682020
8
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
5
Before cleaning, ensure that
your steam generator is
u
nplugged and that the sole-
plate and the iron rest have
cooled down.
Do not use any
descaling substances
(vinegar, industrial
descaling products,
etc.) when rinsing the
anti-scale collector :
they could damage it.
Before descaling or
cleaning your
generator, you must
let it cool down for at
least 2 hours to avoid
any risk of burns.
Maintenance and cleaning
Cleaning your generator
Do not use detergent or descaling products for cleaning the soleplate
base-unit.
Never hold the iron or the base unit under the tap.
Regularly clean the soleplate with a damp, non-metallic washing-up pad.
Clean the plastic parts of the appliance occasionally with a soft cloth.
Descaling your generator easily :
For longer generator life, and to avoid scale emissions, your generator is equipped
with a built-in anti-scale collector. This collector, located in the tank, automatically
removes the scale that forms inside.
Operation:
An orange “anti-scale” light located on the control panel starts blinking to tell you
that the anti-scale collector needs rinsing -
fig.11.
Caution: this operation must not be performed until the generator has
been unplugged for at least two hours and has completely cooled down.
When performing this operation, the generator should be placed near a sink
as water may flow out of the tank when it is opened.
Once the generator has cooled down completely, remove the anti-scale collector
cap -
fig.12.
Unscrew the anti-scale collector and remove it from the housing; it contains the
scale that has built up in the tank -
fig.13 and fig.14.
To clean the collector properly, just rinse it under running water to remove the
scale it contains -
fig.15.
Put the collector back into its housing and screw it in completely to keep it water-
tight -
fig.16.
Refit the scale collector cover -
fig. 18.
The next time you use your iron, press the “restart” button on the control panel
to turn off the orange “anti-scale” light.
Storing your generator
Press the illuminated on/off switch and unplug the generator. Store the electrical
cord in its storage place –
fig.17.
Raise the retaining hoop over the iron until it locks into place (audible click) –
fig.2.
Your iron is then safely retained on its base. Warning: do not touch the soleplate
while still hot.
Wind the steam cord around the generator and insert it in its side storage place. –
fig.18.
Leave the iron (and the iron rest) to cool down for 30 minutes.
You can then put your steam generator away, carrying it by the handle
fig.1.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
EN
1800119824 GTG3 GV8700E0_110x154 29/06/10 15:23 Page5
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tefal GV8710 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tefal GV8710 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info