772854
60
Verklein
Vergroot
Pagina terug
1/83
Pagina verder
REV1.0.0 1910012033
User Guide
AC1900 Wireless Dual Band DOCSIS 3.0
Cable Modem Router
CR1900
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 1. Get to Know Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . .2
1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. Product Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. 1. Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. 2. Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2. Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2. 1. Position Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. 2. Connect Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. 3. Activate Your Modem Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 3. Log In to Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 4. Congure Internet Connections. . . . . . . . . . . . . . . . . . . . . . . . 13
4. 1. Set Up an IPv6 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. 2. Test Internet Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. 3. Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 5. Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. 1. Use Firewall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. 2. View Log Locally or Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. 3. Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. 4. IP & MAC Binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 6. USB Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6. 1. Local Storage Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6. 1. 1. Access the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6. 1. 2. Customize Your Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6. 2. Remote Access via FTP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6. 2. 1. Access the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6. 2. 2. Customize Your Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6. 3. Media Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6. 3. 1. Access the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6. 3. 2. Customize Your Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6. 4. Printer Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 7. Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Chapter 8. Guest Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
8. 1. Create a Network for Guests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
8. 2. Customize Guest Network Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Chapter 9. NAT Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
9. 1. Share Local Resources over the Internet by Virtual Servers. . . . . . . . . . . . . . . . . . 49
9. 2. Open Ports Dynamically by Port Triggering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
9. 3. Free Applications from Port Restriction by DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
9. 4. Translate Address and Port by ALG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Chapter 10. Specify Your Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . 55
10. 1. Internet Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
10. 2. LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
10. 2. 1. Change the LAN IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
10. 2. 2. Use the Modem Router as a DHCP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . 57
10. 3. Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10. 3. 1. Specify Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10. 3. 2. Use WPS for Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
10. 3. 3. View Wireless Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
10. 3. 4. Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
10. 4. Set Up a Dynamic DNS Service Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Chapter 11. Administrate Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
11. 1. View Basic Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
11. 1. 1. View System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
11. 1. 2. View Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
11. 1. 3. View Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
11. 2. Set System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
11. 3. Back Up and Restore Conguration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
11. 4. Change the Administrator Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
11. 5. Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
11. 6. System Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
1
About This Guide
This guide is a complement to Quick Installation Guide. The Quick Installation Guide
instructs you on quick Internet setup, and this guide provides details of each function
and shows you the way to configure these functions appropriate to your needs.
When using this guide, please notice that features of the router may vary slightly
depending on the model and software version you have, and on your location, language,
and Internet service provider. All screenshots, images, parameters and descriptions
documented in this guide are used for demonstration only.
Conventions
In this guide, the following conventions are used:
Convention Description
Teal Underlined Hyperlinks are in teal and underlined. You can click to redirect to a website
or a specific section.
Teal Contents to be emphasized and texts on the web page are in teal, including
the menus, items, buttons, etc.
>
The menu structures to show the path to load the corresponding page.
For example, Advanced > Wireless 2.4GHz > MAC Filtering means the MAC
Filtering function page is under the Wireless 2.4GHz menu that is located in
the Advanced tab.
Note: Ignoring this type of note might result in a malfunction or damage to the
device.
Tips: Indicates important information that helps you make better use of your
device.
Symbols on
the web page
click to edit the corresponding entry.
click to delete the corresponding entry.
click to enable or disable the corresponding entry.
More Info
The latest software, management app and utility can be found at Download Center at
http://www.tp-link.com/support.
The Quick Installation Guide (QIG) can be found where you find this guide or inside the
package of the router.
Specifications can be found on the product page at http://www.tp-link.com.
A Technical Support Forum is provided for you to discuss our products at
http://forum.tp-link.com.
Our Technical Support contact information can be found at the Contact Technical
Support page at http://www.tp-link.com/support.
Chapter 1
Get to Know Your Modem
Router
This chapter introduces the modem router and shows its appearance.
This chapter contains the following sections:
Product Overview
Product Appearance
3
Chapter 1 Get to Know Your Modem Router
1. 1. Product Overview
TP-Link’s Cable Modem Router is a combined wired/wireless network connection
device with integrated wireless router and DOCSIS 3.0 modem, reducing hassle of
configuration and saving space.
With Ethernet ports and antennas, the modem router provides wired and wireless
access for multiple computers and mobile devices.
With various features and functions, the modem router is the perfect hub of your home
or business network.
1. 2. Product Appearance
1. 2. 1. Front Panel
The front panel provides LEDs. You can check the modem router’s working status by
following the LED Explanation table.
LED Status Indication
Power
On Power is on.
Off Power is off. Please ensure that the power adapter is
connected correctly.
4
Chapter 1 Get to Know Your Modem Router
LED Status Indication
Downstream
Green The modem router has synchronized more than one
channel.
White The modem router has synchronized one channel.
Flashing The modem router is scanning for downstream channels.
Off The synchronization has not started or has failed. Please
refer to Note 1 for troubleshooting.
Upstream
Green The modem router has synchronized more than one
channel.
White The modem router has synchronized one channel.
Flashing The modem router is synchronizing upstream channels.
Off The initialization has not started or has failed. Please
refer to Note 1 for troubleshooting.
Internet
On The modem router is connected to the internet.
Off There is no internet connection. Please refer to Note 2 for
troubleshooting.
Flashing The modem router is starting up.
LAN
On At least one LAN port is connected to a powered-on
device.
Off No LAN port is connected to a powered-on device.
USB
On The inserted USB device is ready to use.
Off No USB device is plugged into the USB port.
Flashing A USB device is being identified.
Wireless
On The Wireless function is enabled.
Off The Wireless function is disabled.
WPS
On A wireless device has been successfully added to the
network by WPS.
Flashing
A wireless device is trying to connect to the network
by WPS. This process may take up to 2 minutes. Please
press the WPS button on the wireless devices that you
want to add to the network while the LED is flashing.
Off
A WPS connection has been established for more than
5 minutes or a wireless device has failed to be added to
the network by WPS.
Note:
1. If the Downstream LED or Upstream LED is off, check your internet connection first. Refer to Connect Your Modem
Router for more information about how to make internet connection correctly. If you have already made a right
connection, contact your ISP to make sure your internet service is available now.
5
Chapter 1 Get to Know Your Modem Router
2. If the Internet LED is off, check your Downstream LED and Upstream LED first. If they are also off, please refer to Note
1. If the Downstream LED and Upstream LED are on, check your internet configuration. You may need to check this
part of information with your ISP and make sure everything has been input correctly.
1. 2. 2. Back Panel
The back panel provides buttons and connection ports. Refer to the following for
detailed instructions.
Item Description
Reset Button
With the modem router powered on, use a pin to press and hold the
Reset button for at least 8 seconds until all LEDs turn back on, then
release the button. And the modem router will restore to its factory
default settings.
WPS Button Press to start a WPS synchronization.
Wi-Fi ON/OFF
Button Press to turn the Wi-Fi on or off.
USB1 and USB2
Ports For connecting to USB storage devices or USB printers.
LAN1, LAN2, LAN3,
and LAN4 Ports For connecting to your PCs or other Ethernet network devices.
Cable Port For connecting to a coaxial cable.
6
Chapter 1 Get to Know Your Modem Router
Item Description
DC Port For connecting the modem router to power socket via the provided
power adapter.
Power On/Off
Button Press to power on or off the modem router.
Chapter 2
Quick Start
This chapter contains the following sections:
Position Your Modem Router
Connect Your Modem Router
Activate Your Modem Router
8
Chapter 2 Quick Start
2. 1. Position Your Modem Router
With the modem router, you can access your network from anywhere within the wireless
network coverage. However, the wireless signal strength and coverage vary depending
on the actual environment of your modem router. Many obstacles may limit the range of
the wireless signal, for example, concrete structures or thick walls.
For your safety and best Wi-Fi performance, please:
Do Not locate the modem router in the place where it will be exposed to moisture or
excessive heat.
Keep away from the strong electromagnetic radiation and the device of
electromagnetic sensitive.
Place the modem router where it can be connected to the various devices as well as
to a power source.
Make sure the cables and power cord are safely placed out of the way to avoid a
tripping hazard.
Tips: The modem router can be placed on a shelf or desktop.
2. 2. Connect Your Modem Router
Before connecting the device, please make sure your broadband cable service provided
by your ISP is available. If there is any problem, please contact your ISP. Also, keep your
hands dry during connection. Follow the steps below to connect your modem router.
1. Connect the coaxial cable and power adapter to the modem router, then power on
your modem router.
Internet
Coaxial cablePower adapter
9
Chapter 2 Quick Start
2. Wait for about 1 minute until the following LEDs are solid on.
3. Connect your computer to the modem router.
Method 1: Wired
Connect your computer’s Ethernet port to a LAN port on the modem router via an
Ethernet cable.
Method 2: Wireless
Connect wirelessly by using the default SSID (Wireless Network Name) and Wireless
Password printed on the Information Card or the product label of the modem router.
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Also, the WPS function
will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured
with the appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device’s screen.
2 ) Immediately press the WPS button on your modem router.
3 ) The WPS LED flashes for about two minutes during the WPS process.
4 ) When the WPS LED is on, the client device has successfully connected to the
modem router.
WLAN
On
TP-Link
YSL
David
Hotdog
Ts_5G
Sunny
Test
10
Chapter 2 Quick Start
2. 3. Activate Your Modem Router
1. Get your internet service account information and the modem router’s Information
Card ready.
Serial Number
MAC Address
Wi-Fi Password/PIN
SSID
Information Card
2. Make sure your computer is set to dynamically obtain an IP address. If not, refer to
Appendix: Troubleshooting for instructions.
3. Launch a web browser, and visit any website. You will be automatically redirected to
your service provider’s self-activation page.
4. Follow the on-screen instructions to activate the modem router.
If you have any problem activating your modem router, please contact your Internet
Service Provider (ISP).
Contact information of major cable ISPs:
Xfinity by Comcast: Check your bill for the support number
Spectrum: 1-855-757-7328
Cox: 1-800-234-3993
The listed contact information may change. You can also find the contact information in
your monthly internet service billing statement.
5. After activating your modem router successfully, wait for about 10 minutes till these
LEDs become solid on, then you can enjoy the internet.
Note:
1. If you are unable to access the internet, refer to Appendix: Troubleshooting > T4 for instructions.
2. The product should be connected to cable distribution system that grounded (earthed) in accordance with ANSI/
NFPA 70, the National Electrical Code (NEC), in particular Section 820.93 - Grounding of Outer Conductive Shield of
a Coaxial Cable.
Chapter 3
Log In to Your Modem
Router
12
Chapter 3 Log In to Your Modem Router
With a web management page, it is easy to configure and manage the modem router.
The web management page can be used on any Windows, Macintosh or UNIX OS with a
web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log in to your modem router.
1. If the TCP/IP Protocol on your computer is set to the static (fixed) IP address,
you need to change it to obtain an IP address automatically. Refer to Appendix:
Troubleshooting > T7 to configure your computer.
2. Launch a web browser and go to http://tplinkmodem.net or http://192.168.1.1. Set
a strong password using 1-15 characters and click Save.
Note: If the login page does not appear, please refer to Appendix: Troubleshooting > T3.
3. Enter the password you set and click Log in.
Note: For subsequent logins, use the password that you have created.
Chapter 4
Configure Internet
Connections
This chapter introduces how to manually configure your internet settings. Furthermore,
you can also set up an IPv6 connection if your ISP provides IPv6 service.
This chapter includes the following sections:
Set Up an IPv6 Connection
Test Internet Connectivity
Operation Modes
14
Chapter 4 Congure Internet Connections
4. 1. Set Up an IPv6 Connection
If your ISP has provided a line that supports IPv6 connection as well as some detailed
IPv6 parameters, you can manually set up an IPv6 connection.
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an internet connection by referring to Quick Start before
setting up an IPv6 connection.
2. Visit http://tplinkmodem.net, and log in with the password you set for the router.
3. Go to Advanced > Network > IPv6 LAN Settings. In the DHCPv6 Server section,
configure the following parameters provided by your ISP.
DHCPv6 Server: Select the checkbox to enable DHCPv6 server.
Starting IP Address: Enter a value for the DHCPv6 server to start with when issuing IP
addresses.
Number of Addresses: Enter a value between 0-255 for DHCPv6 server preference.
The default value is 255.
Address Lease Time: The Address Lease Time is the amount of time in which a network
user will be allowed connection to the modem router with their current dynamic
IP address. Enter the amount of time, in seconds, then the user will be assigned
this dynamic IP address. After the dynamic IP address is expired, the user will be
automatically assigned a new dynamic IP address. The default is 3600 seconds.
Rapid Commit: Select the checkbox to enable the prefix fast distribution function.
Unicast: Select the checkbox to enable the unicast function. The default setting is
disabled.
15
Chapter 4 Congure Internet Connections
Stateless DHCPv6: Stateless DHCPv6 is a combination of “Stateless Address
Autoconfiguration” and “Dynamic Host Configuration Protocol for IPv6” and is
specified by RFC3736. Select the checkbox to enable this function.
4. Click Save to make the settings effective. Now IPv6 service is available for your
network.
4. 2. Test Internet Connectivity
After manually setting up an internet connection, you need to test the internet
connectivity. The modem router provides two diagnostic tools to help you locate the
malfunction.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > System Tools > Diagnostics.
3. Select Ping or Traceroute as the diagnostic tool and enter the parameter according
to your needs.
Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
IP Address/Domain Name: Enter the IP Address/Domain Name that you want
to ping.
Enter the optional parameters in the Advanced section:
Ping Count: Enter the number of times you want to ping the target device.
Ping Packet Size: Enter the size of the ping packet you want to use.
16
Chapter 4 Congure Internet Connections
Ping Timeout: Enter the time period when the ping times out.
Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an internet
protocol network.
IP Address/Domain Name: Enter the IP Address/Domain Name you want to
trace.
Enter the optional parameter in the Advanced section:
Traceroute Max TTL: Enter the maximum number of hops (to be reached).
4. Click Start to check the connectivity of the internet. The page will display the result
of diagnosis.
4. 3. Operation Modes
The modem router supports two operation modes: Router Mode and Bridge Mode. The
modem router uses the Router Mode by default, and it shares internet wirelessly over
the crystal clear 5GHz band and 2.4GHz band.
You can also use the Bridge mode. In this mode, the modem router can be configured to
act as a bridging device between your LAN and your ISP. Bridges are devices that enable
two or more networks to communicate as if they are two segments of the same physical
LAN. If you were in Bridge Mode, change the computer settings to obtain an IP address
automatically. You could then log in to the web management page at 192.168.100.1.
Chapter 5
Network Security
This chapter guides you on how to protect your home network from unauthorized
users by implementing the following network security functions. You can block certain
data from getting through your network, control certain client devices’ access to the
internet, view log events locally or remotely, and let a certain device use an IP address
exclusively.
Use Firewall
View Log Locally or Remotely
Access Control
IP & MAC Binding
18
Chapter 5 Network Security
5. 1. Use Firewall
You can detect certain attacks with some firewall features and block certain data from
getting through your network with different protection levels.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Firewall.
3. Configure the basic firewall settings according to the following explanations:
Firewall Protection: Select the checkbox to enable Firewall Protection. It is
recommended that you keep this feature enabled.
Protection Level: Select the firewall protection level appropriate to your needs. All the
allowed services will be shown in the Allow Services section according to the firewall
protection level you select.
Block Fragmented IP Packets: This feature helps to protect your private local network
against fragmented IP packets from flooding the network with server requests. Select
the checkbox to enable this feature.
Port Scan Detection: This feature can protect your private local network from internet
based hackers who attempt to gain unsolicited access to your network by detecting
open IP ports on your gateway. Select the checkbox to enable this feature. You can
check details of detection on the Firewall Log page.
DoS Protection: This feature can protect your private local network against DoS
(denial of service) attacks from flooding the network with server requests. Select the
checkbox to enable this feature.
4. Click Save.
19
Chapter 5 Network Security
5. 2. View Log Locally or Remotely
Firewall Log records events that you want the router to record. You can also send the
log to an email and analyze it as long as you have access to the email.
¾To record certain events:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Firewall Log and focus on the Log Events section.
3. Select the checkbox to record the corresponding events in the router.
¾To view log locally:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Firewall Log. The Local Log table displays details of
the recorded log.
Tips: Click Clear Log to delete all the log.
¾To email local log:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Firewall Log and focus on the Email Log section.
20
Chapter 5 Network Security
3. Enter your email address in the Contact Email Address field.
4. Enter the name of your SMTP sever in the SMTP Server Name field.
5. Enter the default admin/admin or specify new username and password in the SMTP
Username and SMTP Password fields.
6. If you want the router to send you the log regularly, enable Auto Mail. Specify how
often the router sends the log, either once every day or once every several hours.
7. Click Save.
8. Click Email Log in the Local Log section to send the log immediately.
5. 3. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkmodem.net, and log in with the password
you set for the router.
2. Go to Advanced > Security > Access Control and enable
Access Control.
I want to:
How can I
do that?
21
Chapter 5 Network Security
3. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist and click Save.
2 ) Select the device(s) to be blocked in the Online Devices
table.
3 ) Click Block above the Online Devices table. The selected
devices will be added to Devices in Blacklist automatically.
To allow specific device(s)
1 ) Select Whitelist and click Save.
2 ) Click Add.
22
Chapter 5 Network Security
3 ) Enter the Device Name and MAC Address. You can copy
and paste the information from the Online Devices table
if the device is connected to your network.
4 ) Select Enable This Entry.
5 ) Click OK.
Now you can block or allow specific client devices to access your
network (via wired or wireless) using the Blacklist or Whitelist.
5. 4. IP & MAC Binding
IP & MAC Binding enables you to bind a specific IP address to your network device’s MAC
address, and is also known as Address Resolution Protocol (ARP) Binding. It protects
your home network from ARP Spoofing, one kind of ARP attacks. By ARP Spoofing, an
attacker can modify and even stop your internet traffic. ARP Spoofing is often followed
by more serious cyber attacks. When you bind an IP address to your network device,
it has exclusive use of the IP address. The attacking device deliberately associating
its MAC address with the bound IP address is denied from accessing your network. To
keep your home network safe from ARP Spoofing, you can rely on IP & MAC Binding.
Prevent ARP spoofing.
1. Visit http://tplinkmodem.net, and log in with the password
you set for the router.
2. Go to Advanced > Security > IP & MAC Binding and enable IP
& MAC Binding.
3. Bind your device(s) according to your needs.
Done!
I want to:
How can I
do that?
23
Chapter 5 Network Security
To bind the connected device(s)
1 ) Select the device(s) to be bound in the ARP List.
2 ) Click Bind to add to the Binding List.
To bind the unconnected device
1 ) Click Add.
2 ) Enter the MAC address and IP address that you want to
bind. If you don’t know your device’s MAC address, you
can use the Network Map (Basic > Network Map) to help
find it.
3 ) Select Enable This Entry and click Save.
Note:
1. To keep the IP & MAC Binding entries effective all the time, it is recommended
to use Address Reservation (Advanced > Network > LAN Settings) to
reserve the bound IP address to your device or set your device to the bound
IP address.
2. Your device has exclusive use of the IP address bound to its MAC address.
If you want to bind several IP addresses to your device's MAC address, just
add more binding entries.
Now you don’t need to worry about ARP spoofing.
Done!
Chapter 6
USB Settings
This chapter describes how to share and access USB devices connected to the modem
router among different clients.
The modem router supports USB external flash drives, hard drives and USB printers.
This chapter contains the following sections:
Local Storage Sharing
Remote Access via FTP Server
Media Sharing
Printer Sharing
25
Chapter 6 USB Settings
6. 1. Local Storage Sharing
Share your USB storage devices with different users on the network.
6. 1. 1. Access the USB Disk
1. Connect Your USB Disk
Insert your USB storage device into the modem router’s USB port directly or using
a USB cable. Wait several seconds until the USB LED becomes solid on.
Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the modem router.
If the USB storage device requires using bundled external power, make sure the external power has been
connected.
If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
Before you physically disconnect a USB device from the modem router, safely remove it to avoid data damage:
Go to Advanced > USB Sharing > USB Storage Device and click .
2. Access Your USB Disk
By default, all the network clients can access all folders on your USB disk. Refer to
the following table for access instructions. You can also customize your sharing
content and set a sharing account by referring to Customize Your Settings.
Windows
Computer
¾Method 1:
Go to Computer > Network, then click the Network Server Name
(model number by default) in the Computer section.
Note:
Operations in different systems are similar. Here we take Windows 7 as an example.
26
Chapter 6 USB Settings
Windows
Computer
¾Method 2:
Open a web browser (or go to Computer) and type the server
address \\CR1900 or ftp://CR1900 in the address bar, then press
Enter.
Mac
1 ) Select Go > Connect to Server
2 ) Type the server address smb://CR1900
3 ) Click Connect
4 ) When prompted, select the Guest radio box. (If you have set up
a username and a password to deny anonymous access to the
USB disks, you should select the Registered User radio box. To
learn how to set up an account for the access, refer to To Set up
Authentication for Data Security.)
Tablet Use a third-party app for network files management.
Tips:
You can also access your USB disk by using your Network/Media Server Name as the server address.
Refer to To Customize the Address of the USB Disk to learn more.
27
Chapter 6 USB Settings
6. 1. 2. Customize Your Settings
¾To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to
only share specific folders, follow the steps below:
1. Visit http://tplinkmodem.net, then log in with the password you set for the router.
2. Select Advanced > USB Sharing > Sharing Access. Focus on the Folder Sharing
section. Click the button to disable Share All, then click Add to add a new sharing
folder.
3. Select the Volume Name and Folder Path, then enter a Folder Name as you like.
4. Decide the way you share the folder:
Enable Authentication: Tick to enable authentication for this folder sharing, and
you will be required to use a username and password to access the USB disk.
Refer to To Set up Authentication for Data Security to learn more.
Enable Write Access: If you tick this checkbox, network clients can modify this
folder.
Enable Media Sharing: Tick to enable media sharing for this folder, and you can
view photos, play music and watch movies stored on the USB disk directly from
DLNA-supported devices. Click Media Sharing to learn more.
5. Click Save.
28
Chapter 6 USB Settings
Tips:
The modem router can share eight volumes at most. You can click on the USB Storage Device page to
detach the corresponding volume you do not need to share.
¾To Set up Authentication for Data Security
If you enable Authentication, network clients will be required to enter the username and
password you set when accessing the USB disk.
1. Visit http://tplinkmodem.net, then log in with the password you set for the router.
2. Select Advanced > USB Settings > Sharing Access.
3. Specify an account and click Save.
Note:
For Windows users, do not set the sharing username the same as the Windows username. Otherwise,
Windows credential mechanism may cause the following problems:
If the sharing password is also the same as the Windows password, authentication will not work
since the Windows will automatically use its account information for USB access.
If the sharing password is different from the Windows password, the Windows will be unable to
remember your credentials and you will always be required to enter the sharing password for USB
access.
4. Enable Authentication to apply the account you just set.
If you leave Share All enabled, click the button to enable Authentication for all
folders.
29
Chapter 6 USB Settings
If Shae All is disabled, enable Authentication for specific folders.
Note:
Due to Windows credential mechanism, you might be unable to access the USB disk after changing
Authentication settings. Please log out from the Windows and try to access again. Or you can change the
address of the USB disk by referring to To Customize the Address of the USB Disk.
¾To Customize the Address of the USB Disk
You can customize the server name and use the name to access your USB disk.
1. Visit http://tplinkmodem.net, then log in with the password you set for the router.
2. Select Advanced > USB Settings > Sharing Access.
3. In the Sharing Settings section, make sure Network Neighborhood is ticked, and
enter a Network/Media Server Name as you like, such as Myshare, then click Save.
30
Chapter 6 USB Settings
4. Now you can access the USB disk by visiting \\Myshare (for Windows) or smb://
Myshare (for Mac).
6. 2. Remote Access via FTP Server
You can access your USB disk outside the local area network.
For example:
Share photos and other large files with your friends without logging in to (and paying
for) a photo-sharing site or email system.
Get a safe backup for the materials for a presentation.
Remove the files on your camera’s memory card from time to time during the journey.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature
because private addresses are not routed on the internet.
6. 2. 1. Access the USB Disk
1. Connect Your USB Disk
Insert your USB storage device into the modem router’s USB port directly or using
a USB cable. Wait several seconds until the USB LED becomes solid on.
Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the modem router.
If the USB storage device requires using bundled external power, make sure the external power has
been connected.
If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
Before you physically disconnect a USB device from the modem router, safely remove it to avoid
data damage: Select Advanced > USB Sharing > USB Storage Device and click .
31
Chapter 6 USB Settings
2. Enable Authentication for Data Security
It is strongly recommended that you set and apply a sharing account for data
security.
1 ) Visit http://tplinkmodem.net, then log in with the password you set for the router.
2 ) Select Advanced > USB Sharing > Sharing Access.
3 ) Specify an account and click Save.
Note:
For Windows users, do not set the sharing username the same as the Windows username.
Otherwise, Windows credential mechanism may cause the following problems:
If the sharing password is also the same as the Windows password, authentication will not work since
Windows will automatically use its account information for USB access.
If the sharing password is different from the Windows password, the Windows will be unable to remember
your credentials and you will always be required to enter the sharing password for USB access.
4 ) Enable Authentication to apply the sharing account.
If you leave Share All enabled, click the button to enable Authentication for all
folders.
If Share All is disabled, enable Authentication for specific folders.
32
Chapter 6 USB Settings
Note:
Due to Windows credential mechanism, you might be unable to access the USB disk after changing
Authentication settings. Please log out from the Windows and try to access again.
3. Enable the FTP (via Internet)
Select the check box to enable FTP(via Internet), then click Save.
4. Access Your USB Disk via Internet
Now different clients with internet connection can access the USB disk:
33
Chapter 6 USB Settings
Computer
1 ) Open a web browser (or go to Computer, only for Windows
users).
2 ) Type the server address in the address bar:
Type in ftp://<WAN IP address of the modem router>:<port
number> (such as ftp://59.40.2.243:21). If you have specified
the domain name of the modem router, you can also type
in ftp://<domain name>:<port number> (such as ftp://
MyDomainName:21)
The Address Bar of the Windows Explorer (Windows 7)
3 ) Press Enter on the keyboard.
4 ) Access with the username and password you set in Step 2
Enable Authentication for Data Security.
Tips:
You can also access the USB disk via a third-party app for network files
management, which can resume broken file transfers.
Tablet Use a third-party app for network files management.
Tips:
Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you modem
router.
6. 2. 2. Customize Your Settings
¾To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to
only share specific folders, follow the steps below:
1. Visit http://tplinkmodem.net, then log in with the password you set for the router.
2. Select Basic > USB Sharing > Sharing Access. Focus on the section of Folder
Sharing. Click the button to disable Share All, then click Add to add a new sharing
folder.
34
Chapter 6 USB Settings
3. Select the Volume Name and Folder Path, then specify the Folder Name as you like.
4. Tick Enable Authentication.
5. If you allow network clients to modify this folder, tick Enable Write Access.
6. Click Save.
Tips:
The modem router can share eight volumes at most. You can click on the USB Storage Device page to
detach the corresponding volume you do not need to share.
6. 3. Media Sharing
The feature of Media Sharing allows you to view photos, play music and watch movies
stored on the USB disk directly from DLNA-supported devices, such as your computer,
tablet and PS2/3/4.
35
Chapter 6 USB Settings
6. 3. 1. Access the USB Disk
1. Connect Your USB Disk
Insert your USB storage device into the modem router’s USB port directly or using
a USB cable. Wait several seconds until the USB LED becomes solid on.
Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the modem router.
If the USB storage device requires using bundled external power, make sure the external power has
been connected.
If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
Before you physically disconnect a USB device from the modem router, safely remove it to avoid
data damage: Go to Advanced > USB Sharing > USB Storagre Device and click .
2. Access the Media Files on Your USB Disk
Now the DLNA-supported devices (such as your computer and tablet) connected
to the modem router can detect and play the media files on the USB disks.
Windows
Computer
Go to Computer > Network, then click the Media Server Name (model
number by default) in the Media Devices section.
Note:
Here we take Windows 7 as an example.
Tablet Use a third-party DLNA-supported player.
36
Chapter 6 USB Settings
6. 3. 2. Customize Your Settings
¾To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to
only share specific folders, follow the steps below:
1. Visit http://tplinkmodem.net, then log in with the password you set for the router.
2. Select Advanced > USB Sharing > Sharing Access.
3. Focus on the section of Folder Sharing. Click the button to disable Share All, then
click Add to add a new sharing folder.
4. Select the Volume and Folder Path, then enter a Share Name as you like.
5. Tick Enable Media Sharing and click Save.
Tips:
The modem router can share eight volumes at most. You can click on the page to detach the
corresponding volume you do not need to share.
37
Chapter 6 USB Settings
¾To Specify the Media Server
You can also modify the media server name or disable the feature of Media Sharing as
needed.
1. Visit http://tplinkmodem.net, then log in with the username (admin) and password
(admin or the one customized by you).
2. Select Advanced > USB Settings > Folder Sharing.
3. Enter a Network/Media Server Name as you like, such as Myshare. You can deselect
the checkbox of Media Server to disable the media server feature.
4. Click Save.
6. 4. Printer Sharing
The feature of Printer Sharing helps you share a printer with different computers
connected to the modem router.
Note:
Printers unlisted on this page may be incompatible with the modem router:
http://www.tp-link.com/common/compatible/print-server/.
1. Install the Driver of the Printer
Make sure you have installed the driver of the printer on each computer that needs
printer service.
If you do not have the driver, contact the printer manufacturer.
2. Connect the Printer
Cable a printer to the USB port with the USB cable. Wait several seconds until the
USB LED becomes solid on.
3. Install the TP-Link USB Printer Controller Utility
TP-Link USB Printer Controller Utility helps you access the shared printer. Download
and Install the utility on each computer that needs printer service.
1 ) Visit http://www.tp-link.com/app/usb/.
2 ) Click PC Utility (for Windows users) or Mac Utility to download the installation
file and uncompress it.
38
Chapter 6 USB Settings
3 ) Open the uncompressed folder, then click TP-Link USB Printer Controller Setup
(for Windows users) or TP-Link UDS Printer Controller Installer (for Mac users)
to install the utility.
4. Access the Printer
You should set the shared printer as Auto-Connect Printer on every computer that
needs printer service.
1 ) Double-click the icon on your desktop to launch the USB Printer Controller.
2 ) Highlight the printer you share.
Windows
Mac
3 ) Click the Auto-Connect for printing tab to pull down a list, then select Set Auto-
Connect Printer.
39
Chapter 6 USB Settings
Windows
Mac
4 ) Select the printer you share, then click Apply.
Windows
40
Chapter 6 USB Settings
Mac
5 ) You will see the printer marked as Auto-Connect Printer. Now you can print with
this printer.
Windows
Mac
Tips:
The Print Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers).
To scan with TP-Link USB Printer Controller, right-click the printer and select Network Scanner. Then,
a scanning window will pop up. Finish the scanning process by following the on-screen instructions.
Chapter 7
Parental Controls
This function allows you to block inappropriate, explicit and malicious websites, and
control access to specified websites at specified time.
42
Chapter 7 Parental Controls
Control what types of websites my children or other home
network users can visit and even the time of day they are allowed
to access the internet.
For example, I want to allow my children’s devices (e.g. a computer
or a tablet) to access only www.tp-link.com and wikipedia.org
from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other
time.
1. Visit http://tplinkmodem.net, and log in with the password
you set for the router.
2. Go to Basic or Advanced > Parental Controls and enable
Parental Controls.
3. Click Add.
I want to:
How can I
do that?
43
Chapter 7 Parental Controls
4. Click Scan, and select the device to be controlled. Or, enter
the Device Name and MAC Address manually.
5. Click the icon to set the Effective Time. Select the
appropriate cell(s) and click Save.
6. Enter a Description for the entry.
7. Select the checkbox to enable this entry and click Save.
8. Select the Restriction Policy.
1 ) When Blacklist is selected, the controlled devices cannot
access any websites containing the specified keywords
during the Effective Time period.
2 ) When Whitelist is selected, the controlled devices can
only access websites containing the specified keywords
during the Effective Time period.
9. Click Add a New Keyword. You can add up to 200 keywords
for both Blacklist and Whitelist. Below are some sample
entries to allow access.
44
Chapter 7 Parental Controls
1 ) Enter a web address (e.g. www.tp-link.com) or a web
address keyword (e.g. wikipedia) to only allow or block
access to the websites containing that keyword.
2 ) If you wish to block all internet browsing access, do not
add any keyword to the Whitelist.
10. Enter the keywords or websites you want to add and click
Save.
Now you can control your children’s internet access according
to your needs.
Done!
Chapter 8
Guest Network
This function allows you to provide Wi-Fi access for guests without disclosing your
main network. When you have guests in your house, apartment, or workplace, you can
create a guest network for them. In addition, you can assign network authorities for
guests to ensure network security and privacy.
Create a Network for Guests
Customize Guest Network Options
46
Chapter 8 Guest Network
8. 1. Create a Network for Guests
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > 2.4GHz Wireless or 5GHz Wireless > Guest Network. Locate the
Wireless section.
3. Create a 2.4GHz or 5GHz guest network according to your needs.
1 ) Select Enable Guest Network.
2 ) Set an easy-to-identify SSID. Don‘t select Hide SSID unless you want your
guests and other people to manually input this SSID for Wi-Fi access.
3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption
values, and set an easy-to-remember password.
4. Click Save. Now your guests can access your guest network using the SSID and
password you set!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.
8. 2. Customize Guest Network Options
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > 2.4GHz Wireless or 5GHz Wireless > Guest Network. Locate the
Guest Authorities section.
3. Assign network authorities according to your needs.
Allow Guests to Access Each Other
47
Chapter 8 Guest Network
Select this checkbox to allow the clients in your guest network to access each
other.
Allow Guests to Access My Local Network
Select this checkbox to allow the clients in your guest network to access your local
network, not just internet access.
4. Click Save in the Wireless section. Now users in your guest network can enjoy only
the network authorities you assigned!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section.
Chapter 9
NAT Forwarding
Modem router’s NAT (Network Address Translation) feature makes the devices in the
LAN use the same public IP address to communicate in the internet, which protects the
local network by hiding IP addresses of the devices. However, it also brings about the
problem that external host cannot initiatively communicate with the specified device in
the local network.
With forwarding feature the modem router can penetrate the isolation of NAT and
allows the external hosts in the internet to initiatively communicate with the devices in
the local network, thus to realize some special functions.
TP-Link modem router includes three forwarding rules. If two or more rules are set, the
priority of implementation from high to low is Virtual Servers, Port Triggering and DMZ.
This chapter contains the following sections:
Share Local Resources over the Internet by Virtual Servers
Open Ports Dynamically by Port Triggering
Free Applications from Port Restriction by DMZ
Translate Address and Port by ALG
49
Chapter 9 NAT Forwarding
9. 1. Share Local Resources over the Internet by
Virtual Servers
When you build up a server in the local network and want to share it over the internet,
Virtual Servers can realize the service and provide it for the internet users. At the same
time Virtual Servers can keep the local network safe as other services are still invisible
from the internet.
Virtual Servers can be used for setting up public services in your local network, such as
HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
Share my personal website I’ve built in local network with my
friends through the internet.
For example, the personal website has been built in my home PC
(192.168.1.100). I hope that my friends can visit my website. The
PC is connected to the modem router with the WAN IP address
218.18.232.154.
Modem Router
WAN: 218.18.232.154
LAN
Home
Personal Website
1. Assign a static IP address to your PC, for example
192.168.1.100.
2. Visit http://tplinkmodem.net, and log in with the password
you set for the router.
3. Go to Advanced > NAT Forwarding > Virtual Servers, click
Add.
I want to:
How can I
do that?
50
Chapter 9 NAT Forwarding
4. Click Scan to select a service from the list to automatically
populate the appropriate port number in the External Port
and Internal Port fields. If the service is not listed, enter the
service manually, and enter the External Port number (e.g.
21) or a range of ports (e.g. 21-25). Leave the Internal Port
blank if it is the same as the External Port; or enter a specific
port number (e.g. 21) if the External Port is a single port. Here
we take HTTP as an example.
5. Enter the IP address of the PC running the service application
in the Internal IP field. Here is 192.168.1.100.
6. Select the corresponding protocol for the service application:
TCP, UDP, or All from the Protocol drop-down list.
7. Select Enable This Entry.
8. Click Save.
Tips:
1. You should verify the port number that the service needs.
2. You can add multiple port forwarding rules if you want to provide several
services in a modem router. Please note that the External Port cannot be
overlapped.
Users in the internet can enter http:// WAN IP: External Port (in
this example: http://218.18.232.154:80) to visit your personal
website.
Tips:
WAN IP should be a public IP address. For the WAN IP is assigned dynamically
by ISP, it is recommended to apply and register a domain name for the WAN
by DDNS, go to Set Up a Dynamic DNS Service Account for more information.
Then you can use http:// Domain Name: External Port to visit the website.
Done!
51
Chapter 9 NAT Forwarding
9. 2. Open Ports Dynamically by Port Triggering
Port Triggering can specify a trigger port and its corresponding external ports. When
a host in the local network initiates a connection to the trigger port, all the external
ports will be opened for subsequent connections. The modem router can record the IP
address of the host. When the data from the internet return to the external ports, the
modem router can forward them to the corresponding host. Port Triggering is mainly
applied to online games, VoIPs and video players. Common applications include MSN
Gaming Zone, Dialpad and Quick Time 4 players, etc.
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > NAT Forwarding > Port Triggering and click Add.
3. Click Scan to select an application from the list to automatically populate the
default values into the appropriate fields. If you want to add an unlisted application,
manually enter the Application, Triggering Port, Triggering Protocol, External Port
and select the External Protocol.
4. Select Enable This Entry.
5. Click Save.
Note:
1. When the triggering connection is released, the corresponding opened ports will be closed.
2. Each rule can only be used by one host on the LAN at a time. The triggering connection of other hosts on the LAN
will be refused.
3. External Port ranges of different entries cannot overlap each other.
52
Chapter 9 NAT Forwarding
9. 3. Free Applications from Port Restriction by DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally
exposed to the internet. This can realize the unlimited bidirectional communication
between internal hosts and external hosts. The DMZ host becomes a virtual server with
all ports opened. When you are not clear about which ports to open in some special
applications, like IP camera and database software, you can set the PC to be a DMZ
host.
Note:
DMZ is more applicable in the situation that users are not clear about which ports to open. When it is
enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazard. If
DMZ is not in use, please disable it in time.
Allow the home PC to join the internet online game without port
restriction.
For example, due to some port restriction, when playing the
online games, you can log in normally but cannot join a team
with other players. To solve this problem, set your PC as a DMZ
with all ports opened.
1. Assign a static IP address to your PC, for example
192.168.1.100.
2. Visit http://tplinkmodem.net, and log in with the password
you set for the router.
3. Go to Advanced > NAT Forwarding > DMZ.
4. Enable DMZ.
5. Enter the IP address 192.168.1.100 in the DMZ Host IP
Address field.
6. Click Save.
The configuration is completed. You’ve set your PC to a DMZ
host and now you can make a team to game with other players.
I want to:
How can I
do that?
Done!
53
Chapter 9 NAT Forwarding
9. 4. Translate Address and Port by ALG
ALG (Application Layer Gateway) allows customized NAT (Network Address Translation)
traversal filters to be plugged into the gateway to support address and port translation
for certain application layer “control/data” protocols: FTP, TFTP, H225 etc. Enabling ALG
is recommended.
Visit http://tplinkmodem.net, and log in with the password you set for the router. Go to
Advanced > NAT Forwarding > ALG.
IPSec Passthrough: If enabled, it allows IPSec (Internet Protocol Security) to
be tunneled through an IP network and passed through the router. IPSec uses
cryptographic security services to ensure private and secure communications over
IP networks.
PPTP Passthrough: If enabled, it allows Point-to-Point sessions to be tunneled through
an IP network and passed through the router.
Multicast ALG: If enabled, it allows Multicast clients and servers to transfer data via
NAT.
UPnP ALG: If enabled, it allows UPnP (Universal Plug and Play) clients and servers to
transfer data via NAT.
FTP ALG: If enabled, it allows FTP (File Transfer Protocol) clients and servers to transfer
data via NAT.
TFTP ALG: If enabled, it allows TFTP (Trivial File Transfer Protocol) clients and servers
to transfer data via NAT.
H225 ALG: If enabled, it allows H225 messages to be transferred via NAT.
54
Chapter 9 NAT Forwarding
PPTP ALG: If enabled, it allows Point-to-Point sessions to be tunneled via NAT.
SIP ALG: If enabled, it allows clients communicate with SIP (Session Initiation Protocol)
servers via NAT.
Chapter 10
Specify Your Network
Settings
This chapter introduces how to change the default settings or adjust the basic
configuration of the modem router using the web management page.
This chapter contains the following sections:
Internet Settings
LAN Settings
Wireless Settings
Set Up a Dynamic DNS Service Account
56
Chapter 10 Specify Your Network Settings
10. 1. Internet Settings
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Basic > Internet page. Select the Internet Connection Type and enter the
information provided by your ISP.
Note: Do not change the settings unless necessary.
3. Click Save to make the settings effective, and you can refer to Test Internet
Connectivity to test the internet connection.
10. 2. LAN Settings
10. 2. 1. Change the LAN IP Address
The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log
in to its web management page. The LAN IP address together with the Subnet Mask
(255.255.255.0) defines the subnet that the connected devices are on. If the IP address
conflicts with another device in your local network, you can change it.
Follow the steps below to change your IP address.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Network > LAN Settings page and locate the LAN section.
57
Chapter 10 Specify Your Network Settings
3. Type in a new IP Address appropriate to your needs.
4. Click Save in the DHCP Server section to make the settings effective.
10. 2. 2. Use the Modem Router as a DHCP Server
You can configure the modem router to act as a DHCP server to assign IP addresses to
its clients. To use the DHCP server function of the modem router, you must configure all
computers on the LAN to obtain an IP address automatically.
Follow the steps below to configure DHCP server.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Network > LAN Settings page and locate the DHCP Server
section.
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TP-LINK CR1900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TP-LINK CR1900 in de taal/talen: Engels als bijlage per email.

De handleiding is 5.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info