594890
15
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
15
EN
MONT
_
TechniLAN
_
4
_
4
_
aktiv
_
DE
_
EN.doc 04.09.2012 09:51 Seite 15
The maximum power consumption can be estimated by using the following formula:
Vertmax
mA400mA350 InI
+
+
=
Here n is the number of connected TechniLAN sockets. In this manner, it is assumed that the
power consumption for the sockets is at 350 mA and the consumption for the TechniLAN 4/4
aktiv is at 400 mA for conditions that are not ideal, for example lengthy coaxial cables.
I
Vert
is the power which is fed into the distribution system (multi-switch and LNB). This is normally
a maximum of 400 mA.
When necessary, a wall power supply is to be connected to the multi-switch which then supplies
the distribution system with power. This is also true when a receiver is not capable of supplying
the required power for the distribution system and the TechniLAN socket.
5 Installation and Startup
Connect the TechniLAN 4/4 aktiv to the signal output of the multi-switch or LNB. F-to-F quick
connectors (Art. No. 0001/3312) can be used for multi-switches from the series
TechniSwitch 5/8, TechniSystem 5/8 and/or GigaSwitch 9/8 due to the similar grid
system.
The signal outputs of the TechniLAN 4/4 aktiv are to be connected to the participant
sockets using coaxial cabling.
Connect the provided wall power supply. Take care not to exceed the maximum amount of
power allowed by the wall power supply (see section 4.3).
Check, using the LEDs on the TechniLAN participant sockets, as to whether or not the
operating power is being supplied at the socket. The green LEDs must be lit at every socket
(see section 4.2).
Several seconds later, the Coax-Link LED and the yellow traffic LEDs of the TechniLAN
participant sockets should light up and signal that the coaxial cable network is ready for
operation (see section 4.2). Network capable terminal devices can now be operated via the
Ethernet sockets of the participant sockets and the TechniLAN 4/4 aktiv.
6 Technical Data
TechniLAN 4/4 aktiv, Article Number 0000/3637
Number of HF Inputs
4x for satellite (0,95…2,15 GHz) and terrestrial (80...790 MHz)
Number of HF Outputs
4x for satellite (0,95…2,15 GHz), terrestrial (80…790 MHz);
connected within the frequency range of the coaxial cable network
(2..28 MHz)
Reflexion Dampening
10 dB
Shielding Measurements
According to EN 50083-2 (TechniSelect S)
Network
Coaxial cable network according to HomePlug-AV standard
Max. Data Rate
200 Mbit/s
Number of Network Sockets
2x Fast Ethernet (100 Mbit/s)
Satellite Range Dampening
4
2…3 dB
Terrestrial Dampening
4
1…2 dB
Power Supply
Device, participant sockets and distribution technology without power
supply are supplied via the wall power supply.
Wall power supply 230 V / 13 V, 3 A DC, short-circuit and overload
protected.
4
value at the lowest …highest limit of the band
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technisat TechniLAN 4-4 aktiv bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technisat TechniLAN 4-4 aktiv in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info