EN
6
• Never put your fingers or any other object in the filler tube (B) while the appliance is in operation.
Always use the pusher (A) provided for this purpose.
• Never open the cover (C) before the sieve (D) has come to a complete stop.
• Do not remove the pulp collector (G) while the appliance is in use.
• Always unplug the appliance from the mains after use.
• When you use the appliance for preparations with hard ingredients (for example, sugarcane),
you must not run it for more than 20 seconds consecutively.
• This appliance is fitted with a safety mechanism. To start the juice machine, the cover (C) must
be properly secured by the safety clamp (H). Opening the safety clamp (H) will stop the juice
machine. At the end of a cycle, place the control switch (I) to 0 and wait until the sieve (D) stops
completely before removing the cover.
• We recommend that you wash all the removable parts (A, B,C, D, E, G, L, M) in warm soapy
water (see paragraph ”Cleaning”). Rinse and dry them carefully.
• Unpack the appliance and place it on a solid, stable work surface.
• Ensure that all packaging has been removed before starting the appliance.
• Place the juice collector (E) on the body of the appliance (see Fig. 1).
• Place the sieve (D) in the juice collector (E). Ensure that the sieve is properly clipped onto the
drive shaft (J). You can hear an audible click when the sieve is positioned correctly (see Fig. 2).
• Fit the pulp collector (G) on the rear of the appliance (see Fig. 3).
• Fit the cover (C) on the appliance, spout to the rear (see Fig. 4).
• Push the safety clamp (H) to the rear until it locks into place. You will hear an audible “click” (see
Fig. 5).
• Slide the pusher (A) into the feed tube (B) aligning the groove on the pusher with the small ridge
in the feed tube.
• The juice jug cover (L) has a foam separator that keeps the foam in the jug (M) when you pour
the juice into a glass. If you do not want to separate the foam, remove the cover.
• Place the juice jug (M) under the pouring spout in front of the appliance (see Fig. 6).
• Plug in the appliance.
• To start the appliance, use the control switch (I).
• Insert the fruits or vegetables through the feed tube (B).
• The fruits and vegetables must be inserted only while the motor is running.
• Do not press too hard on the pusher (A). Do not use any other utensil. NEVER push with your
fingers.
• When you have finished, stop the appliance by turning the control switch (I) to 0 and wait until
the sieve (D) stops completely.
• When the pulp collector (G) is full, or the juice flow slows down, empty the pulp collector and
clean the sieve and the cover.
SAFETY SYSTEM
BEFORE FIRST USE
USING THE APPLIANCE
