617901
17
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
TASCAM DA-6400/DA-6400dp
17
3 – Preparation
Installing an SSD/HDD drive in the
case
1. While pressing the cover lock on the left side of the
SSD/HDD case handle, slide the lower cover toward the
connector and remove it.
2. While pressing the cover lock on the right side of the
SSD/HDD case handle, slide the upper cover toward the
connector and remove it.
3. Place the SSD/HDD drive in the top of the case, and attach it
to the connector at the handle end.
4. Attach the set SSD/HDD drive with screws through the
bottom of the case.
5. While pressing the cover lock part of the SSD/HDD case,
slide the lower and upper covers from the connector end to
attach them.
CAUTION
Be careful not to squeeze parts near the handle when
attaching the upper and lower covers.
Loading and removing SSD/HDD cases
Loading an SSD/HDD case
Insert the SSD/HDD case into the SSD/HDD SLOT on the front of
the unit until they are even.
CAUTION
Before inserting the SSD/HDD case into the main unit,
remove the static electricity protection cover from the SSD/
HDD case main unit connector.
Static electricity
protection cover
NOTE
If you are unable to insert the SSD/HDD case properly, try
removing it once and reinserting it.
You can insert a case even when the unit is on.
Removing an SSD/HDD case
SSD/HDD cases can be ejected.
CAUTION
Do not remove the SSD/HDD case from the unit when the
SSD/HDD is being accessed (during recording, playback,
when data is being written or at other times when the
SSD/HDD case indicator is blinking orange). Removing a
case when its drive is being accessed could cause proper
recording to fail, recorded data to be lost, and sudden loud
noises from monitoring equipment, which might damage
the equipment or harm hearing.
NOTE
You can remove the SSD/HDD case from the unit even when
the unit is on as long as the SSD/HDD is not being accessed
(during recording, playback, when data is being written or
at other times when the SSD/HDD case indicator is blinking
orange).
1. Slide the RELEASE switch toward >.
This unlocks the loaded SSD/HDD case so that it can be
removed.
2. While sliding the RELEASE switch toward >, grasp the
SDD/HDD case by hand and pull it out.
CAUTION
After removing the SSD/HDD case from the main unit,
attach the static electricity protection cover to the SSD/HDD
case main unit connector.
Static electricity
protection cover
Using the security screw
You can use the included security screw kit to lock the SDD/HDD
case so that cannot be removed.
Use a Phillips (+) driver to install/remove the security screw.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam DA-6400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam DA-6400 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info