GB
17
GB
16
How to Use the Scale
Extended Display Function
When the key is pressed while the
display is on hold, the weight is displayed
1g units for as long as the key remains
pressed.
* The extended display function cannot be used if
“Weight Lock Mode” is off
, or if the
“RECALL” or “WEIGHT GAIN” is displayed.
Keep pressing
By releasing the key simultaneously
return to the previous display.
4
After measurement, remove
the baby from the baby
basket.
If the “Hold Time” has been set, the
measurement remains on display for
the set time (see P.22). The display can
b
e reset to
g
a
t any time by
pressing the key.
s
When tare is not specified
Press the key to turn on
the power.
(Beep sound)
After flashing the display,
g
i
s
displayed.
1
3
Place the baby on the baby basket.
Once the scale stabilizes and the weight is con-
firmed, “S
TABILIZED (
"
)
” and “W
EIGHT
LOCK (
t
)” is shown. (Beep sound)
2
Press the key to set
the “Weight Lock Mode”.
“Weight Lock Mode (
t
)” is shown.
Measurement instructions
•A warning sound beeps if a baby is
placed on the basket before
g
i
s displayed.
If it happens, remove the baby from
the basket.
Release
Note
•When the load exceeds 6000 g the pointer besides the "5 g" mark appears.
Caution
•The value displayed is for information only. The scale cannot be used to certify
weight. For this reason, values cannot be output to the RS interface.
Tare weighing function
After turning on the power, the bath towel, diaper/nappy, blanket etc. is
deducted by pr
essing key. Then, the baby’s actual (i.e. net) weight
(excluding the weight of the towel, diaper, etc.) can be measured.
1
Press the key to turn on
the power.
(Beep sound)
After flashing the display,
g
is displayed.
2
Press the key to set
the “Weight Lock Mode”.
“Weight Lock Mode (
t
)” is shown.
