL-
SOURCE
MENU
5
b
a
d
c
d) Channel selection
c) Volume adjusting
a) Selecting exterior signal input
b) Main menu display and confirm
e) On/off button
e
b
a
d
c
a)
Power On/Off
b)HDMI
High definition multi media interface
c)VGA
Input terminal of simulation signal of PC
d)PC Audio
Sound input terminal of RGB input
e)
Color difference component input terminal and AV2 input terminal and audio input terminal
f)
Color difference component input terminal and AV1 input terminal and audio input terminal
g)S-Video
Color and brightness separation input terminal
h)SCART IN
SCART input terminal ,suit for European export machine.
i)VHF/UHF
Antenna/close circuit TV network port(75 Ohm VHF/UHF)
j)POWER
AC power input terminal
Power On/Off
and HDMI Audio
and HDMI
Av2 L/R2, YPbPr2
Av1 L/R1 YPbPr1
b
c
d
g
h
i
j
6
e
f
7
Application instruction of remote control
Power (POWER):
Signal (AV/TV)
Mute (MUTE):
Sleep (SLEEP):
(NICAM/A2):
Still (STILL):
16: 9:
Noise reduction (NR.):
Surround (SORROUND):
Picture (PICTURE):
Sound (SOUND):
Display (DISPLAY):
0,1~9:
-/--:
:
Volume (VOL) / :
Channel(CH) / :
(MENU):
Size (SIZE):
Position (POSITION):
Window (WINDOW):
Swap (SWAP):
On/Off (ON/OFF):
Power on/off button; press once to turn the TV on and press again to turn
the TV off.
Signal source selection button, which allows the customer to select the
signal source input.
Mute button, press once to disable the speaker and press again to enable the
speaker.
Scheduled power off time button, which allows the customer to set the TV
power off time according to
NICAM/A2 NICAM button of TV, which allows the customer select the different
sound systems (Australia ONLY uses A2 sound).
Still button of TV menu, the TV picture will be frozen after pressing, press again
to release.
Picture size swap button, which allows the customer to swap the picture between
different sizes (16:9 4:3 zoom1 and 2).
Picture noise reduction button, which allows the customer to select
different 3D noise reduction mode.
Surround button. Which allows the customer to select surround
sound function.
Picture mode button of TV, which allows customer to select different
picture modes.
Sound mode button of TV, which allows customer to select different sound
modes.
Message display button of TV, which allows the customer to view the
channel, input status of TV.
TV channel selection button, which allows the customer to select the channel one to
nine.
TV channel selection button, which allows the customer to select TV channels ten
Channel revert button of TV, which allows the customer to watch the last TV channel.
Volume up and down button, which allows the customer to increase or
decrease the volume.
Channel up and down button, which allows the customer to increase or
decrease the channel.
OSD menu button, which allows the customer to enter the TV setup menu.
PIP size selection button, which allows the customer to select different PIP size
PIP position selection button, which draws a border around the
secondary window.
Focus window button, which draws a border around the secondary
window.
Main window and sub-window swap button, which allows the customer to
swap between main window and sub-window.
PIP on/off button, which allows the customer to turn on/off the PIP function
of TV.
:
the preset times displayed.
to
one hundred
programs
8
In order to receive TV program, signal should be received from
one of the following signal sources:
Outdoor antenna.
1.In these three cases, the input cable of antenna or TV
network should be plugged in the 75 Ohm coaxial cable jack
at the rear side of LCD TV.
2.
When installing LCD TV , 75 Ohm coaxial Cable must
be used. If other coaxial cable is used, there may be noise and
image disturbances.
Cable TV network.
Satellite broadcast network
Indoor antenna is NOT recomended for this TV
quality
In order to receive digital TV programs, a Digital TV STB
MUST be connected to the rear of the LCD TV.
Connect the coaxial cable connector to
For further instruction refer to the receiver instruction manual
The output terminal.
The antenna input terminal.
Connecting digital TV Set Top Box
Connecting to antenna or TV radio network
The of LCD TVmust be used
Video
Audio
LR
CableTVnetwork
Or
TherearofLCDTV
9
DigitalTVreceiver
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH / button to
select the Picture menu.
2.Press the VOL button on the remote control to enter
the Picture menu, then press CH /CH button
to select Picture mode and press VOL /
button to select the picture mode such as standard, soft,
vivid and user.
Press the MENU button on the remote control to
return to upper menu.
3.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button
to select the Picture menu .
2.press the VOL button on the remote control to enter
the Picture menu, then press CH /CH
button to select brightness
3.Press the VOL / button on the remote control
button to enter brightness adjustment menu to adjust
Brightness
4.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to enter
the OSD menu, then press CH /CH button to
select the Picture menu.
2.Press the VOL button on the remote control to enter
the Picture menu, then press CH /CH button
to select Contrast
3.Press the VOL / button on the remote control
button to enter Contrast adjustment menu to adjus
Contrast
4.Press the MENU button on the remote control to
return to upper menu.
Exit
Move
Exit
Move
Exit
Exit
Exit
10
Move
1.Press the MENU button on the remote control to enter
the OSD menu, then press CH /CH button to
select Picture menu.
2.Press the VOL button on the remote control to enter
the Picture menu, then press CH /CH button
to select Saturation
3.Press the VOL / button on the remote control
button to enter Saturation adjustment menu to adjust
Saturation
4.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button
to select the Picture menu.
2.Press the VOL button on the remote control to enter
the Picture menu, then press CH /CH button
to select Sharpness
3.Press the VOL / button on the remote control
button to enter Sharpness adjustment menu to adjust
Sharpness
4.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button
to select the Picture menu.
2.Press the VOL button on the remote control to
enter the Picture menu, then press CH /CH
button to select Hue
Exit
Exit
Exit
Exit
Exit
11
Move
Move
Move
3.Press the VOL / button on the remote control
button to enter Hue adjustment menu to adjust Hue
4.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button to
select the Picture menu.
2.Press the VOL button on the remote control to enter
the Picture menu, then press CH /CH button
to select Color Temp. and press VOL / button
to select color temperature mode(cool, warm, normal
and user).
3.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to enter
the OSD menu, then press CH /CH button to
select the Picture menu.
2.Press the VOL button on the remote control to enter
the Picture menu, then press CH /CH button to
select Scale press VOL / button to select
display mode such as (16:9, 4:3, ZOOM1, ZOOM2).
3.Press the MENU button on the remote control to
return to upper menu.
Exit
Exit
Exit
12
Move
Move
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button to
select The Sound menu.
2.Press the VOL button on the remote control to enter
the Sound menu, then press CH /CH button to
select Sound Mode and press VOL / button to
select sound mode such as standard, news, movie and
user.
4.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button to
select The Sound menu.
2.Press the VOL button on the remote control to
enter the Sound menu, then press CH /CH
button to select Volume
3.Press the VOL / button on the remote control
button to enter Volume adjustment menu to adjust
Volume
4.Press the MENU button on the remote control to
return to upper menu.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button to
select the Sound menu.
2.Press the VOL button on the remote control to
enter the Sound menu, then press CH /CH
button to select Bass .
3.Press the VOL / button on the remote control
button to enter Bass adjustment menu to adjust Bass
4.Press the MENU button on the remote control to
return to upper menu.
Exit
Exit
Exit
Exit
Exit
13
Move
Move
Move
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
The “Sound” menu.
2.Press the “VOL ” button on the remote control to enter
the “Sound” menu, then press “CH /CH ” button to
select “Balance”
3.Press the “VOL / ” button on the remote control button
to enter Balance adjustment menu to adjust “Balance”.
4.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “Sound” menu.
2.Press the “VOL ” button on the remote control to enter
the “Sound” menu, then press “CH /CH ” button to
select “Treble”.
3.Press the “VOL / ” button on the remote control button
to enter Treble adjustment menu to adjust “Treble”.
4.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “Sound” menu.
2.Press the “VOL ” button on the remote control to enter
the “Sound” menu, then press “CH /CH ” button to
select “Surround” and press “VOL / ” button to select
surround on/off.
3.Press the “MENU” button on the remote control to return
to upper menu.
Exit
Exit
Exit
Exit
Exit
14
Move
Move
Move
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“Window” and press “VOL / ” button to select the main
window and sub-window in the window.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“Main Source” and press “VOL / ” button to select the
signal input terminal of main window.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, the press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“ Size” and press “VOL / ” button to adjust the
size of the sub-window.
3.Press the “MENU” button on the remote control to return
to upper menu.
PIP
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“PIP Source” and press “VOL / ” button to select the
signal input terminal of main window.
3.Press the “MENU” button on the remote control to return
to upper menu.
Exit
Exit
Exit
Exit
15
Move
Move
Move
Move
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ”button to select
the “PIP” menu.
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press“CH /CH ” button to select
“PIP position” and press “VOL / ” button to adjust the
position of the sub-window.
3.Press the “MENU” button on the remote control to return
to upper menu
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH” button to Select
the “PIP” menu.
3.Press the “MENU” button on the remote control to return
to upper menu
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button button to
select “PIP Mode” and press “VOL / ” button to select
pip mode such as pip, pop, 9WIN and OFF.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ”button to select
the“PIP” menu
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“PIP Swap” and press “VOL / ” button to swap picture
between main window and sub-window.
3.Press the “MENU” button on the remote control to return
to upper menu
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PIP” menu
‹
2.Press the “VOL ” button on the remote control to enter
the “PIP” menu, then press “CH /CH ” button to select
“3D NR” and press “VOL / ” button to select 3D NR
function such as high, mid,low and off
3.Press the “MENU” button on the remote control to return
to upper menu
Exit
Exit
Exit
Exit
16
Move
Move
Move
Move
17
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “Function” menu.
2.Press the “VOL ” button on the remote control to enter
the “Function” menu, then press “CH /CH ”button to
select “Language” and press “VOL / ” button to select
the desired language.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “Function” menu.
2.Press the “VOL ” button on the remote control to enter
the “Function” menu, then press “CH /CH ”button to
select “OSD H Position” and press “VOL / ” button to
adjust the horizontal position of OSD.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “Function” menu.
2.Press the “VOL ” button on the remote control to enter
the “Function” menu, then press “Ch /CH ”button to
select OSD Duration ”.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “Function” menu.
”button to
select “OSD V Position” and press “VOL / ” button to
adjust the vertical position of OSD.
3.Press the “MENU” button on the remote control to return
to upper menu.
2.Press the “VOL ” button on the remote control to enter
the “Function” menu, then press “CH /CH
Function
Exit
Exit
Exit
Exit
Move
Move
Move
Move
3.Press the VOL / button on the remote control
button to enter OSD Duration adjustment menu to adjust
OSD Duration .
Press the MENU button on the remote control to return
to upper menu
4.
1.Press the MENU button on the remote control to enter
the OSD menu, then press “CH /CH button to select
The Function menu.
2.Press the VOL button on the remote control to enter
the Function menu, then press “CH /CH button
to select OSD Halftone
3.Press the VOL / button on the remote control
button to enter OSD Halftone adjustment menu to adjust
OSD Halftone
Press the MENU button on the remote control to return
to upper menu.
1.Press the MENU button on the remote control to enter
the OSD menu, then press CH /CH button to
select the Function menu.
2.Press the VOL button on the remote control to enter
the Function menu, then press CH /CH button
to select Blue Back and press VOL / button to
select blue back on/off function.
Press the MENU button on the remote control to return
to upper menu.
1.Press the MENU button on the remote control to
enter the OSD menu, then press CH /CH button to
select the Function menu .
2.Press the VOL button on the remote control to enter
the Function menu, then press CH /CH button
to select Timer
Exit
Exit
Exit
Exit
Exit
Function
18
Move
Move
Move
19
3.Press the “VOL / ” button on the remote control button
to enter Timer setting menu, then press “CH / Ch ”
button to select different items, and press “VOL / ”
button to adjust Current, Off Time, On time and On
Channel.
4.Press the “MENU” button on the remote control to return
1. Press the “MENU” button on the remote control to enter
the OSD menu, then press
“CH / CH ” button to select The “Function” menu.
2.Press the “ VOL ” button on the remote control to enter
the “Function” menu, then press “Ch Ch ” button to
select “Reset” and press “VOL / ” button to reset
factory default.
3.Press the “MENU” button on the remote control to return
to upper menu.
Exit
Exit
Move
Move
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
The “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV ” menu, then press “CH /CH ” button to select
“Auto Tune”.
3.Press the “VOL / ” button on the remote control button
to enter Auto Tune adjustment menu to adjust “Auto
Tune”.
4.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
The “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV ” menu, then press “CH /CH ” button to select
“Manual Tune”.
3.Press the “VOL / ” button on the remote control button
to enter Manual Tune adjustment menu to adjust “Manual
Tune”.
4.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
The “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV ” menu, then press “CH /CH ” button to select
“Fine Tune”.
Exit
Exit
Exit
Exit
Search
Store
0
Exit
Move
20
Move
Move
Move
21
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
The “TV” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV” menu, then press “CH /CH ” button to select
“Channel Swap”.
3.Press the “VOL / ” button on the remote control button
to enter Channel Swap adjustment menu to adjust
“Channel Swap”.
4.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV ” menu, then press “CH /CH ” button to select
“Skip” and press “VOL / ” button to select on/off.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV ” menu, then press “CH /CH ” button to select
“Color system” and press “VOL / ” button to select
proper color system mode.
3.Press the “MENU” button on the remote control to return
to upper menu.
Store
Exit
Move
Exit
Exit
Exit
Channel swap
2
Swap
Exit
Move
2
3.Press the “VOL / ” button on the remote control button
to enter Fine Tune adjustment menu to adjust “Fine
Tune”.
4.Press the “MENU” button on the remote control to return
to upper menu.
Move
Move
Move
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV” menu, then press “CH /CH ” button to select
“Sound system” and press “VOL / ” button to select
proper sound system mode.
3.Press the “MENU” button on the remote control to return
to upper menu.
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “TV ” menu.
2.Press the “VOL ” button on the remote control to enter
the “TV ” menu, then press “CH /CH ” button to select
and press “VOL / ” button to adjust
NICAM.
3.Press the “MENU” button on the remote control to return
to upper menu.
“NICAM” Select
Exit
Exit
22
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PC ” menu.
2.Press the “VOL ” button on the remote control to enter
the “PC ” menu, then press “CH /CH ” button to select
“ ” and press “VOL / ” button to adjust
3.Press the “MENU” button on the remote control to return
to upper menu.
“”
H Position Select
H Position
Exit
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PC ” menu.
2.Press the “VOL ” button on the remote control to enter
the “PC ” menu, then press “CH /CH ” button to select
“V ” and press “VOL / ” button to adjust
3.Press the “MENU” button on the remote control to return
to upper menu.
“V ”
Position Select
Position
Exit
Move
Move
Move
Move
PC
Press “TV/AV” key to enter the signal source menu.
Press “CH /CH ” key to select signal source.
Press “ ” key to exit signal source menu.
Press VOL “ / ” key to sure.
TV/AV
23
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PC ” menu.
2.Press the “VOL ” button on the remote control to enter
the “PC ” menu, then press “CH /CH ” button to select
“ and press “VOL / ” button to adjust
3.Press the “MENU” button on the remote control to return
to upper menu.
“
Clock Select
Clock”
”
Exit
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PC ” menu.
2.Press the “VOL ” button on the remote control to enter
the “PC ” menu, then press “CH /CH ” button to select
“ ” and press “VOL / ” button to adjust
3.Press the “MENU” button on the remote control to return
to upper menu.
“”
Phase Select
Phase
1.Press the “MENU” button on the remote control to enter
the OSD menu, then press “CH /CH ” button to select
the “PC ” menu.
2.Press the “VOL ” button on the remote control to enter
the “PC ” menu, then press “CH /CH ” button to select
“ and press “VOL / ” button to adjust
3.Press the “MENU” button on the remote control to return
to upper menu.
“
Auto Select
Auto”
”
Exit
Exit
Move
Move
Move
24
Y2
Pb2
Pr2
RCA terminal is used to connect the output device of DVD (480I/480p/576I/576p/720P/1080I)
Notes:
1.Y-Pb-Pr1 /Av1/ S-Video use a common Audio in.
2.Y-Pb-Pr2 / Av2 use a common Audio in.
3.Y-Pb-Pr of DVD is corresponding to Y-Pb-Pr of LCD TV.
R2
L2
Av2
Y1
Pb1
Pr1 R1
L1
Av1
Y2
Pb2
Pr2 R2
L2
Av2
4.Scart to Scart from a VCR
5.DVI to HDMI and using the PC audio
6.PC to VGA also using the PC audio
7.AV IN and YPbPr from a DVD
HDMI
VGA
SCART
PC AUDIO
Y1
Pb1
Pr1 R1
L1
Av1
AUDIO
HDMI DVI
R L
HDMI
SCART
SCART
VGA
VGA
Replace batteries with new ones
Clean the upper edge of remote controller (IR transmitter)
Check contacts of the battery box.
Perform some basic troubleshooting procedures as the following before you contact your local
support center . If the problem still exists, please record the model and serial number of your TV,
and contact your local support center.
Check if power cord is properly connected to the wall AC outlet and the outlet is electrified.
Make sure you have pressed power on/off button on the front panel
Check brightness and contrast setting.
Checking volume setting.
Check volume setting.
Check if Mute button on remote controller is pressed
Check color system setting
Sound system
Try to find out the equipment that brings interference and keep it away.
Try to plug power cord into another AC outlet
Check the antenna (direction and location) and /or cable connection.
25
Attach purchase
receipt here
~~Warranty
IMPORTANT: PLEASE RETAIN THIS WARRANTY CARD
WITH YOUR PURCHASE RECEIPT
This product is covered by a 12 month warranty from the date of purchase when the
appliance is used solely for domestic purposes. For commercial use, the product is covered
by a 90 day warranty from the date of purchase.
The warranty is valid against mechanical or electrical defects if the product is used in
accordance with the instructions and provided that it is not connected to an unsuitable
supply, dismantled or interfered with or damaged in any way.
Under this warranty any parts found to be defective will be repaired or replaced free of
charge, or the unit will be exchanged with like or similar, solely at the discretion of Prima
Australasia.
To obtain service under warranty, purchase receipt is required. This warranty in no way
affects your rights under statutory law.
Retailer:
Date of purchase:
Name of product:
Model number:
If the product you have purchased is/becomes faulty, please contact the place of
purchase for their returns policy and procedure. You must retain your proof of
purchase for your warranty to be valid.
WARRANTY SERVICES:
PO BOX 326, BRAESIDE, VIC, 3195
TEL: 1300 366 155
26
Monday-Friday 8.30am-5.00pm(AEST)
No product will be accepted at the store without a
reference number issued by the Customer Care Centre
above,along with your original store receipt.
STOP
27
DISTRIBUTED IN AUSTRALIA BY:
Prima Australasia Pty Ltd.
PO BOX 326,Braeside,Vic 3195
TEL:1300 366 155
www.primaaustralasia.com.au
SOUTHERN AFRICA DISTRIBUTION BY:
Nu World lndustries Pty Ltd.
PO BOX 8964,JHB 2000
TEL:(011)321-2111/Service:0800 110 812
www.nuworld.co.za
… 20 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Telefunken TLD 3703 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Telefunken TLD 3703 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info