16
Getting started
The paragraph numbering corresponds to
the numbers in the diagrams.
- Before using for the first time, wash all accessory parts in hot,
soapy water (see “cleaning” paragraph). Rinse and dry.
- Set the motor unit on a clean, stable, dry, flat surface.
- Plug in your appliance.
- Pulse (intermittent operation): turn the button (a2) to the Pulse
position and use in short bursts for better control of certain
preparations.
- Continuous operation: turn the button (a2) to the 1 or 2 position.
- Stop: turn the button (a2) to the 0 position.
1. Assembling the bowl and lid
ACCESSORIES USED
- Bowl unit (b).
ASSEMBLING THE ACCESSORIES
- Place the bowl (b3) on the motor unit (a), with the bowl handle positioned slightly to the right of the button.
- Place the lid (b2) on the bowl (b3).
- Lock the lid by pushing it toward the right into the bowl handle.
- Lock the whole assembly by turning it toward the right.
The lid must be locked onto the bowl before locking the assembly onto the motor unit (a).
2. Removing the bowl and lids
- Unlock by turning the assembly toward the left.
- Unlock the lid by pushing toward the left to free it from the bowl handle.
- Now you can lift and remove your lid.
3. Blending/chop/knead
(depending on the model)
ACCESSORIES USED
- Bowl unit (b).
- Drive shaft (c).
- Metal blade (d1) for chopping and mixing.
- Metal blade (d1) or plastic kneading blade (d2) for kneading or mixing (depending on the model).
ASSEMBLING THE ACCESSORIES
- Place the bowl (b3) on the motor unit (a) without locking it.
- Slide the metal blade (d1) or plastic kneading blade (d2) onto the drive shaft (c) and position the assembly on the
motor unit outlet (a1).
- Place the ingredients in the bowl.
- Put on the lid (b2) and lock it onto the bowl (b3), then turn the assembly toward the right to the stop.
- To remove the bowl-lid assembly: turn the assembly toward yourself to release it and unlock the lid.
