658229
1
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
4
+ button
MIN/MAX / RESET
button
SET button
MALIBU
WIRELESS POOL THERMOMETER
Instructions Manual
Cat. No. 30.3053.IT
Thank you for choosing this advice from TFA.
BEFORE YOU USE IT
Please be sure to read the instruction manual carefully.
This information will help you to familiarise yourself with your new
device, learn all of its functions and parts, find out important details
about its first use and how to operate it, and get advice in the event
of faults.
Following the instruction manual for use will prevent damage to the
device and loss of your statutory rights arising from defects due to
incorrect use.
We shall not be liable for any damage occurring as a result of
not following these instructions. Likewise, we take no
responsibility for any incorrect readings and for any
consequences which may result from them.
Please look after this manual for future reference.
Please take particular note of the safety advice!
SCOPE OF SUPPLY:
Temperature station (basic station)
Outdoor transmitter
Pool sensor
Instruction manual
FIELD OF OPERATION AND ALL THE BENEFITS OF
YOUR NEW INSTRUMENT AT A GLANCE:
For pool and pond
Water temperature wireless via pool sensor with 100 mm
measuring depth
Outdoor temperature wireless via outdoor transmitter
Transmission range up to 100 m (free field)
Indication of indoor temperature and humidity
Maximum and minimum values
Dew point
Radio controlled clock
Very simple installation, no cables required
FOR YOUR SAFETY:
The product is exclusively intended for the field of application
described above. The product should only be used as
described within these instructions.
Unauthorised repairs, modifications or changes to the product
are prohibited.
The product is not to be used for medical purpose or for public
information, but is intended solely for home use.
Caution!
Risk of injury:
Keep the instruments and the batteries out of reach of
children.
Batteries must not be thrown into the fire, short-circuited,
taken apart or recharged. Risk of explosion!
Batteries contain harmful acids. Low batteries should be
changed as soon as possible to prevent damage caused by a
leaking battery. Never use a combination of old and new
batteries together or batteries of different types. Wear
chemical-resistant protective gloves and glasses when
handling leaked batteries.
! Important information on product safety!
Do not expose the instrument to extreme temperatures,
vibration or shock.
The outdoor transmitter is protected against splash water, but
is not watertight. Choose a shady and dry position for the
outdoor transmitter.
When water freezes remove the pool sensor.
ELEMENTS
The temperature station
The outdoor transmitter
Remote transmission of outdoor
temperature to temperature station by 868
MHz signal
Wall mounting case
Mounting at a sheltered place. Avoid
direct rain and sunshine
The pool sensor
Remote transmission of water temperature in pool or pond to
temperature station by 868 MHz signal
Waterproof case
HOW TO INSTALL AND REPLACE BATTERIES IN THE
OUTDOOR TRANSMITTER
The outdoor transmitter uses 2 x AAA, IEC LR3,
1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Slide the battery cover downwards and
remove it.
2. Insert the batteries, observing the correct
polarity (see marking).
3. Replace the battery cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
POOL SENSOR
The pool sensor uses 2 x AA, IEC LR6, 1.5V batteries. To install and
replace the batteries, please follow the steps below:
1. Hold the body of the pool sensor and unlock the upper part by
turning it counter clockwise and separate it carefully from the
body.
2. Insert batteries observing the correct polarity (see marking).
3. Screw the two parts together again. Ensure that the cover is
flat and sufficiently tight secured (markings should
correspond). This will prevent water from entering the battery
compartment and subsequently damage the unit.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE STATION
The temperature station uses 2 x
AAA, IEC LR3, 1.5V batteries. To
install and replace the batteries,
please follow the steps below:
1. Open the battery compartment
by pushing the battery cover
upwards with your thumb.
Insert batteries observing the
correct polarity (see marking).
2. Replace compartment cover.
SETTING UP
1. First, insert the batteries in the outdoor transmitter (see “To
install and replace batteries in the temperature
transmitter above).
2. Then, insert the batteries in the pool sensor (see “To install
and replace batteries in the pool sensor above)
3. Within 15 seconds of powering up the outdoor transmitter and
pool sensor, insert the batteries in the temperature station
(see “To install and replace batteries in the temperature
station above). Once the batteries are in place, all segments
of the LCD will light up briefly. Following the indoor
temperature/humidity and the time as 00:00 will be displayed.
If this information is not displayed on the LCD after 60
seconds, remove the batteries and wait for at least 60
seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
4. After the batteries are inserted, the temperature station will
start receiving data signal from the outdoor transmitter and
pool sensor. The outdoor temperature data should then be
displayed on the temperature station. If this does not happen
after 5 minutes, the batteries will need to be removed from all
units and reset from step 1.
5. In order to ensure sufficient 868 MHz transmission however,
the distance between the temperature station and the outdoor
transmitter should not be more than 100 meters and 25
meters to the pool sensor (in water). (see notes on
Positioning and “868 MHz Reception”).
Note:
In the event of changing batteries of the units, ensure the
batteries do not spring free from the contacts. Always wait at
least 1 minute after removing the batteries before reinserting,
otherwise start up and transmission problems may occur.
6. Once the outdoor data reception period is completed, the DCF
tower icon in the clock display will start flashing in the upper
left corner. This indicates that the clock has detected that
there is a radio signal present and is trying to receive it. When
the time code is received, the DCF tower becomes
permanently lit and the time will be displayed.
RADIO-CONTROLLED TIME RECEPTION
The time base for the radio controlled time is a Cesium Atomic Clock
operated by the Physikalisch Technische Bundesanstalt
Braunschweig. It has a time deviation of less than one second in one
million years. The time is coded and transmitted from Mainflingen
near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a
transmitting range of approximately 1,500 km. Your radio-controlled
clock receives this signal and converts it to show the precise time.
‘Changeover from summer time or winter time is automatically.
The quality of the reception depends greatly on the geographic
location. In normal cases, there should be no reception problems
within a 1.500 km radius of Frankfurt.
DCF reception is done twice daily at 02:00 and 03:00 am. If the
reception is not successful at 03:00 am, then the next reception takes
place the next hour and so on until 06:00am, or until the reception is
successful. If the reception is not successful at 06:00 am, then the
next attempt will take place the next day at 02:00 am.
Please take note of the following:
The recommended distance to any interfering sources like
computer monitors or TV sets is a minimum of 1.5 - 2 meters.
Within Ferro-concrete rooms (basements, superstructures),
the received signal is naturally weakened. In extreme cases,
please place the unit close to a window and/ or point its front
or back towards the Frankfurt transmitter.
During nighttime, the atmospheric disturbances are usually
less severe and reception is possible in most cases. A single
daily reception is adequate to keep the accuracy deviation
under 1 second.
FUNCTION BUTTONS:
Temperature station:
The device has 3 easy to use function buttons: 1 button on the front,
and 2 buttons on the back
LCD SCREEN
The LCD screen is split into 4 sections displaying the information for
time, indoor temperature and humidity, outdoor temperature and pool
temperature.
* When the signal is successfully received by the temperature
station, the outdoor reception icon will be switched on. (If not
successful, the icon will not be shown on LCD). The user can then
easily see whether the last reception was successful (icon on) or not
(icon off). On the other hand, the short blinking of the icon shows that
a reception is currently taking place.
MANUAL SETTINGS
Time zone setting
Time reception ON/OFF setting
12/24-hour setting
Manual time setting
°C/°F temperature setting
Factory reset setting (FAC)
Press and hold the SET button for about 3 seconds to enter the
setting mode:
TIME ZONE SETTING
The time zone default is 0h. To set a different time zone:
1. The value of the actual set time zone will be flashing.
Foldable
stand
LCD
display
Function
button
Hanging
hole
Battery
cover
Time
Indoor relative
humidity %
Outdoor reception signal (pool sensor)*
temperature/
dewpoint in
°C or °F
Outdoor
temperature
in °C or °F
DCF
Tower icon
(for time
reception)
Low battery
indicator
(temperature
station)
Low battery
indicator (pool
sensor)
Low battery
indicator
(temperature
transmitter)
Outdoor
reception
signal
(transmitter)*
Pool
temperature
in °C or °F
Function
buttons
Time Zone (flashing)
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TFA 30.3053.IT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TFA 30.3053.IT in de taal/talen: Engels als bijlage per email.

De handleiding is 0,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van TFA 30.3053.IT

TFA 30.3053.IT Gebruiksaanwijzing - Nederlands - 3 pagina's

TFA 30.3053.IT Gebruiksaanwijzing - Deutsch - 3 pagina's

TFA 30.3053.IT Gebruiksaanwijzing - Français - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info