3
Before the first use
Unpack the appliance
•
Remove the appliance from the packaging and unpack all the
accessories and printed documents.
• Open the lid by pressing the opening button located on the
lid – Fig.1.
• Install the spoon support: insert the plastic hook of the
support in the hole located on the bottom of the product,
and slide it downwards –
Fig.2.
Clean the appliance
• Remove the non-stick bowl, the inner removable lid and the
micro pressure valve. To remove the inner lid, press the
release clip on the right side to release the lid – Fig.3.
•
After removing the inner lid, push up the micro-pressure valve
through the hole on the underside of the lid with a finger –
Fig.4. To separate the upper and lower parts of the
micropressure valve, rotate the valve in the unlocking
direction by turning the upper triangle until it is aligned with
the open padlock symbol then separate – Fig.5 and Fig.6.
• Clean the bowl, the inner removable lid, the micro pressure
valve and all the accessories with a sponge and washingup
liquid. Wipe the outside of the appliance and the metal
parts of the lid with a damp cloth.
• Dry carefully.
• Replace the micro-pressure valve. Align the upper triangle
with unlocked padlock of the micropressure valve to close up
the two parts, then rotate in locking direction until the upper
triangle is aligned with the locked padlock which indicates
the two parts are locked, then re-fit the micropressure valve
down into the lid –
Fig.7. Make sure that the triangle in the
Description
Read the instructions
and carefully follow
the operating method.
1. Steam basket
2. Graduation for water and rice
3. Removable non-stick bowl
4. Rice spoon
5. Lid opening button
6. Lid
7. Inner removable lid
8. Measuring cup
9. Micro pressure valve
10. Condensation collector
11. Handle
12. Spoon support
13. Power cord
14. Hotplate
15. Sensor
16. Control panel
a. Keep warm indicator light
b. RICE/STEAM cooking mode
c. Mode switch
d. Cooking indicator light
e. SLOW COOKING mode
f. Control switch
