Radio controlled alarm clock with thermometer
Radio controlled alarm clock with thermometer
2322
6.5 Alarm setting
• Select your desired alarm by “MODE” button:
1. Alarm 1: ALM 1
2. Alarm 2: ALM 2
• Set the alarm time in the desired alarm mode. Hold “MODE” button
for 3 seconds. The hour digits are flashing. Press “▼“ or “▲“ but-
ton to adjust the time. Confirm with “MODE” button. Set minutes in
the same way. Confirm with “MODE” button and the alarm is activat-
ed.
• To activate or deactivate the alarm function press “ALARM” button.
, , + or no alarm symbol is shown on the LCD.
• Once the alarm starts to ring, you can stop the alarm by pressing
“ALARM” button.
• You can activate the snooze function by pressing the “LIGHT/
SNOOZE” button on the top. Zz appears and the alarm will be inter-
rupted for 4 minutes.
6.6 Dual time setting
• Select dual time by “MODE” button.
• Hold “MODE” button for 3 seconds. The hour digits are flashing.
Press “▼“ or “▲“ button to adjust the time. Confirm with “MODE”
button. Set minutes in the same way. Confirm with “MODE” button.
7. Backlight
• Press “LIGHT/SNOOZE” button. The backlight will light for 5 sec.
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the batteries if you do not use the product for a lengthy
period.
• Keep the instrument in a dry place.
8.1 Battery replacement
• Replace the batteries when the display becomes weak.
9. Troubleshooting
Problem Solution
No indication ➜ Ensure batteries polarities are
correct
➜ Change the batteries
No DCF reception ➜ Press WAVE button for 3 seconds
➜ Wait for attempted reception
during the night
