29
2. Once the MIN or MAX data is displayed, press and hold the SET
key for 3 seconds to reset the respective MIN or MAX record to
current temperature data, and current time, date display.
Note: The MIN or MAX data needs to be reset individually.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT
TRANSMITTERS
When more than 1 transmitter used:
1. To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2. Use OUT/+ key to view the MIN/MAX temperature and humidity data
for the selected transmitter.
3. To reset the minimum and maximum temperature and humidity
data, and the times at which they were recorded, press the SET key
continuously for about 3 seconds. This will reset the MIN/MAX data
recorded to the current time, date, temperature and humidity. The
current time taken is the normal displayed time and does not regard
the time zone set for the unit.
Note: the MIN/MAX data for each transmitter needs to be reset
separately.
TEMPERATURE TRANSMITTER:
The temperature is measured and transmitted to the Weather Station
approximately every 4 seconds.
The range of the Temperature Transmitter may be affected by the
temperature. At cold temperatures the transmitting distance may be
decreased. Please bear this in mind when positioning the transmitter.
LOW BATTERY INDICATOR
Low battery indicator is displayed on the LCD when the batteries require
changing
CHECKING FOR 868MHz RECEPTION
If the outdoor temperature data is not being received within three
minutes after setting up (or outdoor display show “- -. -” in the outdoor
section of the Weather station after failed attempts during normal
operation), please check the following points:
1. The distance of the Weather station or transmitters should be at
least 2 meters away from any interfering sources such as computer
monitors or TV sets.
2. Avoid placing the transmitters onto or in the immediate proximity of
metal window frames.
3. Using other electrical products such as headphones or speakers
operating on the 868MHz-signal frequency may prevent correct
signal transmission or reception. Neighbors using electrical devices
operating on the 868MHz-signal frequency can also cause
interference.
Note:
When the 868MHz signal is received correctly, do not re-open the battery
cover of either the transmitter or Weather station, as the batteries may
spring free from the contacts and force a false reset. Should this happen
accidentally then reset all units (see “Setting up” above) otherwise
transmission problems may occur.
The transmission range is around 100 meters from the Temperature
transmitter to the Weather Station (in open space). However, this depends
on the surrounding environment and interference levels. If no reception is
