12
Memory Card Quick Installation
This option is only available to you if your navigation system is equipped with a prepared memory
card. In this
case, you will ready be able to use the Navigation function of your device after a short time,
without carrying out the pre-installation on a PC.
● The initial setting up must be carried out as described
● The following installation limits the Navigation to the area which is pre-installed on your
memory card.
You must carry out these steps to put the navigation into operation in your car:
1. Read and adhere to the safety instructions.
2.Install the remaining components of the navigation system.
3.Press the Sleep/Wake up button to start your navigation system. If the instructions of Step1
have not yet been executed, then do it now. The battery should be charged. The
accumulator will be charged by means of the car power supply if necessary.
●
Insert the pre-installed memory card in the navigation system. The installation of the
navigation software will start automatically. Follow the instructions on the screen.
NOTES:
● The memory card must always be inserted into the device during the
● use of the navigation system. A Soft Reset will have to be carried out to restart the navigation
system, if the memory card is removed during its use, even for a short time.
Set the date and time by means of the Settings button and the date/time control button, if this has
not yet taken place. Set the applicable time zone, if available.
Staring Navigation
1. Press the Sleep/Wake up button for about two seconds to wake up your navigation system
2. The navigation software will start automatically or after clicking on the navigation control
button, according to the version.
3. Press the menu icon to enter the destination and the address of your navigation destination.
Then start the navigation by clicking on Navigate. YOU will receive the rout information on the
screen, augmented by language statements, after a short time, if the satellite reception is
adequate.
Please take information about the further operation of the Navigation software from the
comprehensive User Handbook on the Navigation CD. In addition, brief help is available to
you on your navigation system. You will reach it by means of the Options/Destination Entry icon
and by selecting the help function.
Note: The GPS-receiver will require some minutes for initialization when deployed for the first
time. Even when GPs signal reception is indicated the navigation could be imprecise. In all future
instances it will take about 30-150 seconds until a correct GPS-signal is available, sufficient
“sight” of the satellite is a prerequisite.