617909
48
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
48
TASCAM DR-680MKII
9 – Other Settings and Information Display
GANG function
The GANG function allows you to adjust multiple channels
at the same time on the
TRIM
,
PAN
and
LEVEL
screens.
Set the range of channels to be ganged by pressing the
channel number (1–6) buttons for the channels at both
ends of the range at the same time.
For example, to gang channels 3–5, press the 3 and 5
buttons at the same time. When you do so, channels
3
-
5
will appear selected on the screen as shown in the
illustration below.
You can create multiple gangs of channels by setting each
gang separately. However, no channel can be part of more
than one gang.
When ganged, you can adjust parameters for the ganged
channels at the same time.
If the parameter setting for any of the ganged channels
reaches its maximum or minimum value, turning the
VALUE/MARK knob in the same direction will not further
increase or decrease the other channel parameters.
If you press and hold the VALUE/MARK knob while
multiple channels are selected, the parameter values for all
of the ganged channels will be set to the lowest value of
the channels.
Any of the following actions will deactivate the GANG
function.
Press any button that corresponds to a channel that is
currently ganged.
Put the unit power in standby.
Activate or Deactivate MS decoding.
Use the INITIALIZE function.
When using the GANG function, the ganged channels are
the same on the
TRIM
,
PAN
and
LEVEL
screens. However,
channels that have been set to use mid-side decoding
cannot be ganged or unganged on the
PAN
and
LEVEL
screens.
NOTE
You cannot gang channels that are set to use MS
decoding with channels that are not. However, you can
gang such channels separately.
You cannot gang channels that are set to use different
types of MS decoding.
When designating a range that includes multiple
channel pairs set to use MS decoding, only the
channels in the pair with the lowest number is ganged.
If only one of the channels in a pair set to use MS
decoding is included in the range, none of the channels
will be ganged together.
When dual recording is enabled, the GANG function
cannot be used. (See “Enabling dual recording” on
page 31.)
Output settings
You can make settings related to analog and digital output.
Analog output settings
You can set the LINE OUTPUT jacks to directly output the
sound of each track or to output the stereo mix sound.
When set to output the MIX, the left and right channels of
the stereo track are output through the analog output jack
1/2, 3/4 and 5/6 pairs.
1. Press the MENU button to open the
I/O
page of the
MENU
screen.
2. Use the DATA wheel to select the
LINE OUT
menu
item, and press the ENTER/MARK button.
3. Use the DATA wheel to set it to
1- 6
(default value) or
MIX x3
.
1- 6
: The sound of each channel is output directly.
MIX x3
: The stereo signal mixed by the internal mixer
is output.
4. When you have finished making the setting, press the
HOME/DISP button to return to the Home Screen.
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam DR-680MKII bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam DR-680MKII in de taal/talen: Engels als bijlage per email.

De handleiding is 2,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info