Reset
With this entry, the SMR can be reset to the factory defaults and then it returns to
Config mode (green/blue flashing LED). You will be prompted to confirm to reset the
system, for security reasons.
Attention: all Settings and the favorites will be erased by the reset!
Tip: before reset, proceed a USB backup of your settings.
Note: After the reset, the startup wizard will be available to guide you through the
basic settings.
Config.
With this button the current network settings will be erased and BRC and SMR
return to config mode. You will be prompted by a confirmation window, before
activating this function. If you have confirmed by “Yes“, you can configurate the
network settings again. Please refer the informations under Initial System Setup!
Attention: all Settings and the favorites will be erased by new configuration!
Reboot
With this button, the SMR will reboot. All settings and favorite stations are fully kept
unchanged!
Backup
With this item, you can backup all settings of your SMR in a file onto your USB
storage device and load back into your system if required.
This is a comfort feature e.g. to copy identical settings to a number of SMR devices.
Note: for this function, a USB device with free memory, connected to SMR, is
required!
BRC Setup
touch the BRC power button for more than 2 seconds. Then, the BRC settings
menu will show up.
In this menu, you will find functions (from
left to right) for device informations,
touchscreen calibration, search for and pair
with SMR devices, set the LCD brightness
automatic/manually, select/erase in the
SMR device list and setup other BRC
functions.
Almost all informations shown in your
BRC's display are transmitted from SMR
device to BRC, just before displaying, are
contents that are controlled by the SMR.
Just the changing from one SMR device to
another cannot be controlled by a SMR, the
BRC shall manage this – internally - on her own.
34
