576772
8
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
PURE – Wireless thermo-hygrometer
1514
4.1.4 Alarm clock function
4.1.4.1 Manual setting of alarm clock
Press ALARM button in time mode.
W (Alarm time for Monday until Friday) and OFF or the last adjusted alarm time appear on the
display. You can now adjust the alarm time.
Press and hold ALARM button.
The hour digit is flashing. Press or button to adjust hours.
Press the ALARM button again and set minutes in the same way.
Confirm with ALARM button.
Alarm time and W appears on the display. The alarm is activated.
4.1.4.2 Setting of the special alarm time
Press ALARM button again.
S (alarm time for Saturday, Sunday or special alarm time) and OFF or the last adjusted alarm time
appear on the display. You can adjust the alarm time.
Press and hold ALARM button.
Set the alarm time in the same way.
Confirm with ALARM button.
Alarm time and S appear on the display. The alarm is activated.
4.1.4.3 Setting the alarm for frost alert (outdoor temperature at transmitter 1: =/< 0°C)
Press ALARM button again.
PRE-AL and OFF appear on the display.
Press and hold ALARM button.
Select with or button, if you want to be woken up earlier 15, 30, 45, 60 or 90 minutes by risk
of frost.
Confirm with ALARM button.
4.1.4.4 Activate/turn off the different alarm times
Press MODE button and you will return to normal mode.
The alarm time and the activated alarm symbols (S/W/PRE-AL) appear on the display.
Once the alarm starts to ring, W, S and/or PRE-AL flashes.
Press ALARM button to stop the alarm.
The alarm stays active from Monday until Friday (W).
Please consider that you have to activate the weekend or special alarm time (S) always new.
To turn off the alarm function, press button in the desired alarm mode.
To activate the alarm by risk of frost (PRE-AL) at least one alarm time (S/W) has to be activated.
4.2 Temperature and humidity mode
Press the or button to enter the respective display area. When changing the display area a
short beep will sound.
flashes on the display.
You are now in temperature - humidity mode.
4.2.1 Max/Min function
Press MEM button in temperature - humidity mode and the lowest outdoor (CH 1, 2 or 3) and
indoor temperature and humidity is displayed since the last reset.
MIN appears on the display.
PURE – Wireless thermo-hygrometer
Please take note of the following:
Recommended distance to any interfering sources like computer monitors or TV sets is a minimum
of 1.5 - 2 metres.
Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened.
In extreme cases, please place the unit close to a window and/or point its front or back towards the
Frankfurt transmitter.
During night-time, the atmospheric disturbances are usually less severe and reception is possible in
most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.
4. Operation
Important: Buttons will not function while scanning the outdoor transmitter signal.
The instrument will quit the setting mode, if there is no button used within 2 minutes.
Hold or button in setting mode, you will enter fast mode.
4.1 Time mode
Press the or button to enter the respective display area. When changing the display area a
short beep will sound.
TIME flashes on the display.
You are now in the time mode
4.1.1 Manual setting of clock and calendar
To access the setting mode, press and hold MODE button.
The day-of-week language digit is flashing. Press or button to adjust it. Day-of-week lan-
guage: German (DE), English (En), Swedish (SW), Dutch (Du), Spanish (SP), Italian (IT) and French
(Fr).
Press MODE button and the setting sequence is shown as follows: Year, month, date, month/day
sequence (American version) or day/month (European version), 12 (PM appears on the display after
12 h) and 24 hours system indication, hours and minutes. Press or button to make the desired
settings.
If DCF reception is on, the manually set time will be overwritten by the DCF time when the signal is
received successfully.
4.1.2 Dual time
Press MODE button twice in time mode.
ZONE appears on the display.
Press and hold MODE button.
00:00+ flashes on the display. Press or button to adjust the dual time in 30 min. time zone
steps (+15/-13 hours.).
Press MODE button three times to return to normal mode.
4.1.3 Indication of time
Each press on the MODE button in time mode will change the display between:
Time with seconds
Time with day-of-week
Dual time with day of week
Dual time with seconds
Digital display of date
TFA_No. 30.3043 Anleitung_10_11 11.10.2011 10:37 Uhr Seite 8
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TFA 30.3043 - Pure bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TFA 30.3043 - Pure in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info