Radio-controlled clock
Radio-controlled clock
2120
7.3 Setting of alarm clock
•
Press and hold ALARM button.
•
A brief beep tone will sound.
•
flashes on the LCD of the display.
•
The hour digit is flashing. Press UP or DOWN button to adjust the hours.
•
Press ALARM button again and you can adjust the minutes with the UP or DOWN
button.
•
Confirm with ALARM button.
•
The display shows the current time.
•
Press ALARM button again and the alarm function is activated.
•
appears on the display.
•
Once the alarm starts to ring (3 different sounds), you can stop the alarm by
pressing any button.
•
You can activate the snooze function by pressing the SNOOZE/BRIGHTNESS but-
ton on the top.
•
flashes and the alarm will be interrupted for 4 minutes.
•
To turn off the alarm function, press again the ALARM button.
7.4 Backlight
•
To activate the brightness of the backlight (2 levels), press SNOOZE/BRIGHTNESS
button.
8. Care and maintenance
•
Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect
from moisture.
•
Remove the batteries if you do not use the product for a lengthy period.
•
Keep the instrument in a dry place.
7. Operation
•
Important: Buttons will not function while scanning DCF signal.
•
During the operation, all successful settings will be confirmed by a brief beep
tone.
•
The instrument will automatically quit the setting mode if no button is pressed
within 20 seconds.
•
Press and hold UP or DOWN button in the setting mode for fast running.
7.1 Manual setting of clock, time zone and calendar
•
Press and hold SET button in normal mode. A brief beep tone will sound. 00 is
flashing. Press UP or DOWN buttons the time zone (+12/-12).
•
The time zone setting is needed for countries where the DCF signal can be
received but the time zone is different from the German time.
•
Press SET button to make the settings in the following sequence: Hours, minutes,
year, month and day. Press UP or DOWN button to adjust it.
•
Confirm with SET button.
•
The manually set time will be overwritten by the DCF time when the signal is
received successfully
•
Press SET button to change between time and date (DATE appears on the dis-
play).
7.2 12 and 24 hours system indication
•
Press DOWN button in normal mode to choose 12 HR or 24 HR system.
•
A brief beep tone will sound.
•
In 12 HR system AM or PM appears on the display.
TFA_No. 60.2505 Anleitung_01/12 24.01.2012 10:33 Uhr Seite 11
