617906
78
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
78
TASCAM HS-20
10 – Internal settings
o The mirror paired media is not present
(If the current media is not present, mirror recording
is also impossible.1)
o The CF card not set as the current media is not
compatible. (PIO mode)
(If the current media is not compatible, mirror
recording is also impossible.1)
o The non-current media is not in a compatible format.
(Not FAT16 or FAT32.) (If the format of the current
media is not compatible, mirror recording is also
impossible.1)
o The CF card is not compatible with UDMA.
o One or both of the media has not been formatted by
this unit.
(The media has not been formatted with the cluster
size recommended for this unit.)
o The recording sampling frequency is set to 88.2, 96,
176.4 or 192 kHz.
If any of these conditions apply, mirror recording is
not possible and recording will occur only on the
current media.
NOTE
When set to Mirror, the same folder as the current folder of
the current media will be created on the other media.
If you start recording with Mirror set, takes with the same
name will be recorded in the matching folders on both
media.
When set to Mirror, no recording will be possible if
the current media cannot be recorded to, even if the
non-current media has space available.
In Mirror recording mode, if the time counter display mode
is TOTAL REMAIN, the recordable time for the media with
less remaining space is shown.
If either media runs out of space during mirror recording,
the recordable time for the media that continues recording
will be shown.
8
Various messages
o If the REC Mode setting is changed to Mirror when Mirror
is unavailable, the following messages are shown.
1 One of the media cannot be recorded to
2 The CF card is not compatible with UDMA
3 One of the media has not been formatted by this unit
o If recording starts with Mirror unavailable, the following
messages are shown.
1 If the reason that Mirror is unavailable is anything other
than 2 and 3 below
2 The CF card is not compatible with UDMA
3 The CF card has not been formatted on this unit
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam HS-20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam HS-20 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info