7 : Juice fruits (depending on model)
ACCESSORIES USED:
• Fruit juicer assembly
(j).
• Bowl
(b3).
FITTING THE ACCESSORIES:
• Fit the bowl
(b3) onto the motor unit (a) and lock it in place.
• Slide the drive pin
(j2) onto the motor unit drive (a1).
• Place the basket
(j3) onto the bowl and lock it in place.
• Fit the cone
(j1) onto the basket funnel (j3).
• To remove the fruit juicer assembly: release the basket
(j3) then the bowl and you can then remove the
assembly from the motor unit.
STARTING AND TIPS:
• Cut the fruit in half and hold in place on the cone (j1).
• Turn the speed selector (a3) to position 1 to start.
You can get up to 0.6l of fruit juice without emptying the bowl.
• Caution: you must rinse the basket every 0.2l.
8 : Storage of the accessories
• Your food processor has a built-in storage drawer (i) where you can place the multi-purpose blade (d), and the
4 vegetable cutter inserts
(f).
• After putting the accessories inside, slide the storage drawer
(i) inside the motor unit (a).
9 : Finely chopping small quantities (depending
on model)
ACCESSORIES USED:
• Chopping assembly.
• Finely chop in seconds: dry apricots, dry figs, cored prunes:
quantity/maximum time: 40g/6 seconds.
Cleaning
• Unplug the appliance.
• To make cleaning easier, rinse the accessories each time after use.
• Wash and dry the accessories: they are dishwasher proof.
• Pour hot water with a few drops of washing up liquid into the blender jug
(h3). Close the lid (h2), with the
measuring cap
(h1) fitted. Press the pulse button a few times. Unplug the appliance. Rinse the jug.
• Do not immerse the motor unit
(a) in water, or place it under running water. Wipe it with a damp sponge.
• The blades of the accessories are very sharp. Handle them with precaution.
Tip: If your accessories are stained by food (carrots, oranges…), wipe them with a cloth soaked with cooking oil,
then clean as usual.
GB
33
