781069
15
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
GB
15
level until reaching the maximum value of
P. Using the sensor (4), you can redu-
ce the power level.
For a fast powering up at maximum power:
with the plate at 0, touch the sensor (4)
once. The plate will directly activate at
level 9.
By continuing to press down on any of
these two sensors (4) or (5), they
will repeat the action every half a second,
without needing to press consecutively.
SWITCHING THE HOTPLATES OFF
With the sensor (4), lower the power to
level 0.
The hotplate will automatically power off.
For a fast power up: no matter what the
power level, by simultaneously pressing
the sensors and (5/4), the plate will
immediately power off.
By powering off a hotplate, an Hwill be
shown on the power indicator, if the glass
surface is at a high temperature, indicating
that there a risk of burning. When the tem-
perature has fallen, the indicator will power
off if the top is disconnected or, if it is tur-
ned on, it will indicate a 0.
POWERING OFF THE DEVICE
At any time, you can disconnect the top by
pressing the sensor (1). When doing
this, an acoustic signal is heard and the
power indicators (3) will turn off, except if
there is a residual Hheat indicator active
due to the plate temperature.
Locking the sensors
Using the locking sensor (8), you can
block all the sensors on the touch control
panel. This will make it possible to avoid
undesired accidental operations occurring
or children being able to manipulate the
control.
Bear in mind that with the touch control
powered up, the on/off sensor (1)
makes it possible to turn it off even if the
locking is activated (pilot 10 on). On the
other hand, if the touch control is turned
on, the locking function does not allow for
activating the on/off sensor (1). You
should first deactivate blocking.
To activate or deactivate the function,
simply keep pressing the sensor (8)
for about 1 second. When the function is
active, the pilot light (10) turns on.
Detecting pans
(induction hotplates)
The induction cooking plates incorporate a
container detector. This is to avoid the
plate operating without having a pan on
top or when the container is unsuitable,
e.g., if made of aluminium or another non-
metallic material.
The power indicator blinks if, with the plate
turned on, no container or an inappropria-
te container is detected.
If the containers are removed from the hot-
plate while operating, this will automati-
cally cut off the power supply and the
power indicator will blinks. When putting
the container on the cooking hotplate
again, the power supply restarts at the
power level that was selected.
The time for detecting the container is 3
minutes. If three minutes go by without
having placed a container on the hotplate
or if an inappropriate container is placed
there, the cooking plate deactivates.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Teka IR 641 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Teka IR 641 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 0.86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info