490774
28
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
28 TASCAM CD-A550/CD-A750
5 – Playing Back CDs
In program input mode, the total program time and the
number of programmed tracks is shown on the display.
(However, the total program time is not shown for data
CDs.) When no tracks have been added to the program,
0:00/00
is shown.
Program input mode can be activated by selecting the
PROGRAM EDIT item from the menu. (See “Using the
menu” on page 17 for details about using the menu.)
2 Use the numeric keys or the SKIP Â/¯ keys to
select a track to add as program step 01.
When using the numeric keys, input the leftmost digit
first.
[Audio CD]
[Data CD]
When using a data CD, if you do not press the numeric
keys or the SKIP Â/¯ keys for a second, the display
switches from showing the track number to showing the
file name.
3 Press the ENTER key to add the selected track to the
program and return to program input mode, which
allows you to add the next program step.
4 Repeat steps 2 and 3 above to add as many tracks as
you desire in order.
5 When finished program setting, to exit program
input mode, press the ENTER key or the PROGRAM
EDIT key to return to the standard display.
Pause program
You can set the program to pause by entering “0” for a
track number using the numeric keys. During programmed
playback, when the program reaches a step set to pause, the
unit’s CD player pauses. You must press the
CD PLAY
key
to advance to the next program step.
The same track can be added to the program mul-
tiple times.
Press the remote control CLEAR key to remove the
last added track from the program.
Press the CD STOP key to remove all tracks from the
program.
The program can have a maximum of 99 tracks. If
you try to add more than 99 tracks, the “PGM Full!”
error message appears on the display.
If the total playback time of the programmed tracks
exceeds 999 minutes and 59 seconds : – is
shown on the display.
You cannot add a pause as the final program step.
You cannot add a pause that would result in two
consecutive pauses.
In program input mode, use the –/+ keys to change
program steps and confirm their contents.
Programmed playback mode and the program set-
tings are retained even if the power is turned OFF.
In programmed playback mode, playback is impos-
sible if no tracks have been added to the program.
Clearing the entire program
In addition to pressing the
CD STOP
key to clear the entire
program in program input mode, as described above, all the
following actions also clear the entire program.
Opening the disc tray
Turning the folder playback function ON or OFF
Changing the playback mode
Changing the folder
Checking the program
You can check the contents of the program.
1 Press the PROGRAM EDIT key on the remote control
to put the unit into program setting mode.
2 Press the /+ keys to cycle through the program
steps shown on the display, starting at the first.
Pressing the key cycles through the tracks in the
program in reverse order from the last added step.
Editing the program
You can edit a program that has already been created.
1 Press the remote control PROGRAM EDIT key to put
the unit into program input mode.
2 Use the /+ keys to select the program step that you
want to edit.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam CD-A750 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam CD-A750 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info