- 25-
Auth Domain: Enter the domain name of authentication server. It's only required
when the address of Auth Server is a server name.
Auth Mode: You can select the proper Active mode according to your need.
Manual: Select this option to manually activate or terminate
the Internet connection by the <Connect> or <Disconnect>
button. It is optimum for the dial-up connection charged on
time.
Always-on: Select this option to keep the connection always
on. The connection can be re-
established automatically
when it is down.
MTU: MT
U (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1500. The default MTU is 1500.
Bandwidth:
Specify the Upstream/Downstream Bandwidth for the port. To
make "Load Balance" and "Bandwidth Control" take effect, please
set these parameters correctly.
BigPond Status
Status: Displays the status of BigPond connection.
“Disabled” indicates that the BigPond connection type is not
applied.
“Connecting” indicates that the r
outer is obtaining the IP
parameters from your ISP.
“Connected” indicates that the router has successfully obtained
the IP parameters from your ISP.
“Disconnected” indicates that the connection has been manually
terminated or the request of the router has no response from
your ISP. Please ensure that your settings are correct and your
network is connected well. Consult your ISP if this problem
remains.
IP Address: Displays the IP address assigned by your ISP.
