• The power doesn’t turn on.
Insert 2 new size AAA (“R03” or “24F” ) batteries. Be sure that the polarity of the batteries is set
properly.
• “Err6” or “Err7” appears on the display.
The scale needs to be repaired. Please contact your retailer.
Press ON/TARE.
Place a bowl on
the tray.
Press ON/TARE
to subtract the
weight of the
bowl.
Place the
material to be
weighed.
After removing the bowl, the display will
show a negative reading or “-----”. Press
the ON/TARE button to return the display
to “0”. Press OFF to turn off.
◆Weighing/TARE function
If the weight of the item(s) exceeds the scale’s capacity, “EEEE” will appear on the
display. Make sure you place item(s) in the center of the tray.
◆Mode change
◆Automatic power off
◆Battery replacement
When the power is ON, press OFF button while pressing ON/TARE button, select the
proper mode. (for the g/oz version)
The scale is designed with an auto power-off function for energy efficiency. If the same
reading is displayed for more than 10 minutes the scale will automatically turn off.
If “Lo” appears in the display when attempting to weigh, replace the battery. (following
previous instructions)
Trouble shooting
Specification
g version g/oz version
Capacity 3000 g 3000 g/105 oz
Minimum graduation 1 g 1 g/0.05 oz
◆Inserting photographs or patterns etc.
Unlock the lock. Remove the clear
cover.
Place the
photograph
or pattern on
the tray in line
with the guides
(points).
Align the clear
cover with the
bottom of the
tray, and gently
place the clear
cover back on
the tray.
Lock the lock.
Double-sided tape can be used to hold
the photograph or pattern in place.
To cover the entire surface of the tray
with a photograph or pattern, cut the
photograph or pattern to the same size
as the paper that was included with the
scale. (max. 5 in × 4.7 in)
g version
oz version
