1110
HOLOclock - Radio controlled clock with 3-D effect
╞
Thank you for choosing this instrument from TFA.
Through patented optics, the time, date and temperature will be projected by means of the beam
splitter lens. In this way, the display appears in midair.
Because of the laws of physics, this effect can only be seen from a certain viewing angle.
1. Before you start using it
•
Please make sure to read the instruction manual carefully. This information will help you to
familiarise yourself with your new device, to learn all of its functions and parts, to find out
important details about its first use and how to operate it, and to get advice in the event of
faults.
•
Following and respecting the instructions in your manual will prevent damage to your instru-
ment and loss of your statutory rights arising from defects due to incorrect use.
•
We shall not be liable for any damage occurring as a result of non following of these instruc-
tions.
•
Likewise, we take no responsibility for any incorrect readings and for any consequences which
may result from them.
•
Please take particular note of the safety advice!
•
Please keep this instruction manual for future reference.
2. Scope of delivery
•
Radio-controlled clock
•
Instruction manual
•
Batteries
•
Power adaptor
3. Field of operation and all the benefits of your new instrument at a glance
•
New patented 3-D display
•
Radio-controlled clock with highest precision and manual setting option
•
Indication of the date
•
Indication of the indoor temperature
•
Automatic change of the display is adjustable
4. For your safety
•
This product is exclusively intended for the field of application described above. It should only be
used as described within these instructions.
•
Unauthorized repairs, modifications or changes to the product are prohibited.
•
This product is not be used for public information, it is only intended for home use.
Caution!
ƽ
Risk of electrocution!
•
Plug the instrument only into a socket installed in regulation manner and with a mains voltage
of 230V!
•
The instrument and the mains adapter must not come into contact with water or moisture. Only
suitable for operation in dry interiors.
HOLOclock - Radio controlled clock with 3-D effect
╞
•
Do not use the unit if the housing or the mains adapter are damaged.
•
Keep the unit out of reach of persons (including children) who cannot fully appreciate the
potential risks of handling electrical equipment.
•
Pull the plug out of the socket immediately if any fault occurs or if the unit is not used for a
longer period of time.
•
Only use the supplied mains adapter.
•
Do not pull the plug out of the socket by its lead.
•
Route the mains lead so that it does not come into contact with sharp-edged or hot objects.
Caution!
ƽ
Risk of injury:
•
Keep this instrument and the batteries out of the reach of children.
•
Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explo-
sion!
•
Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and new batteries together, nor bat-
teries of different types.
•
Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.
ƽ
Important information on product safety!
•
Do not place your product near extreme temperatures, vibrations or shocks.
•
Do not place any objects on the unit.
5. Elements
5.1 Functions
A: 3-D Display
A 1: Time / date / indoor temperature
B: Buttons
B 1: MODE button
B 2: SET button
B 3: WAVE button
B 4: + button
B 5: – button
B 6: LIGHT button
C: Housing
C 1: Battery compartment
C 2: Power socket
C 3: Light sensor
6. Getting started
•
Remove the protective film from the display.
•
Insert the adapter into the jack. Connect the power adapter to a wall socket. The unit is ready
for use.
TFA_No. 60.5009_Anleitung 09.10.2013 14:11 Uhr Seite 6
