766502
47
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
TS9030
RAY·DANZ 3.1 Atmos Sound Bar with
Wireless Subwoofer
User manual
1
Contents
1 Before you begin 3
4
10
2 Welcome 11
What’s in the box
Important safety instructions
Disposal of your old product and battery
11
Overview of the Sound Bar main unit 13
Overview of the wireless subwoofer 15
Remove the Sound Bar back cover 16
Set up your Sound Bar system 16
3 Connect, install and pair 21
Connect to your TV 21
Optional: Connect your Blu-ray player 23
Connect your Sound Bar to power supply 24
Install/replace the remote control batteries 25
Pair your wireless subwoofer to the Sound Bar 26
4 Optional connections 28
Connect with the supplied optical cable 28
Connect with the audio cable 30
Pair the Sound Bar with your Bluetooth device 31
2
5 Use your Sound Bar system 33
Operate your Sound Bar with the top panel 33
Sound Bar LED display
Sound Bar Menu Operation
Set up Wi-Fi connection for music streaming
33
33
34
Listen to music from your Bluetooth device 36
Use the USB device for music playback 37
38
7 Notice 40
Declaration of conformity 40
Disposal of your old product and battery 40
8 Trademarks 42
9 FAQ 44
3
1 Before you begin
Carefully read and observe all safety instructions in the safety
This soundbar is intended for indoor use only. In case it
accidentally gets in contact with small amounts of water,
unplug immediately and use a dry cloth to remove the
water.
Unplug the soundbar if it is not used for long periods of
time or during lightning storms.
Make sure the soundbar is installed on a solid surface
or solidly wall-mounted below your TV for the best
experience.
Only use AAA 1.5V non-rechargeable batteries for the
remote control.
In case any of the cables are visibly damaged or pinched,
unplug the soundbar and replace the cable.
Be careful not to sharply bend the HDMI and optical cable
as they may affect the performance.
Protect your hearing by adjusting to a proper volume.
for your listening comfort.
4
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Make sure you read all the safety information before you
use this product.
TCL Entertainment Solutions Limited bears no responsibility
for accidents or damages caused by unauthorized changes,
modifications or improper use of the product.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
This symbol indicates that this product incorporates
double insulation between hazardous main voltage
and user accessible parts. When servicing, use only
identical replacement parts.
5
Warnings
Safety
To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. This product should not
be exposed to dripping or splashing. No objects filled
with liquids, such as vases, should be placed on or near
the product.
The product is unstable if it is not properly placed or
mounted to the wall. Be sure to follow the wall mounting
instructions provided in the user manual to ensure your
safety.
Do not expose batteries to excessive heat such as
sunshine, fire, and so forth.
Read these instructions - Read all the safety and operat-
ing instructions before operating the product.
Retain these instructions - Retain the safety and operat-
ing instructions for future reference.
Heed all warnings - Adhere to all warnings on the product
and in the operating instructions.
Follow all instructions - Follow all operating and use
instructions.
Do not use this apparatus near water The appliance
should not be used near water or moisture for example,
in a wet basement or near a swimming pool and the like.
Clean only with a dry cloth.
6
Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked
on or pinched particularly at plugs, conve-
nience receptacles, and the point where it
exits from the product.
Use only attachments/accessories specified by the
manufacturer.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/ap-
paratus combination to avoid injury from tip-over.
7
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
This appliance is
not intended for use by young children
or infirm persons without supervision. Young children
should be supervised to ensure that they do not play with
the appliance.
8
Cautions
To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Do not place any sources of danger on the product (for
example: liquid filled objects, lighted candles).
Disconnect the power cord to shut off when find trouble
or not in use. The power cord shall be readily operable.
Use of controls or adjustments or performance of proce-
dures other than those described herein, may result in
hazardous radiation exposure or other unsafe operation.
The power cord/appliance coupler is used as the discon-
nect device, the disconnect device must remain readily
operable.
The rating label is located at the bottom or back of the
product.
9
Battery precautions
For 5G WIFI Device
Do not mix batteries (old and new or carbon and alkaline).
Do not dispose of batteries in fire or water.
Recycle or dispose of batteries as per state and local
guidelines.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
When the remote control is not to be used for a long time
(more than a month), remove the battery from the remote
control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the
battery compartment and replace the batteries with new
ones.
Keep away the batteries from heat or moisture.
Do not carry or store batteries with other metallic objects.
Doing so could cause batteries to short circuit, leak or
explode.
The device for operation in the band 5150–5250 MHz is only
for indoor use to reduce the potential for harmful interference
to co-channel mobile satellite systems.
10
Disposal of your old product and battery
CAUTION:
CAUTION:
Do not incinerate. Batteries may explode if overheated.
For disposal or recycling information, please contact your
local authorities.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and
reused.
This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities.This product contains non-re-
movable batteries:
Risk of explosion if the battery is replaced by an
incorrect type.
replacement of a battery with an incorrect type
that can defeat a safeguard.
CAUTION: disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that
can result in an explosion;
CAUTION: leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas.
CAUTION: a battery subjected to extremely low air pressure
that may result in an explosion or the leakage of
flammable liquid or gas.
11
2 Welcome
Congratulations on the purchase of your new TCL Sound
Bar! After it is set up and connected, you can experience a
your home entertainment system. You are recommended
to read through this user manual which helps you set up,
connect and operate the product easily and properly.
Let’s get started.
What’s in the box
Sound Bar main unit with
wireless subwoofer
Remote control
Wireless subwoofer
HDMI cable
12
Optical cable
AC power cord x 2
AAA battery x 2
Wall mount bracket x 2
Wall screw x 2
Wall anchor x 2
Wall mounting screw x 2
Wall mount template
Quick start guide
User Manual
UM
QSG
13
Overview of the Sound Bar main unit
HELLO
HELLO
1 2 3 54
67
8
910 12 1311
1
Press to turn the Sound Bar main unit on or off.
2
Press to switch the audio source among
AUX/Bluetooth/Optical/HDMI in/HDMI ARC/USB
modes.
3
Press to select the Bluetooth source. Press and hold to
enter pairing mode.
4 -
Press to decrease the volume level.
14
5 +
Press to increase the volume level.
6 LED display
It indicates the Sound Bar status (e.g. volume level,
sound bar status).
7
AC input power connector
8
USB Type A connector (only for music playback)
9
Optical input connector
10
AUX input connector
11
HDMI OUT (ARC) connector
12
13
HDMI IN connector
Green/red LED:
It indicates Wi-Fi connection (e.g. Green: connected.
Red: disconnected).
15
Overview of the wireless subwoofer
LED
1
2
3
1 AC input power connector
2 Amber LED indicator
mode.
remains on solidly when pairing is successful.
3 PAIR
Press to activate pairing with the Sound Bar main unit.
Note
The subwoofer is already paired at the factory. Manual
pairing is needed only in case of troubleshooting.
16
Remove the Sound Bar back cover
Remove the back cover of your Sound Bar before
connecting cables.
Set up your Sound Bar system
Notes
Make sure you read all the safety information before you
mount the Sound Bar main unit on the wall. (see ‘Before
Make sure you use screws provided or specified by the
you begin’ on page 3).
authorized manufacturer.
TCL Corporation bears no responsibility for accidents or
damage caused by improper wall mounting and screws
installation or insufficient wall strength, etc.
Additional tools (not supplied) are required for
installation.
17
Place your Sound Bar and subwoofer
You are recommended to place the Sound Bar main unit on the top
of the table and right below the center of your TV.
The distance
between the subwoofer and the Sound Bar main unit should
be less than 3 meters.
< 3m
TV
Wall mount your Sound Bar main unit
1 Place the supplied wall mount template on the wall.
Make sure the wall mount template is at least 5cm
below the center of the TV.
2 Use a level to make sure the Sound Bar is positioned
accurately.
3 the wall.
4 Mark on the wall using each marking on the template
through the mounting holes.
5 Take away the wall mount template.
6 Drill a screw hole at each marking on the wall.
18
> 5cm
TV
TV
1
3
2
5
6
4
950mm
7 Insert the supplied wall anchors into 2 screw holes on
the wall.
8 Insert the supplied wall bracket screws through the wall
brackets into the wall anchors.
9 Fix and tighten the screws on the wall.
7 8 9
10
1050 mm / 41.3"
19
10
Insert the supplied wall mounting screws into the screw
holes in the back of the Sound Bar main unit.
10
1050 mm
11
Hang the Sound Bar main unit on the wall mount
brackets.
11
20
Notes
Check the installation location before you mount the
Sound Bar on the wall.
mounting the Sound Bar on the wall.
21
3 Connect, install and
pair
you can start connecting it to your TV, installing the remote
control and pair it with the Sound Bar main unit.
Connect to your TV
Note
Make sure your TV or device supports the HDMI ARC
feature. For information, check the user manual of your
TV or device.
Please consult your TV's User Manual on how to
verify if HDMI-CEC (also commercially known
asT-Link,Anynet+, SimpLink, BRAVIA Link, EasyLink
or VIERA Link) is enabled.
All technology names mentioned are the trademarks or registered trademarks
of their respective companies.
22
Connect one end of the supplied HDMI cable to the HDMI
input connector on your Sound Bar main unit and another
end to the HDMI ARC output connector of your TV or
device.
23
Optional: Connect your Blu-ray player
For ease of use, you are advised to connect a Blu-ray player
to the TV and enjoy the Sound Bar through HDMI-ARC.
However, in order to enjoy Dolby TrueHD based Atmos
content that not all TVs may support through HDMI-ARC,
you can optionally connect your Blu-ray player directly to
the Sound Bar using the HDMI-in port.
Note
The Sound Bar willl pass on the video signal to the TV. If it
is not successful, turn on the Sound Bar and try again.
The HDMI input supports UHD (4K) and that it can also be
used for game console to enjoy Dolby Atmos audio.
24
Connect your Sound Bar to power
supply
1 Make sure that you have completed all other
connections before connecting the Sound Bar to power
supply.
2 Make sure the power supply voltage complies with your
30).
3 Connect one end of a supplied AC power cord to the
AC input connector on your Sound Bar main unit and
another end to the power socket on the wall.
25
Install/replace the remote control
batteries
Warnings
Replace only with same or equivalent types of batteries.
Performance may be affected when using NiMH
rechargable batteries.
1 Open the battery compartment, remove the old batteries
if necessary.
2 Place two new AAA batteries into the battery
compartment with the correct polarity (+/-).
3 Close the battery compartment.
1 2 3 4
Setup is complete. Your Sound Bar is ready to use. For
more information about how to access different connection
options on your Sound Bar, see the following chapter.
26
Pair your wireless subwoofer to the
Sound Bar
When the wireless subwoofer is connected, you can enjoy
powerful deep bass sounds and a truly immersive audio
experience.
Auto pairing
Make sure both the Sound Bar and wireless subwoofer are
connected to the power supply and are turned on.
«The Sound Bar will pair with the subwoofer
automatically.
«
«The amber LED will remain on solidly when pairing is
successful.
Note
Do not press PAIR at the back of the wireless
subwoofer during auto pairing.
If auto pairing is not successful, you can pair the
subwoofer with the Sound Bar manually.
27
Manual pairing
1 Make sure the Sound Bar and wireless subwoofer are
properly connected to the power supply.
2 Press PAIR at the back of the wireless subwoofer until
«The wireless subwoofer is ready to pair.
3 Press on the top panel of your Sound Bar main unit or
remote control to power on your Sound Bar main unit.
«The Sound Bar and wireless subwoofer will pair
automatically.
«Pairing is successful. The amber LED remains on
solidly.
Note
If the amber LED at the back of the subwoofer still
Disconnect the AC power cord from the wireless
subwoofer and then connect again after 3 minutes.
Then repeat steps 1 to 3.
28
4 Optional connections
You can also connect the Sound Bar with your TV or other
audio devices through the optical or audio cable.
Note
The best way to connect your TCL Sound Bar to your
TV is (in order of preference): 1) HDMI-ARC; 2) Digital
optical (SPDIF); 3) AUX (audio cable); 4) Bluetooth.
Connect with the supplied optical
cable
1 Make sure you have muted the audio of your TV. For
information, check the user manual of your TV.
2 Make sure Sound Bar back cover is removed.
3 Remove the protective caps from the optical cable.
4 Connect one end of the optical cable to the optical input
connector on your Sound Bar main unit and another end
to the optical output connector of your TV or device.
29
Note
If there is no sound output from the Sound Bar main
signal output on your TV. PCM is the most common
digital audio format used and ensures compatibility.
Direction for setting up your Sound Bar using an
optical cable
Do not bend or kink the optical cable (SPDIF) as it
is fragile and can easily get damaged and broken.
30
To get the best possible audio experience using the optical
cable:
1 Press the settings button on your TCL TV remote.
2 Navigate to Audio options.
3 Set TV speakers to off.
Connect with the audio cable
1 Make sure Sound Bar back cover is removed.
2 Connect one end of the audio cable (not supplied) to
the AUX input connector on your Sound Bar main unit
and another end to the headphone or audio output
connector on your TV or device. This will disable the
sound of your TV built-in speakers.
31
Pair the Sound Bar with your Bluetooth
device
You can stream music from your mobile device through
Bluetooth connection.
Notes
Make sure your wireless device supports the Bluetooth
function.
The operational range between the Sound Bar main unit
and your Bluetooth device is approximately 10 meters
(without any obstacle between the Bluetooth device and
Sound Bar main unit).
1 Press on the top panel of your Sound Bar main unit or
remote control.
2 Press on the top panel of your Sound Bar or BT on
the remote control to enter the Bluetooth mode.
3 There are two ways to do the pairing:
Press and hold on the top panel of your Sound
Bar main unit; or
Press and hold /OK on the remote control.
«
ready to pair.
4 Power on your Bluetooth device and activate its
Bluetooth function.
32
5 Select TCL RAY-DANZ on the pairing list of your
Bluetooth device.
«You hear a sound signal.
«Pairing is successful.
Tip
When you turn on the Sound Bar next time, it will be
reconnected to the last connected Bluetooth device.
automatically.
6 To disconnect the Bluetooth function, you can:
press on the Sound Bar main unit to switch to
another source; or
disable the Bluetooth function on your device; or
press and hold /OK on the remote control for
3 TCL
RAY-DANZ on your Bluetooth device, press and
hold /OK on the remote control. You will see
main unit is entering the pairing mode.
33
5
Use your Sound Bar
system
Operate your Sound Bar with the top
panel
1 Make sure the Sound Bar is properly connected to
power supply and sources.
2 Press on the top panel of your Sound Bar main unit or
remote control to power on the Sound Bar.
3 Press on the Sound Bar or the source buttons on the
remote control to switch to the correct source.
Sound Bar LED display
The LED display on the front of the Sound Bar gives you
information about different Sound Bar status.
Sound Bar Menu Operation
In Standby mode, holding the "Play-Pause/OK" key for 5
seconds will bring you to the system settings menu. You
can navigate with VOL +/- and select options with
"Play-Pause/OK". This menu allows you to reset the system
to factory settings and may offer additional settings.
34
Set up Wi-Fi connection for music
streaming
1. Power on the sound bar.
2. On an Android phone, open the Google Home app and
continue with step 3a, on an iOS device, go to Settings -
Wi-Fi and continue with step 3b.
3a. In the Google Home app, make sure you are signed in
and follow the on-screen instructions to complete the
setup process.
3b. In Settings - WiFi, look for "TCL RAY-DANZ" under
"SETUP AS NEW AIRPLAY SPEAKER" and complete the
setup process.
4. Once setup is complete via either 3a or 3b, you can now
enjoy both Chromecast built-in and AirPlay from any
device on the same network.
5. After this setup you may see an message on the sound
6.
bar display that there is new software available (NEW SW
OK/NOT"). Please press “Play-Pause/OK” button on your
remote control to download software and upgrade your
sound bar or any other key to skip for now.
Sound bar is an individual multi-channel audio system,
Pair two speakers for stereo sound is not supported for
current devices.
Speaker Pair: pair two speakers to create a wilder sound
stage for your music, to start, place both speakers in the
same room.
35
Sound Bar status LED display
Power Power on
Power off
Standby
HELLO
STANDBY
Source Bluetooth
Optical
HDMI IN
HDMI ARC
USB
BT
OPT
HDMI1 IN
HDMI2 ARC
USB
Bluetooth Searching mode
Pairing mode
BT flashing
PAIR
Volume control Volume level
Minimum volume reached
Maximum volume reached
Mute
VOL08
V MIN
V MAX
MUTE
Bass/Treble BASS +/-
TREBLE +/-
BAS+3
TRE-3
Vertical
surround mode
SURROUND ON
SURROUND OFF
SUR ON
SUR OFF
Sound modes Movie, Music, TV, BOOST MOVIE MUSIC TV
BOOST
Others Unsupported format
USB unavailable
Audio format detected
NOT SUPPORT FORMAT
NO USB
PCM AUDIO / DOLBY
AUDIO /
DOLBY ATMOS
36
Listen to music from your Bluetooth
device
1 Make sure that your device supports A2DP and/or
device.
2 Pair your Bluetooth device with the Sound Bar main unit
(see ‘Pair the Sound Bar with your Bluetooth device’ on
page 24).
3 Start listening to music stored in your Bluetooth device
through the Sound Bar.
If your Bluetooth device supports A2DP, you can
listen to music, but you cannot control the playback.
If your Bluetooth device supports AVRCP, you can
listen to music and control music playback with the
remote control. Press /OK on the remote control
to pause or resume music playback. Press /
to skip to the previous/next track.
Note
The operational range between the Sound Bar main unit
and your Bluetooth device is approximately 10 meters
(without any obstacle between the Bluetooth device and
Sound Bar main unit).
37
Use the USB device for music
playback
Press /OK on the remote control to listen
to/pause/resume the music.
Press or on the remote control to skip to the
previous or next track.
Press + or - to increase or decrease the volume level.
Tip
This Sound Bar can support USB devices of up to 32GB
FLAC.
38
6 Specifications
Sound Bar main unit
Power supply: AC~100-240V, 50/60Hz
Power consumption: 30 W
Power consumption at standby mode: < 2W
Impedance: 6 Ω
Frequency response: 150 Hz~ 20 kHz
Dimensions (W x D x H): 1050 x 110 x 55 mm
Weight: 2.6 kg
Operating temperature: 0°C - 45°C
Wireless subwoofer
Power adapter: AC~100-240V, 50/60Hz
Power consumption: 30 W
Power consumption at standby mode: ≤ 2W
Frequency response: 40 Hz- 150 Hz
Frequency range: 2404.5 Mhz – 2479.5 Mhz
Max transmitting power: -3.11 dBm
Dimensions (W x D x H): 240 x 240 x 420 mm
Weight: 5.5 kg
Bluetooth
Frequency range: 2402 Mhz – 2480 Mhz
Max transmitting power: 9.7 dBm
Wi-Fi
2.4G Wi-Fi Maximum E.I.R.P: 17.0dBm
2.4G Wi-Fi Frequency bands: 2412 MHz ~ 2462 MHz
39
Remote control
Distance/Angle: 6m/30°
Battery type: 1.5V AAA battery x 2, user replaceable.
5G Wi-Fi (Band 1, Band 2, Band 3) Maximum E.I.R.P:
17.99dBm
5G Wi-Fi (Band 4) Maximum E.I.R.P: 10.0dBm
5G Wi-Fi Frequency bands: 5150 MHz ~ 5350 MHz,
40
7 Notice
Declaration of conformity
Hereby, TCL Corporation declares that this product is
in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU.
Disposal of your old product and
battery
Your product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol on a product means that the product is covered
by European Directive 2012/19/EU.
41
This symbol means that the product contains a battery
covered by European Directive 2013/56/EU which cannot be
disposed of with normal household waste. Inform yourself
about the local separate collection system for electrical
and electronic products and batteries. Follow local rules
and never dispose of the product and batteries with normal
household waste. Correct disposal of old products and
batteries helps prevent negative consequences for the
environment and human health.
Remove the disposable battery
To remove the disposable batteries, see the section
‘Install/replace the remote control batteries’.
Environmental protection and sustainability
We have omitted all unnecessary packaging and make sure
it is eco-friendly and sustainable.
42
8 Trademarks
Bluetooth
Dolby Atmos
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by TCL Corporation under license. Other trademarks
and trade names are those of their respective owners.
HDMI,and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
licensing LLC.
HDMI
Dolby, Dolby Atmos, and the double-D symbol are regis-
tered trademarks of Dolby Laboratories Licensing Corpora-
tion. Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 2012-2020
Dolby Laboratories. All rights reserved.
Apple Airplay
ChromeCast Build-in
Works with Google assistant
To control this AirPlay 2–enabled speaker, iOS 11.4 or later is
required.
Apple, AirPlay, Apple TV, Apple Watch, iPad, iPad Air, iPad
Pro, iPhone, and Lightning are trademarks of Apple Inc.,
registered in the U.S. and other countries..
built-in are trademark of Google LLC.
43
Google, works with Google Assistant and Chromecast
built-in are trademark of Google LLC.
44
9 FAQ
No power
Make sure the AC power cord and AC input connector
are connected properly.
Make sure there is power supply.
Make sure the Sound Bar has turned on.
No sound
Make sure the audio cable is connected to the Sound
Bar and your device.
Make sure you have selected the correct source.
Press + to increase the volume level.
Make sure the Sound Bar is not muted.
The remote control does not work.
Make sure the distance of the remote control and the
Sound Bar main unit is within operational range.
Make sure the batteries are correctly inserted.
I hear distorted sound.
Make sure the cables are properly connected.
Make sure you have selected the correct source.
Make sure the TV is muted if you play audio from the
TV.
45
Bluetooth device.
Make sure the Bluetooth function is activated on your
Bluetooth device.
Make sure the Sound Bar has paired with your
Bluetooth device.
Make sure the Sound Bar has unpaired with another
device.
Does this Sound Bar work with any TV?
The Sound Bar is compatible with any TV that has one
of the these ports: 1. HDMI supporting ARC (preferred);
2. Optical audio output (TOSLink); 3. Headphone output.
When the Sound Bar and TV are both on, there’s an echo
effect.
Simply mute the TV speaker to have the Sound Bar as
the singular source of sound.
How many sound modes are available?
Four sound modes – Movies, Music, TV and Boost.
What are the subwoofer LED indicator status during pairing?
Paired: on solidly.
46
For further support, visit
www.tcl.com/au
How do I get the best Wi-Fi connection?
If you see a lock icon, your Wi-Fi network requires a
password, so make sure you have it available.
Ensure your Internet is working properly. Restarting your
router and modem will solve most Wi-Fi network issues.
This soundbar supports both 2.4GHz and 5GHz Wi-Fi
frequencies. It’s generally best to use the same network
name (SSID) on your router so the product will select the
best network automatically. In case you have different
network names for the two different frequencies, try out
which one provides the best performance for you. Keep in
mind that 2.4GHz has better range which in most cases is
more important than the higher speed 5GHz offers
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TCL TS9030 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TCL TS9030 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van TCL TS9030

TCL TS9030 Gebruiksaanwijzing - Nederlands - 41 pagina's

TCL TS9030 Gebruiksaanwijzing - Nederlands - 313 pagina's

TCL TS9030 Gebruiksaanwijzing - Deutsch - 44 pagina's

TCL TS9030 Gebruiksaanwijzing - English - 313 pagina's

TCL TS9030 Snelstart handleiding - Alle talen - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info