723331
8
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
5
FOR YOUR SAFETY
• Do not touch any rotating parts before you turn o and unplug the vacuum cleaner.
• Do not use the appliance on wet surfaces.
• Do not immerse the appliance in water.
ELECTRO-BRUSH MALFUNCTION
The electro-brush does not function properly or makes an unusual sound
• Either the rotating brush or the axis is blocked: turn o the appliance and clean them.
• The brush is worn out: visit an authorized Service Center in order to have the brush changed.
The belt is worn out: if the belt makes noise, it means that it is slipping because it’s worn out. Visit an authorized
Service Center in order to have the belt changed.
The electro-brush stops while you are vacuuming
The thermal security feature has been activated: Turn o the vacuum cleaner by moving the Stop/Start button to
the Stop position (2.a) and unplug it. Check to see if any solid object is blocking the rotation of the brush. If this
is the case, remove the object and clean the electro-brush (g.10), then you may keep using the vacuum cleaner.
The electro-brush moves with diculty
If you nd that your vacuum cleaner slides with diculty along surfaces, progressively reduce the speed until you
reach the « Min » position (2.b). If the problem persists, take your appliance to the authorized Tefal Service Center
nearest to your home.
See the list of authorized Tefal Service Centers or contact the Tefal Consummer Service department.
4. Storage
After use, turn o your vacuum cleaner by moving the Stop/Start button to the Stop position (2a). Now you may
store your appliance vertically wherever you like, thanks to the parking position.
To place the vacuum cleaner in the parking position: Place the neck vertically in order to block the appliance.
To continue using the vacuum cleaner: Take it by the handle and make it swing backwards in order to unblock it
and leave the parking position.
CLEANING AND MAINTENANCE
IMPORTANT: Always turn o the appliance and unplug it before storing or cleaning.
1. Cleaning the dust tray (9)
1.a Fast emptying
Whenever the dust tray is full, empty it as follows: remove the tray by sliding it downwards (g.14), place it over
a bin and press the “Push” button in order to open the trap and empty the tray’s contents (g.15). Close the trap
(g.16) and replace the dust tray on the main body of your appliance (g.19).
1.b Complete cleaning procedure
It is advisable to clean the dust tray regularly.
• Remove the dust tray (g.14), then separate each of its components (9).
• Remove the foam rubber motor protection lter (9c).
Place the dust receiver (9a), the dust lter (9b) and the lid (9d) under warm water (g.20); then let them stand to
dry or dry them with a dry cloth.
• Wash the foam rubber motor protection lter (see paragraph 2).
Once the components of the dust tray are all dry, reassemble them; do the same with the extra foam rubber motor
protection lter (9c) provided as a supplement with your appliance.
• Close the dust tray and reposition it on the main body of your appliance (g.19).
2. Cleaning the foam rubber motor protection lter (9c)
ATTENTION: Never use your vacuum cleaner without the foam rubber motor protection lter.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tefal TY8479 - Air Force bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tefal TY8479 - Air Force in de taal/talen: Engels als bijlage per email.

De handleiding is 3,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info