1. Turn on your TV and receiver.
2. The language selection menu will be
1. Select a country and press the OK button
on.
Country
1. Press the MENU button on the remote to
display the main menu.
2. Use / and / button on the remote to
move in the menu.
3. Select Satellite Setup, the Satellite Setup
menu will appear.
4. Select each menu you want to edit/change.
- Satellite : Select any satellite by pressing /
buttons on the remote.
- Transponder : Select the Transponder.
- LNB Power : Select LNB Power ON/OFF / 13V /
18V.
- LNB Type : Select your LNB Type Single / Universal /
OCS.
- LNB Freq : Select LNB oscillator frequency.
- 22KHz : Select ON/OFF of 0/22 KHz.
- DiSEqC 1.0 : Select DiSEqC 1.0 Port.
- DiSEqC 1.1 : Select DiSEqC 1.1 Port.
5. Scan : Press Red ( ) button on the remote to begin satellite search.
6. Rename : Press Green ( ) button on the remote to rename the selected
satellite.
7. Auto Navigation : Press Green ( ) button on the remote to begin auto
navigation.
8. Save : Press Yellow ( ) button on the remote to save the selected satellite.
9. Delete : Press Blue ( ) button on the remote to de select the selected satellite.