There is also double sided tape included with the wall mount. On smooth surfaces this can be used instead of
drilling holes. The mounting surface can, however, affect the transmission range. If for example the unit is attached
to a piece of metal, it may then either reduce or increase the transmitting range. For this reason, we recommend
not placing the unit on any metal surfaces or in any position where a large metal or highly polished surface is in the
immediate proximity (garage doors, double glazing, etc.). Before securing in place, please ensure that the Weather
station can receive the 433MHz signal from the Thermo-hygro transmitter at the positions that you wish to situate
them.
The Thermo-Hygro Outdoor Transmitter simply clicks in or out of the holder. When inserting or removing the
Thermo-Hygro Outdoor Transmitter from the wall holder please hold both units securely.
CARE AND MAINTENANCE:
• Extreme temperatures, vibration and shock should be avoided as these may cause damage to the units and
give inaccurate forecasts and readings.
• When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents
as they may mark the LCD and casings.
• Do not submerge the units in water.
• Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new
batteries of the recommended type.
• Do make any repair attempts to the units. Return it to their original point of purchase for repair by a qualified
engineer. Opening and tampering with the units may invalidate their guarantee.
• Do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in
forecasts and readings and thereby reduce their accuracy.
SPECIFICATIONS:
Temperature measuring range:
Indoor : -9.9ºC to +59.9ºC with 0.1ºC resolution
14.2°F to +139.8°F with 0.2°F resolution
51
