hOW TO uSe The inTerval-Timing funCTiOn
You can activate the chronograph using button A. If you wish
to temporarily stop the time, press button B. The time has now
been deactivated but continues to run in the background. If you
would like to continue using the stopwatch function, press button
B again – the hands will now display the correct time, which was
running in the background all along. You can repeat this action
as often as necessary. Press button A to stop the time – the nal
time will now be displayed.
If you press button B next, the chronograph will be reset and all
hands will return to the (0) position.
If the hands of the chronograph do not return to the (0) position
after you have reset the chronograph or replaced the battery,
please complete the following steps: pull out the crown to the
2nd position. Press buttons A and B simultaneously for at least
2 seconds – this will activate the corrective mode. You can now
adjust the hands. Use button A to adjust the large second hand
(1), the 1/10th second hand (2) and the minute hand (3). You
can use button B to select one of these hands. Once the hands
have returned to the (0) position, push the crown back to its
normal position and screw the crown clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
out the crown to the 1st or 2nd position.
Style chronograph models.
push the crown back to its normal position.
and 59 seconds.
