617905
50
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
50 TASCAM HS-8
MONITOR button: Monitoring mix (same signal output
from the PHONES connector, which includes soloed
signals, etc.)
CHx NAME (button)
Edit the name of the channel (“x is the channel).
Use the
Shift
and
Caps
buttons to change the available
character types.
Follow the same procedures to enter names as in “Editing
the project name” on page 35, with the exception that
there is no “Date” button. A maximum of 4 characters are
allowed in channel names.
Channel settings (CHANNEL SETUP)
Make settings for each channel.
Select the channel using the tabs at the bottom of the
screen.
Ana x buttons (“x” indicates the channel number): Set
analog input channel 1-8 as the input source.
Ana x buttons (“x” is A or “B”): Set analog input channel
A/B as the input source.
AES x/ADAT x button (“x indicates the channel number):
Set AES/EBU digital input channel 1-8 or A/B or ADAT
input channel 1-8 as the input source.
DIGITAL SOURCE button: Touch this button to set digital
input as the input source and open the
CHx-x
DIGITAL
SOURCE
screen where you can select the
desired digital input connector.
REC button: Arm or disarm recording. When armed, the
button background becomes red. When recording,
the signals of tracks that are enabled are recorded.
Moreover, when a channel is armed for recording,
the signal from the assigned input connector is input
when the unit is stopped, recording or in recording
standby. (Default setting: disarmed—button not red)
INPUT MONITOR button: Use to turn input monitoring
ON/OFF. When ON for a channel, sound is always input
through its input connector.
Level knob: Touch the knob to adjust the level sent to the
stereo bus. When its background color turns yellow,
use the DATA dial to adjust it. Setting values range
from –∞ to +10 dB. (Default setting: 0 dB)
Pan pot: Touch the knob to adjust the stereo position of
the signal sent to the stereo bus. When its background
color turns yellow, use the DATA dial to adjust it.
Setting values range from L100 to R100 with C as the
center value. (Default setting: C)
Level meter: The input signal level is shown for a channel
when input monitoring is ON or recording is armed
and it is not being played back. The playback level is
shown during playback and for tracks that have input
monitoring OFF.
The area beneath each level meter shows the track
name (four characters or less) and indicates whether
recording and input monitoring are enabled.
Depending on whether or not recording and input
monitoring are enabled, the background color will
appear as follows.
REC Off REC On
MON Off
Black Red
MON On
Blue Red/blue
If the input source is set to a digital input and there
is no signal on the corresponding digital input or
the input signal differs from the unit setting, the
channel meter display appears gray and the following
messages appear. (The channels are indicated by
x-x
.)
Display Description
AESx-x
NO
SIGNAL
If there is no input signal
ADAT NO SIGNAL
AESx-x
UNLOCK
If the input signal is not
synchronized with the system
ADAT
UNLOCK
AESx-x
NOT AUDIO
If the Cbit information of the
input signal is not audio
AESx-x NOT
PRO
If the Cbit information of the
input signal is not professional
AESx-x
Cbit
ERROR
If other input signal Cbit
information differs from the
actual operation mode
Channel name button: Touch this button to edit the name
of the channel.
 button: Touch this button to open the next channel
setting screen.
6 – Internal Settings and Operations
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam HS-8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam HS-8 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info