585900
16
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
- The water fill-up opening must
not be left open while the iron is
being used.
- Never leave the appliance unat-
tended while in use.
- Never leave the appliance
connected and unattended if is
not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance into a
surface while in use.
- Do not use the appliance on any
part of the body of a person or
animal.
- Do not use the appliance to dry
textiles of any kind.
- CAUTION: Do not sleep while
using this appliance, as there is
risk you could be harmed.
- Turn the thermostat control to
the minimum (MIN) setting. This
does not mean that the iron is
switched off permanently.
Service:
- Make sure that the appliance
is serviced only by specialist
personnel, and that only original
spare parts or accessories are
used to replace existing parts/
accessories.
- Any misuse or failure to fo-
llow the instructions for use
renders the guarantee and the
manufacturer’s liability null and
void.
Instructions for use
Before use:
- Remove the appliance’s protective film.
- Make sure that all the product’s packaging has been
removed.
- Some parts of the appliance have been lightly greased.
Consequently, the first time the appliance is used a light
smoke may be detected.
- Prepare the appliance according to the function you
wish to use.
Filling with water:
- It is essential to have filled the deposit with water to be
able to work with steam.
- Open the lid of the filling mouth.
- Fill the deposit taking care to observe the MAX level
(Fig. 1)
- Close the lid of the filling mouth.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the desired temperature
position.
- Do not use temperatures higher than those indicated on
the garments to be treated.
• Temperature for synthetic fibres (Polyester, Nylon…).
• • Temperature for silk, wool.
• • • Temperature for cotton. (Minimum temperature for
steam ironing)
Max Temperature for linen.
- If garment has various kinds of fibres, select the tempe-
rature for the fibre that requires the lowest temperature.
(For example, select the temperature for polyester for an
article made out of 60% polyester and 40% cotton).
- Wait until the pilot light (F) has gone out which will
indicate that the appliance has reached an adequate
temperature.
- During use the pilot light (F) will automatically flash
on and off, thus indicating that the heating elements are
operating in order to maintain the desired temperature.
Dry ironing:
- The appliance has a steam flow regulator that permits
dry ironing (without steam) when placed in the 0 posi-
tion.
Steam Ironing:
- It is possible to iron with steam whenever the deposit
is filled with water and the adequate temperature is
selected.
Steam flow control:
- The appliance has a (C) control knob that allows to get
the control of the steam flow.
Spray:
- The spray can be used in both steam and dry ironing.
- Press the spray button ( A ) to use this operation.
- The spray button has to be pressed repeatedly to release
the first spray.
Manual Geysers.indb 16 26/06/12 16:17
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Taurus Geyser Titanium 2600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Taurus Geyser Titanium 2600 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info