617895
62
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
62
TASCAM DP-24SD
11 - Various Other Functions
Tuner function
You can use the built-in chromatic tuner to tune guitars.
1. Connect the guitar or bass guitar to the MIC/LINE INPUTS H
jack.
Tuning cannot be performed on instruments connected to
the MIC/LINE INPUTS A to G jacks.
2. Set the LINE-GUITAR switch on the rear panel to GUITAR .
(See “Selecting the input sources” on page 35.)
3. When the recorder is stopped, press the MENU button to
open the
MENU
screen.
4. Use the JOG/DATA dial to select the
TUNER
menu item and
then press the F4 (t) button.
The
TUNER
screen appears.
5. Use the JOG/DATA dial or the CURSOR (5/b) buttons to
set the A4 (La) standard frequency.
The setting range is from
435Hz
to
445Hz
. (Default:
440Hz
)
6. Play the instrument and begin tuning.
The pitch name closest to the string appears above the
meters.
Tune the instrument so that the target pitch name appears
and the center of the tuning meter lights.
A bar appears on the left or right of the center if the sound
is lower or higher than the target pitch. The bar becomes
longer as the sound shifts away from the target pitch.
When the pitch played matches the note shown, the center "
", "t" and "g" lights green.
7. After tuning the instrument, press the HOME button to
return to the Home screen.
NOTE
The following buttons can be controlled in the Tuner mode.
INPUT TRIM (Analog)
JOG/DATA dial (Calibration)
Monitor level
Setup (PREFERENCE)
You can use the
PREFERENCE
screen to change various
settings to optimize the unit for your use environment and other
requirements, as well as to restore the factory settings.
The PREFERENCE menu allows you to customize the unit to your
preference.
Follow the procedure below to open the
PREFERENCE
screen.
1. When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select
PREFERENCE
, and then press the F4
(t) button.
The
PREFERENCE
screen appears.
3. On the
PREFERENCE
screen, use the CURSOR (5/b)
buttons to select a parameter, and then use the JOG/DATA
dial to change its setting.
Auto Power Save(Set automatic power saving)
Contrast (LCD adjustment)
Brightness (LCD adjustment)
Backlight (LCD adjustment)
Foot SW Right (Foot switch R assignment)
Foot SW Center (Foot switch C assignment)
Foot SW Left (Foot switch L assignment)
Undo History (Switch over between level 1 and level 10)
Jump Back (Jump time setting)
Auto Monitor (Auto Monitor setting)
Preview Time (Preview time setting)
Peak Hold(Set peak hold time)
Song Name Type (Switching between DATE and WORD)
Date/Time (System time/date setting)
Initialize (Factory setting reset)
62

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Tascam-DP-24SD

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam DP-24SD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam DP-24SD in de taal/talen: Engels als bijlage per email.

De handleiding is 4,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info