2120
CHARGE-IT – Radio-controlled alarm clock with USB charging function
• Open the battery compartment at the back.
• Insert two new batteries AAA 1,5 V into the battery compartment. Make sure the polarity is
correct.
• Close the battery compartment again.
6.3 Backlight
•Attention: Continuous illuminated backlight only works when using the power adapter.
• Press SNOOZE/LIGHT button once to dim the backlight.
• Press SNOOZE/LIGHT button once more to turn off the backlight.
• To temporarily activate the backlight, press any button (in battery operation only or when the
backlight is deactivated).
7. Operation
• The device will automatically quit the setting mode if no button is pressed for a few seconds.
• Press the SNOOZE/LIGHT button in setting mode to return to normal mode.
• Press and hold the +or - button in setting mode for fast mode.
7.1 Manual settings
• Press and hold the SET / RCC button in normal mode for three seconds, to enter the setting mode.
• BEEP appears and ON (default) flashes on the display.
• Press the +or -button to deactivate (OFF) or activate the key tone.
• Press the SET / RCC button again to do the settings in the following sequence: the radio signal
reception (RCC ON - default), time zone (0H - default), the 12 or 24 hours format (24H - default),
the hours, the minutes, the year, the month and the day, the temperature unit (°C - default), the
snooze interval (10 minutes - default) and the day-of-the-week language (GERMAN - default).
Press the +or - button to adjust it.
• Confirm with the SET / RCC button.
• Once the DCF time signal is successfully received and the DCF reception is activated, the manual-
ly set time is overwritten.
7.1.1 DCF reception
• By default, the DCF reception is activated (RCC ON) and after successful reception of the DCF sig-
nal no manual adjustment is necessary.
• Press the +or - button if you want to deactivate the DCF reception (RCC OFF).
CHARGE-IT – Radio-controlled alarm clock with USB charging function
7.1.2 Time zone setting
• In the setting mode, press the +or -button to make the time zone correction (-12/+12).
• The time zone correction is needed for countries where the DCF signal can be received but the time
zone is different from the DCF time (e.g. +1=one hour plus).
7.1.3 24- or 12-hour system setting
• Press the +or - button in setting mode to choose the 12 HR or 24 HR system.
• In 12 HR system AM (before noon) or PM (after noon) appears on the display.
• In 12 HR system the format month / day / year appears on the display.
7.1.4 Snooze function setting
• In the setting mode you can set the snooze interval.
• Press the +or -button to set the desired time duration in steps of 5 minutes (5 to 120 minutes).
7.1.5 Day-of-week language setting
• In the setting mode choose the day-of-the-week language.
• Press +or -button.
• In the display appears: German, English, French, Spanish, Italian and Dutch.
7.2 Alarm time setting
• Press the ALARM button in normal mode.
• ALARM and 6:30 (default) or the last adjusted alarm time appear on the display.
• Press and hold ALARM button for 3 seconds.
• The alarm symbol appears and the hour digit flashes.
• Press the +or -button to adjust the hours.
• Press the ALARM button again and you can adjust the minutes with the +or -button.
• Press the ALARM button again and TYPE appears on the display.
• Press the ALARM button again. SINGLE (default) or the last adjusted alarm mode appears on the
display.
• Confirm the setting with the ALARM button or press the +or - button to adjust the desired alarm
mode (SINGLE, MON-FRI or WEEKEND).
• Press the ALARM button to return to normal mode.
• The corresponding alarm symbol will appear on the display next to the current time display. The
alarm function is activated.
TFA_No. 60.2537_Anleit_08_16 12.09.2016 17:36 Uhr Seite 11
