2322
KLIMA-MONITOR - Wireless Thermo-Hygrometer
KLIMA-MONITOR - Wireless Thermo-Hygrometer
•
The alarm symbol appears on the display.
•
Confirm the setting with the ALARM / SET button.
7.1.2 Humidity alarm
•
HI AL and 90 % (default IN: 80%) or the last adjusted upper humidity limit
appear on the display (channel 1-3 and internal sensor).
•
Press the CHANNEL / + or MIN/MAX / – button to adjust the desired upper
humidity limit.
•
Press and hold the ALARM / SET SET button after setting the value when
still flashing to activate the alarm function.
•
The alarm symbol appears on the display.
•
Confirm the setting with the ALARM / SET button.
•
LO AL and 30 % (default IN: 40%) or the last adjusted lower humidity limit
appear on the display.
•
Press the CHANNEL / + or MIN/MAX / – button to adjust the desired lower
humidity limit.
•
Press and hold the ALARM / SET bSET button after setting the value when
still flashing to activate the alarm function.
•
The alarm symbol appears on the display.
•
Set the alarm for the additional transmitters and for the internal sensor in
the same way.
•
Repeat the above steps until you have set and activate the desired alarms.
7.2 Display of the adjusted alarm values
•
Press the ALARM / SET button in normal mode to show the adjusted upper
alarm limits (channel 1-3 and internal sensor).
•
Press again the ALARM / SET button in normal mode to show the adjusted
lower alarm limits (channel 1-3 and internal sensor).
•
Press again the ALARM / SET button to return to normal display.
7.3 Case of alarm
•
In the case of an alarm the corresponding symbol will be flashing and an
alarm sound is activated. Stop the alarm tone with any button.
7.3 Delete the alarm
• Press the CHANNEL / + button until the arrow appears on the desired channel.
•
Press and hold ALARM / SET button for 3 seconds.
6.7 Maximum and minimum values
•
Press the MIN/MAX / – button.
•
MAX appears on the display.
•
On the display appear the maximum values since the last reset.
•
Press and hold the MIN/MAX / – button to delete the maximum values of
the currently selected channel.
•
Press the MIN/MAX / – button again.
•
MIN appears on the display.
•
On the display appear the minimum values since the last reset.
•
Press and hold the MIN/MAX / – button to delete the minimum values of the
currently selected channel.
•
Press the MIN/MAX / – button again to go back to the display of the present
values.
7. Settings
•
The device will automatically quit the setting mode if no button is pressed
for a long period of time.
• Press and hold the MIN/MAX / – or the CHANNEL / + button for a fast running.
7.1 Setting of the alarm for the temperature and humidity
7.1.1 Temperature alarm
•
Press the CHANNEL / + button until the arrow appears on the desired chan-
nel (channel 1-3 and internal sensor).
•
Press and hold ALARM / SET button for 3 seconds.
•
HI AL and 60 °C (default IN: 35°C) or the last adjusted upper temperature
limit appears on the display.
•
Press the CHANNEL / + or MIN/MAX / – button to adjust the desired upper
temperature limit.
•
Press and hold the ALARM / SET button after setting the value when still
flashing to activate the alarm function.
•
The alarm symbol appears on the display.
•
Confirm the setting with the ALARM / SET button.
•
LO AL and -20°C (default IN: 10°C) or the last adjusted lower temperature
limit appear on the display.
•
Press the CHANNEL / + or MIN/MAX / – button to adjust the desired lower
temperature limit.
•
Press and hold the ALARM / SET button after setting the value when still
flashing to activate the alarm function.
TFA_No. 30.3054_Anleit_08_16 05.08.2016 09:30 Uhr Seite 12
