1. Power :
To switch the receiver between “Standby” and “Power ON” modes.
2. Standby/Power Indicators :
Red in Standby mode and no light in Power-On mode.
3. Menu :
To enter or exit the Main Menu.
4. Select :
To open the Channel List in non-menu mode and to select/confirm an item in
menu mode.
5-6. VOL(/) :
To change the volume level in non-menu mode and to modify a setting in
menu mode.
7-8. CH(/) :
To change channels or to move Up/Down in the menus/application.
No. Name Connector Function
1 RF OUT UHF 21-69 IEC 169-2 MALE Output to TV
2 TV ANT IN IEC 169-2 FEMALE Input from analog terrestrial antenna
3 USB USB A-type USB 2.0
4 RS-232C DB-9 Low speed serial port
5 S/PDIF Fiber Optic Digital audio output (Optical)
6 HDMI HDMI Digital Video/Audio Output
7 LAN RJ-45 10/100Mbps Ethernet
8 VCR/AUX SCART SCART CVBS Video Output
CVBS, RGB Video Input
Audio Output
9 TV SCART SCART CVBS, RGB Video Output, Audio Output
10 VIDEO RCA cinch Composite video output
11 AUDIO L RCA cinch Left audio output
12 AUDIO R RCA cinch Right audio output
13 Y RCA cinch Component video output(Y)
14 Pb RCA cinch Component video output(Pb)
15 Pr RCA cinch Component video output(Pr)
16 LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner
17 LNB OUTPUT IEC 169-24 FEMALE IF loop-through output from digital tuner
18 DVB-T IN IEC 169-2 FEMALE Cable signal input to digital tuner.
19 LOOP OUT IEC 169-2 MALE Loop-through output from digital tuner.
20 VIDEO(option) RCA cinch Composite video input
21 AUDIO(option) RCA cinch Left audio input
22 AUDIO(option) RCA cinch Right audio input
23 Y(option) RCA cinch Component video input (Y)
24 Cb(option) RCA cinch Component video input (Cb)
25 Cr(option) RCA cinch Component video input (Cr)
26 eSATA E-SATA External SATA
