if the tip of the flame is yellow, the bur-
ner should be cleaned. If this anomaly
persists, contact the Technical Assistan-
ce Service in order that the main air inlet
can be adjusted or the gas supply pipe
cleaned.
* Cast iron plates should not be used on
the grid, because they reflect too much
heat onto the cooker’s hotplate.
* Pans placed on the burners should not
jut out beyond the edge of the hotplate,
so that the reflected flame does not
damage worktops with a plastic surface.
* Use pans with a flat base.
Maintenance of the burners
Whenever the gas taps are removed, you
should change the washer that is between
the taps and the supply pipe.
The burners are working properly when their
flame is stable and a greeny-blue colour. If
the tips of the flames are yellow, the burners
need to be cleaned; if the problem persists,
contact the Technical Service.
In order to guarantee the gas installation is
properly sealed and the burners are wor-
king properly, the hob needs to be inspec-
ted by specialised Technical Service per-
sonnel at least once every year.
Note:
Any alteration or adjustment needed by
the appliance should be made by aut-
horised technical personnel.
Environmental
considerations
The symbol on the product or on
its packaging indicates that this pro-
duct may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help pre-
vent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you purcha-
sed the product.
Packaging materials are organic and
fully recyclable. Plastic components
are identified by marking >PE<, >LD<,
>EPS<, etc. Throw out packaging mate-
rials, such as household waste, in the
container of your municipality..
