65398

Technisat Digit MF4 S Handleiding

14
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
DDiiSSEEqqCC
1.2
With integrated CONAX decoding system and
PCMCIA interface for insertion of a CA module.
For reception of free-to-air and encrypted (e.g.
CONAX, VIACCESS, IRDETO, SECA etc. ) satellite
programmes.
Operating Manual
DIGIT MF4-S
With motor-driven antenna facility and
software update via satellite.
1 Contents
1 Contents . . . . . . . . . . . . . . . . . . . . .2
2 Illustrations . . . . . . . . . . . . . . . . . . .5
3 Please read this first . . . . . . . . . . .8
Safety notices . . . . . . . . . . . . . . . . . . . . . . .9
4 Connections . . . . . . . . . . . . . . . . .11
4.1 External unit . . . . . . . . . . . . . . . . . . . . . . . .11
4.2 Connecting to a television set . . . . . . . . . .11
4.3 Video cassette recorder (VCR) . . . . . . . . .11
4.4 Hi-fi amplifier . . . . . . . . . . . . . . . . . . . . . . .11
4.5 Serial interface (RS 232) . . . . . . . . . . . . . .12
4.6 Mains power connection . . . . . . . . . . . . . .12
5 Initial installation . . . . . . . . . . . . .12
6 Settings . . . . . . . . . . . . . . . . . . . . .15
6.1 Operating languager . . . . . . . . . . . . . . . . .15
6.2 Basic settings . . . . . . . . . . . . . . . . . . . . . . .15
6.2.1 Time difference to GMT (hours) . . . . . . . . .16
6.2.2 Country . . . . . . . . . . . . . . . . . . . . . . . . . . .16
6.2.3 Remote control code . . . . . . . . . . . . . . . . .16
6.2.4 Standby clock . . . . . . . . . . . . . . . . . . . . . . .16
6.3 Audio/Video settings . . . . . . . . . . .17
6.3.1 Picture format . . . . . . . . . . . . . . . . . . . . . . .17
6.3.2 Language (Audio signal) . . . . . . . . . . . . . .17
6.3.3 Language (Sub-titles) . . . . . . . . . . . . . . . . .17
6.3.4 TV SCART mode . . . . . . . . . . . . . . . . . . . .17
6.3.5 VCR SCART mode . . . . . . . . . . . . . . . . . .18
6.3.6 Dolby Digital (AC3) . . . . . . . . . . . . . . . . . .18
6.4 Antenna settings . . . . . . . . . . . . . .18
6.4.1 Switching DiSEqC on/off . . . . . . . . . . . . . .19
6.4.2 Setting the switching matrix . . . . . . . . . . .19
6.4.3 Additional settings/LNC properties . . . . . .20
6.4.4 Rotating mechanism . . . . . . . . . . . . . . . . .21
7 Operation . . . . . . . . . . . . . . . . . . . .21
7.1 Switching on and off . . . . . . . . . . . . . . . . .21
7.2 Programme selection . . . . . . . . . . . . . . . . .22
7.2.1 Using the programme up/down keys . . . . .22
7.2.2 Using the numeric keys . . . . . . . . . . . . . . .22
7.2.3 Using the Navigator (Programme list) . . . .22
7.2.3.1 Selecting a list . . . . . . . . . . . . . . . . . . . . . .22
7.2.4 Calling up blocked programmes . . . . . . . .23
7.2.5 Information box . . . . . . . . . . . . . . . . . . . . .23
7.3 Reception of encrypted programmes . . . . .23
7.3.1 Special functions . . . . . . . . . . . . . . . . . . . .24
7.3.1.1 Multifeed options . . . . . . . . . . . . . . . . . . . .24
2
7.3.1.2 Selecting a starting time . . . . . . . . . . . . . .24
7.3.2 CONAX PIN code . . . . . . . . . . . . . . . . . . .25
7.4 Volume control . . . . . . . . . . . . . . . . . . . . . .25
7.5 TV/Radio switching . . . . . . . . . . . . . . . . . .25
7.6 Selecting a different language
(TV mode) resp. station (radio mode) . . . .26
7.6.1 Dolby Digital (AC3 mode) . . . . . . . . . . . . .26
7.7 Return to last programme selected . . . . . .26
7.8 Display time and programme info . . . . . . .27
7.9 Additional programme information . . . . . . .27
7.10 Transponder information . . . . . . . . . . . . . .27
7.11 Freeze-frame . . . . . . . . . . . . . . . . . . . . . . .27
7.12 Sleep timer . . . . . . . . . . . . . . . . . . . . . . . . .28
7.13 Video text . . . . . . . . . . . . . . . . . . . . . . . . . .28
7.14 Sub-titles . . . . . . . . . . . . . . . . . . . . . . . . . .29
7.15 Electronic Programme Guide . . . .29
7.15.1 Acquiring SFI data . . . . . . . . . . . . . . . . . . .30
7.15.2 Interrupting download procedure . . . . . . . .30
7.15.3 Calling up the Electronic Programme Guide30
7.15.4 Now . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
7.15.5 Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
7.15.6 More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
7.15.7 SFI functions . . . . . . . . . . . . . . . . . . . . . . .32
7.15.7.1 SFI information . . . . . . . . . . . . . . . . . . . . . .32
7.15.7.2 SFI timer programming . . . . . . . . . . . . . . .32
7.15.7.3 SFI programme overview . . . . . . . . . . . . . .33
7.15.7.4 SFI overview by programme type(Genre) .34
7.15.8 Terminating SFI . . . . . . . . . . . . . . . . . . . . .34
7.16 Timer recordings . . . . . . . . . . . . . . . . . . . .35
8 Changing basic programming . . . .38
8.1 Configuring the Favourites list . . . . . . . . . .38
8.1.1 Calling up programme list manager . . . . . .39
8.1.2 Adding programmes to Favourites list . . . .40
8.1.3 Deleting programmes . . . . . . . . . . . . . . . . .40
8.1.4 Sorting programmes . . . . . . . . . . . . . . . . .41
8.2 Programming the electr. progr. guide . . . .42
8.2.1 Selecting channels/stations . . . . . . . . . . . .43
8.2.2 Start category . . . . . . . . . . . . . . . . . . . . . . .44
8.2.3 Updating time . . . . . . . . . . . . . . . . . . . . . . .44
8.2.4 Updating . . . . . . . . . . . . . . . . . . . . . . . . . . .44
8.2.5 SFI channel . . . . . . . . . . . . . . . . . . . . . . . .44
8.3 Parental control . . . . . . . . . . . . . . . . . . . . .45
8.3.1 Changing the unit PIN . . . . . . . . . . . . . . . .45
8.3.2 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
8.3.3 Selecting a channel/station . . . . . . . . . . . .46
8.4 Programme scan . . . . . . . . . . . . . .46
8.4.1 Automatic scan . . . . . . . . . . . . . . . . . . . . .47
8.4.2 Satellite scan . . . . . . . . . . . . . . . . . . . . . . .47
8.4.3 Transponder scan . . . . . . . . . . . . . . . . . . .48
5
8.4.4 Manual scan . . . . . . . . . . . . . . . . . . . . . . . .49
8.4.5 After the scan . . . . . . . . . . . . . . . . . . . . . . .49
8.5 Service settings . . . . . . . . . . . . . .50
8.5.1 Activating the default setting . . . . . . . . . . .51
8.5.2 Delete all programmes . . . . . . . . . . . . . . . .51
8.5.3 Updating programme list (ISIPRO) . . . . . .51
8.5.4 Updating software . . . . . . . . . . . . . . . . . . .53
8.5.5 Copying settings . . . . . . . . . . . . . . . . . . . .54
8.6 System configuration . . . . . . . . . . . . . . . . .55
8.7 Encryption system . . . . . . . . . . . . . . . . . . .55
9 Operation with a rotating antenna 55
9.1 East and West limits . . . . . . . . . . . . . . . . .55
9.1.1 Deleting existing limits . . . . . . . . . . . . . . . .56
9.1.2 Setting the Eastern limit . . . . . . . . . . . . . . .56
9.1.3 Setting the Western limit . . . . . . . . . . . . . .56
9.2 Geo-positioning . . . . . . . . . . . . . . . . . . . . .57
9.3 Setting a satellite position . . . . . . . . . . . . .58
9.3.1 Selecting a satellite position . . . . . . . . . . .58
9.3.2 Adjusting the satellite antenna . . . . . . . . . .59
9.3.2.1 Test transponder/LNC configuration . . . . .59
9.3.2.2 Manual adjustment of antenna . . . . . . . . .60
9.3.2.3 Automatic fine adjustment (Autofocus) . . .60
9.3.3 Storing satellite position . . . . . . . . . . . . . . .60
9.4 Current satellite list . . . . . . . . . . . . . . . . . .61
9.5 Deleting satellite position . . . . . . . . . . . . . .62
9.6 Reference position . . . . . . . . . . . . . . . . . . .62
10 Technical terms . . . . . . . . . . . . . .62
11 Technical Data . . . . . . . . . . . . . . .65
12 Trouble-shooting guide . . . . . . . . .67
13 Annexure . . . . . . . . . . . . . . . . . . . .69
14 Index . . . . . . . . . . . . . . . . . . . . . . .71
For daily use . . . . . . . . . . . . . . . . .74
6
Your unit carries the CE logo, and complies with all relevant EU standards.
Subject to change without notice, subject to printing errors.Correct as at 10/04
TechniSat and DIGIT MF4-S are registered trademarks of
TechniSat Digital GmbH
Postfach 560
D-54541 Daun, Germany
www.technisat.de
Technical Hotline
(049) 0180/5005-910*
*0,12 EUR/Min. via the Deutsche Telekom AG network
Note !
If you should ever have to send in your unit, please use only the following address:
TechniSat Teledigital AG
Service-Center
Löderburger Str. 94
D-39418 Stassfurt, Germany
3
2 Illustrations
*This function is only available if the appropriate data is being broadcast on the selected programme slot.
Remote control option:
By switching the remote control options you can use this remote control unit to operate two
receivers, one television set as well as a video recorder, using the same coding.
> To switch the remote control option, please simultaneously press the desired key
(SAT1, SAT2, VCR or TV) and OK!!!
Please note:
To operate this receiver, the remote control option of the remote control unit selected here
and the remote control code selected in accordance with Point 6.2.3 must be identical.
Remote control
On/Stand-by
Programme list On/Off
Back
Info
Stop/Freeze-frame
Menu On/Off
Sound On/Off
EXTERN
Multi-function keys
TV/Radio
Volume +
Volume +/-
SFI
Programme -
Volume -
Programme +/-
Programme +
Video text*
On/Mix/Off
OK
Arrow key right
Arrow key left
Arrow key up
Arrow key down
Sleep timer
Option*
in TV mode:
Sound/sub-title selection,
special functions
in Radio mode:
Station
selection by switching of
sound sub-carriers
Numeric keys
4
LNC
input
SCART socket
TV
Audio output
digital (optical)
SCART socket
VCR
Mains socket
Audio outputs
analogue
RS 232
interface
Audio output
digital (electrical)
Programme select
up/down
On/Stand-by
LED display
Card reader for CONAX Smartcard:
> Insert the CONAX Smartcard (gold-coloured chip at the bottom,
and in the direction of insertion) carefully into the card reader as
far as it will go.
Inserting the CA module:
> Please follow the instructions of the manufacturer of the CA
module and card.
> Insert the desired Smartcard in the appropriate CA module.
> Now insert the CA module carefully in the slot provided.
7
Dear customer,
congratulations on your decision to purchase the TechniSat
DIGIT MF4-S digital receiver.
The operating manual you are reading is designed to help you
gain optimum use and enjoyment from the comprehensive
functions of your new digital receiver.
We have designed the operating manual to be as comprehen-
sive as necessary, and as simple as possible.
The range of functions of your receiver is constantly being
expanded, and software updates are available for this. This
may occasionally mean that operating steps are added which
are not described in this manual, or there may be changes to
functions already included. We therefore recommend that you
occasionally visit the TechniSat homepage in the Internet,
from where you can download the current version of the ope-
rating manual.
We wish you many years of listening and viewing pleasure
with your TechniSat DIGIT MF4-S!
Your
TechniSat Team
Please read this first
> Before you begin operating your receiver, please first
check whether the package contains all the compo-
nents that should be included. The following are supp-
lied:
1 digital receiver, 1 mains power cable,
1 remote control, 1 operating manual,
1 guarantee card, 2 batteries (1,5V micro-cell)
1 SCART cablel.
> Insert the batteries provided in the battery compart-
ment of the remote control, observing the polarity indi-
cated.
> Before connecting your digital receiver, please first
read the safety notes in Chapter 3.
> Chapters 4, 5 and 6 describe how to connect the
digital receiver to the external unit (dish, LNC, LNB,
...), to the television set, VCR, etc., and how to make
the appropriate settings. These settings need be made
only once, and will only need to be adapted if your
external unit changes, or if additional appliances are
connected.
> Chapter 7 describes all the functions necessary for
daily operation of the receiver, e.g. programme selec-
tion.
> In Chapter 8 you will find information on how to set
new programmes, or how to change the order of pro-
grammes.
> Chapter 9 describes the settings required if you are
operating a motorised rotating antenna.
> Technical terms used in the operating manual are
explained in Chapter 10.
> Technical data and specifications can be found in
Chapter 11.
> A trouble-shooting guide to help you overcome pro-
blems can be found in Chapter 12.
Important operating instructions
Operation of the digital receiver is simplified by the use of so-
called "On Screen Displays", this also serves to reduce the
number of keys required on the remote control unit. All func-
tions are displayed on the screen, and can be operated with a
few keys. Related functions are combined in a "MENU". The
function selected is highlighted in colour. The “function keys”
red, yellow, green and blue are displayed along the bottom of
the screen in the shape of coloured bars. These coloured
bars represent different functions in the individual menues,
which can be implemented by pressing the
appropriate coloured key (“multi-function key”) on the remote
control. The “function keys” are only active when a brief des-
8
cription is displayed in the appropriate field.
Key descriptions and terms that appear on the OSD menu
are printed bold in this operating manual.
Help:
Where available in the menues, pressing the blue function
key will cause a help text to be displayed, pressing again will
remove the text from the screen.
Disposal advice
The packaging for your unit consists entirely of recyclable
material. Please sort the items appropriately, and sort them
for disposal via your local waste disposal system.
Please note that spent batteries (from the remote control) as
well as electronic components should not be disposed of in
your household refuse, but should be disposed of in accor-
dance with your local regulations (special waste, hand back
to outlet where purchased).
Safety advice
For your own protection, please read the safety instructions
carefully before commencing operation of your new unit.
The manufacturer accepts no responsibility for damage cau-
sed by inappropriate operation, or by non-compliance with
safety precautions.
> To ensure adequate ventilation, place the unit on a
smooth horizontal surface, and do not place any
objects on the upper surface of the unit. This surface
has ventilation slots that ensure heat can escape from
the interior of the unit.
> Do not place any burning objects, such as burning
candles, on top of the unit.
> Do not subject the unit to water spray or droplets, and
do not place any objects filled with liquuid, e.g. vases,
on top of the unit.
> The unit may only be operated in a temperate climate.
> Never open the unit housing! You are in danger of
receiving an electric shock. Any necessary repairs
should be carried out only by qualified service person-
nel.
In the following cases, you should disconnect the unit
from the mains power supply, and consult a qualified
technician:
> the mains cable or the mains plug are damaged
> the unit was exposed to liquid, or liquid has run into
the unit
> in case of significant malfunction
> in case of severe external damage
When not in operation
During an electrical storm, or when the unit will not be used
for a lengthy period of time (e.g. while you are on holiday),
disconnect the unit from the mains power supply.
9
10
Connecting the DVB receiver
to a satellite installation
a. Connect the LNC with the LNC input (LNC IN) of the
DVB receiver.
b. Establish a Scart connection between the DVB receiver
and the television set.
c. Connect a video recorder, using a Scart connection, to
the VCR Scart socket of the DVB receiver.
d. Connect the audio outputs to a Hi-fi set.
e. Mains power connection
VCR
a
e
c
d
b
Position A/Option B
> Use the arrow keys up/down to mark the satellite
you wish to receive at the DiSEqC setting Position
A/Option B and confirm by pressing OK. (Fig. 5-9)
Position B/Option B
> Use the arrow keys up/down to mark the satellite
you wish to receive at the DiSEqC setting Position
B/Option B and confirm by pressing OK. (Fig. 5-10)
In the next step, you should check on the correct configura-
tion of your antenna.
> If you wish to accept the settings entered, use the
arrow keys up/down to mark the field Yes, and
confirm by pressing OK. (Fig. 5-11)
Updating Software
When you have completed the antenna settings, the digital
receiver will check whether a new version of the operating
software is available via satellite. In case new software is
available, you can perform an automatic software update.
> Use the arrow keys left/right to select the field
Update, and confirm by pressing OK.
(Fig. 5-12) The new software for your unit will now be
downloaded. This procedure may take several minu-
tes.
Searching for programmes / ISIPRO
When checking whether new software is available for the
receiver, the system will also in addition check whether a new
ISIPRO programme list is available. If a new programme
list is available, this can be installed with the aid of the ISI-
PRO function.
> Use the arrow keys up/down to mark the line
ISIPRO programme list update. (Fig. 5-13)
> Confirm by pressing OK.
The current programme list will now be downloaded
via satellite. Please note any additional on-screen
messages, as well as the explanation at Point 8.5.3.
If no new ISIPRO programme list is available, or if you do not
wish to download this, please perform a programme scan in
order to find new programmes.
14
(Fig. 5-8)
(Fig. 5-9)
(Fig. 5-10)
(Fig. 5-11)
(Fig. 5-12)
… 14 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Technisat-Digit-MF4-S

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technisat Digit MF4 S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technisat Digit MF4 S in de taal/talen: Engels als bijlage per email.

De handleiding is 4,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info