617895
71
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
TASCAM DP-24SD
71
14 – Troubleshooting
When working with this unit, if something is not going the way you want, or if you experience any difficulties, etc., first refer to this
troubleshooting section. It contains the most common troubles, the probable causes, and the corrective measures. Also, see “15 –
Messages” on page 72 for the meaning of messages that may pop up on the display. Consult this table when a message appears when
an operation cannot be completed by the unit.
The SD card is not recognized.
Confirm that the SD card is completely inserted.
Why can't I hear any sound when I play back?
Are the track faders of the tracks set to a proper level?
Is the STEREO fader set to a proper level?
Have you connected the PHONES or MONITOR OUT jack to
your monitoring system properly?
Is your monitoring system set up correctly?
Is the MONITOR LEVEL knob set to a proper level?
(PHONES jack only)
The sound I am trying to record sounds distorted.
Aren't the INPUT A to H TRIM knobs on the top panel of
the unit set too high?
Isn't the input source too loud?
Isn't the monitoring system distorted because the monitor
level is too high?
Why can't I record?
You must have at least one track in recording standby (REC
indicator flashing) before you start recording by pressing
the RECORD (0).
Are input sources assigned to tracks? (See Assigning inputs”
on page 35.)
Noise occurs if I connect a passive guitar or bass
directly.
Connecting another device to the unit's stereo output
(STEREO OUT) jacks might reduce the noise.
This might be caused by interference noise from another
device. If there is a power amplifier or other device that uses
a large transformer, a fluorescent light or something similar
nearby, you might be able to reduce the noise by changing
the distance and orientation of this unit in relation to such
equipment.
The unit turns off.
This product is compliant with the European ErP standby
power regulations. In order to comply with these
regulations, the automatic power saving function is set to
30 minutes when the unit is shipped from the factory. So, by
default, the unit will turn off automatically after 30 minutes
elapse without any operation. Change the automatic
power saving function setting if you want to disable it. (See
“Setting automatic power saving” on page 63.)
71

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Tascam-DP-24SD

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam DP-24SD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam DP-24SD in de taal/talen: Engels als bijlage per email.

De handleiding is 4,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info