Maintenance
The Maintenance menu shows the device name and the actual firmware
informations of your System.
In the Maintenance menu you can update
the system's firmware, reset the system to
factory defaults and backup your settings
including all entries of My Favorites list to
your USB/SD storage device.
License Info
You can read the License Info by pushing
the i button on the remote control.
Upgrade:
firmware (F/W) upgrade
● Download the new firmware from www.teac.de
● Copy the new firmware file from PC to your USB/SD storage device.
● Plug the USB/SD storage to a WAP USB/SD port. Wait until the USB/SD
device is recognized by WAP-R8900, the green dot appears on the USB/SD
symbol.
● Switch to Settings-Maintenance-Upgrade. The USB/SD files list appears.
● Scroll to the firmware file and select it from list by touching on the file name.
Now the system will check if this file is OK to upgrade and then bring up a
warning message.
● Confirm “YES” if you are sure to upgrade. Now the WAP-R8900 system will
start upgrade procedure.
ATTENTION: During the firmware upgrade, there must be no interruption of the
power supply! The USB/SD device from which the firmware is downloaded must
not be disconnected during the whole firmware upgrade procedure!
After the progress bar goes to 100%, system will reboot.
24