424807
12
Verklein
Vergroot
Pagina terug
1/41
Pagina verder
www.technomate.com
20 21
Your Digital Partner for Life
Goto Reference : Move the dish to the 0 position.
Antenna Longitude : Edit antenna longitude by pressing / buttons and numeric buttons.
Antenna Latitude : Edit antenna latitude by pressing / buttons and numeric buttons.
- Go To : Save the current setting of USALS System.
2. Scan : Press Red ( ) button on the remote to begin satellite search.
3. Auto Navigation : Press Green ( ) button the remote to begin auto navigation.
* Note : When you change each parameter, you need to know exact parameter of the LNB to modify L.O(local oscillator)
frequency.
- Search Type : Select the type of channel search
you want by pressing / buttons
on the remote.
All : To search all the Free To Air and scrambled
channels, TV & Radio channels.
Free : To search Free To Air channels only.
TV : To search TV channels only.
- Network Search : Select Network Search ON/OFF
to find more transponders
through NIT Search.
- Scan : Begin channel search of the selected satellite.
5. Auto Navigation : Press Red ( ) button on the remote.
6. Auto Navigation Blind Search : Press Green( ) button on the remote and then
begin Blind Search of the selected satellite.
* Note : Make sure that the signal level of the selected satellites is high by the signal quality bar. If the signal quality is lower
than 50%, go gack to satellite Setup and check LNB DiSEqC Switching, ect.
1. Select DiSEqC 1.2 or USALS in the Motorized
Setting menu.
2. In the viewing mode, Press POS button on
the remote to display DiSEqC Motor View
Control.
3. Press / buttons on the remote to move
DiSEqC Motor to get the best singal.
DiSEqC Motor View Control
All the available channels/satellites can be
searched in this menu. Select the satellite and
save before Auto Search.
1. Press the MENU button on the remote to
display the main menu.
2. Use the / and / buttons to move in
the menu.
3. Select Auto Navigation, Auto Navigation
menu will appear.
4. Select the satellites you want to search by pressing the OK button on the remote.
You can select more satellites by pressing the / buttons and OK button on the
remote.
Auto Navigation
1. Select the satellites you want to search by
pressing the button on the remote.
2. For Polarization, choose from ALL, V or H. For
Scan Mode choose either Fast or Detail.
3. Press the OK button to start scanning.
4. Auto Navigation Blind Search : Press
Red( )button on the remote and then
begin Blind Search of all ‘selected’ satellite.
Blind Search
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technomate tm 6800 hd bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technomate tm 6800 hd in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 2,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info