628128
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
AM BW (BANDWIDTH) BUTTON
Short press [AM BW] button to choose 6, 4, 3, 2, 1 kHz
bandwidth. This may help to reduce interference on some
frequencies. Using WIDE usually results in better audio
fidelity, while using narrow limits the audio fidelity somewhat.
You can use it in MW, LW and SW band.
10
19
TO STORE STATION
There are total 500 preset memories within PL-310. For
FM, MW, and LW, each band has 100 preset memories;
and 200 preset memories for SW.
1) ATS (Auto Tuning Storage) on FM
1. Turn on the radio, and fully extend the antenna.
2. Short press [FM] button to select FM band.
3. Long press on [FM] button with a "B" sound and
frequency is running on the display. All the available
stations will be stored in the memory automatically. After
the long "B--" sound to be heard, ATS is completed and
is in the status of memory address.
4. Then use the [TUNING] knob to tune around for those
stored stations.
MW, LW or SW ATS is as same as the FM ATS.
SYSTEM SETTING
Frequency range setting for FM
Turn off the radio, long press [FM SET] button, until 87.5-
108MHz, 64-108MHz, 76-108MHz, or 87-108MHz appears
in the display. Quickly keep pressing on the [FM SET]
button to select suitable frequency range for your local FM.
Changing the clock format
Turn off the radio, long press [12/24] button, until " "or
" " appears in the display. If " " appears in the
display, which means the clock system will be in the 12 hour
format.
Turn off the radio, long press [9/10kHz] button until "9kHz"
or "10kHz" appears in the display. By long pressing again,
the alternative band step would be shown. The temperature
is also shown on screen at the same time.
In general practice, the 10kHz is to be used for broadcasting
MW(AM) as well as the temperature in the degree of
Fahrenheit ( ) for the North America region.
In order to provide convenience to the end users, the
"10kHz" is default to be displayed with temperature in the
degree of Fahrenheit ( ) and for "9kHz" to be displayed
with temperature in the degree of Centigrade ( ) together.
If the display shows "10kHz" with degree of Fahrenheit ( ),
which means this radio is set to 10 kHz step for MW(AM)
with temperature in Fahrenheit ( ).
MW(AM) step setting
Method 4:
Method 5: Auto-scan memory (see page12)
Method 6: (see
page 12)
Manual memory search (see page 12 )
Direct key in the station address number
2) ATS (Auto Tuning Storage) on MW or LW
1. Press & release [MW/LW] button to select MW or LW.
2. Press & hold [MW/LW] button and followed a "B" sound
and ATS starts to scan the radio stations in MW or LW.
3)ATS (Auto Tuning Storage) on SW
1. Fully extended the antenna, then press and release SW
[ ] or [ ] button to select SW.
2. There are mode A & mode B in SW.
Mode A: press & hold [ ] button to scan all radio stations
within all meter bands.
Mode B: press & hold [ ] button to scan all radio stations
in present meter band only.
ATS (Auto Tuning Storage) on FM, MW, LW or SW band
www.tecsunradio.com hch@cantonmade.com
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tecsun PL310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tecsun PL310 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info