Radio-controlled clock with outdoor and indoor temperature
╞
Radio-controlled clock with outdoor and indoor temperature
╞
14 15
8.1.1 Setting of the time zone
•
In the setting mode you can make the time zone correction.
•
The time zone correction is needed for countries where the DCF signal can be received but the time
zone is different from the German time (e.g. +1=one hour later).
•
Press the
+ / 12/24
or
– / °C/°F
button.
•
Confirm the setting with the
MODE
button.
8.1.2 Day-of-the week language
•
In the setting mode you may change the setting of the day-of-the week language: German (GER),
French (FRA), Spanish (ESP), Italian (ITA), Dutch (NET), Danish (DAN), Russian (RU) and English (EN).
8.2 Setting of the alarm
•
Press the
MODE
button in normal mode.
•
AL and 7:00 (default) or the last adjusted alarm time appear on the display.
•
Press and hold the
MODE
button.
•
The hour digits will be flashing.
•
Press the
+ / 12/24
or
– / °C/°F
button to adjust the hours.
•
Confirm the setting with the
MODE
button and set the minutes in the same way.
•
Press the
MODE
button again to return to the current time.
•
To activate the alarm function, press the
ALARM
button.
•
The alarm symbol appears on the display.
•
When the adjusted alarm time is reached, the alarm will ring.
•
The alarm symbol will be flashing .
•
Press any button and the alarm will stop working.
•
If the alarm is not stopped manually, the increasing alarm will automatically turn off after certain
minutes and will be reactivated at the same time.
•
When the alarm rings, press the
SNOOZE
button and the snooze function will be activated.
•
Once the snooze function is activated, Zz will be flashing on the display.
•
The alarm will be interrupted for 5 minutes.
•
The snooze function can be activated up to seven times.
•
To turn off the alarm and snooze function press the
ALARM
button.
•
The alarm symbol and the snooze symbol disappear on the display.
8.3 Setting of the temperature unit
•
Press the
– / °C/°F
button to change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
8.4 Outdoor temperature alarm
•
Press and hold the
ALERT
button for 3 seconds.
•
and 50 °C (default) or the last adjusted upper temperature limit appear on the display.
•
Press the
+ / 12/24
or
– / °C/°F
button to adjust the upper temperature limit.
•
Confirm with the
ALERT
button.
•
and -20°C (default) or the last adjusted lower temperature limit appear on the display.
•
Press the
+ / 12/24
or
– / °C/°F
button to adjust the desired lower temperature limit.
•
Confirm with the
ALERT
button.
•
The alarm is activated. On the display appears .
•
Press the
ALERT
button again to deactivate the alarm function.
•
disappears.
•
In the case of an alarm the corresponding symbol will be flashing and an alarm sound is activated.
•
Press any button and the alarm will stop working.
9. Positioning and fixing of the radio-controlled clock and the outdoor transmitter
•
Choose a shady and dry position for the outdoor transmitter. (Direct sunshine falsifies the measure-
ment and continuous humidity strains the electronic components needlessly).
•
Place the radio-controlled clock in the living room with the table stand (fold our). With the suspen-
sions device you can fix it on a wall. Avoid the vicinity of any interfering field like computer monitors
or TV sets and solid metal objects.
•
Check the transmission of the signal from the outdoor transmitter to the radio-controlled clock (trans-
mission range of up to 100 m free field). Within ferro-concrete rooms (basements, superstructures),
the received signal is naturally weakened.
•
If necessary choose another position for the outdoor transmitter and/or radio-controlled clock.
•
If the transmission is successful, you can mount the outdoor transmitter.
10. Care and maintenance
•
Clean the instruments with a soft damp cloth. Do not use solvents or scouring agents.
•
Remove the batteries if you do not use the outdoor transmitter and the radio-controlled clock for a
long period of time.
•
Keep the instruments in a dry place.
10.1 Battery replacement
•
As soon as the battery symbol appears on the display of the radio-controlled clock beside the outdoor
temperature or in the display of the outdoor transmitter, change the batteries of the outdoor trans-
mitter.
•
Open the battery compartment of the outdoor transmitter by extending the stand and pull the lid
down.
•
Insert two new batteries 1,5 V AAA. Make sure the polarities are correct.
•
Change the batteries when the functions of the radio-controlled clock becomes weak.
•
Open the battery compartment of the radio-controlled clock.
•
Insert four new batteries 1,5 V AA. Make sure the polarities are correct.
•
Please note:
When the batteries are changed, the contact between outdoor transmitter and radio-controlled clock
must be restored – so always insert new batteries into both devices or start a manual transmitter
search.
11. Troubleshooting
Problems Solutions
No indication on the display of ➜ Ensure that the batteries polarity are correct
the radio-controlled clock or ➜ Change the batteries
the outdoor transmitter
No DCF reception ➜ Press and hold – / °C/°F button for three seconds and start the
initialization manually
➜ Wait for attempted reception during the night
➜ Choose another place for your product
➜ Manual setting of the clock
➜ Check if there is any source of interference.
➜ Restart the radio-controlled clock according to the manual
No reception of the ➜ No outdoor transmitter is installed
outdoor transmitter ➜ Check batteries of external transmitter
Display “---” (do not use rechargeable batteries!))
➜ Restart the transmitter and the radio-controlled clock according to
the manual
TFA_No. 60.4510_Anleitung 03.11.2014 11:24 Uhr Seite 8
