766504
38
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
2.1 Dolby Atmos Sound Bar
with Built-in Subwoofers
8111 Series
User Manual
1
1 Before you begin ���������������������������������������������������� 3
2 Welcome ����������������������������������������������������������������� 4
What’s in the box ............................................................... 4
Overview of the Sound Bar ................................................ 6
Set up your Sound Bar system .......................................... 8
Position Your Sound Bar ................................................... 8
Mount your Sound Bar on the wall .................................... 9
Install/replace the remote control batteries ..................... 13
Overview of the Remote Control ..................................... 14
3 Connect your Sound Bar system ������������������������ 16
Connect with the HDMI cable .......................................... 16
Optional: Connect your Blu-ray player ............................ 18
Connect with an optical cable ........................................ 20
Direction for setting up your Sound Bar using an optical
cable ................................................................................ 21
Connect with a 3.5mm-to-3.5mm audio cable ................ 22
Connect your Sound Bar to power supply ...................... 23
Connect the Sound Bar with your Bluetooth device ....... 24
4 Use your Sound Bar system �������������������������������� 26
Use your Sound Bar with the top panel or remote control ..
26
Listen to music from your Bluetooth device .................... 29
Use the USB device for music playback ......................... 30
Contents
2
5 Specifications ������������������������������������������������������� 31
6 Notice �������������������������������������������������������������������� 32
Declaration of conformity................................................. 32
Disposal of your old product and battery ........................ 32
Trademarks ...................................................................... 34
7 FAQ ������������������������������������������������������������������������ 35
3
1 Before you begin
• Carefully read and observe all safety instructions in the
safety leaflet.
• This soundbar is intended for indoor use only. In case it
accidentally gets in contact with small amounts of water,
unplug immediately and use a dry cloth to remove the
water.
• Unplug the soundbar if it is not used for long periods of
time or during lightning storms.
• Make sure the soundbar is installed on a solid surface
or solidly wall-mounted below your TV for the best
experience.
• Only use AAA 1.5V non-rechargeable batteries for the
remote control.
• In case any of the cables are visibly damaged or pinched,
unplug the soundbar and replace the cable.
• Be careful not to sharply bend the HDMI and optical cable
as this may affect the performance.
• Protect your hearing by adjusting to a proper volume.
Predefined and customizable sound settings are available
for your listening comfort.
4
2 Welcome
Congratulations on the purchase of your new TCL Sound
Bar! After it is set up and connected, you can experience a
superb sound quality and state-of-the-art design to best fit
your home entertainment system. You are recommended
to read through this user manual which helps you set up,
connect and operate the product easily and properly.
Let’s get started.
What’s in the box
Sound Bar
Remote control AAA battery x 2 AC power cord
5
Wall mount bracket x 2 HDMI cable
Wall mounting screw x 2 Wall anchor x 2
QSG
Quick Start Guide
Sleeve x 2
Wall mount template
Safety
instructions
Safety leaflet
6
Overview of the Sound Bar
1
Short press to enter Sleep or Standby mode.
Long press to enter Standby mode.
2
Press to switch the audio source among HDMI ARC/
HDMI IN/OPT/BT/AUX/USB modes.
3
Press to select the Bluetooth function. Press and hold to
enter the pairing mode.
7
4
Press to increase or decrease the volume level.
5 LED indicator
It indicates the Sound Bar status (e.g. volume level, sound
bar status).
6 White LED:
It indicates standby/sleep (solid/blinking) mode.
7 AC input power connector
8 HDMI IN connector
9 HDMI OUT (ARC) connector
10 Optical input connector
11 AUX input connector
12 USB Type A connector
8
Set up your Sound Bar system
Notes
• Make sure you read all the safety information before you
mount the Sound Bar main unit on the wall.
• Make sure you use screws provided or specified by the
authorized manufacturer.
• TCL Overseas Marketing Limited bears no responsibility
for accidents or damage caused by improper wall
mounting and screws installation or insufficient wall
strength, etc.
• Additional tools (not supplied) are required for installation.
• You can choose to place your Sound Bar on a cabinet
under your TV or mount it on the wall.
Position Your Sound Bar
You are recommended to place the Sound Bar on the top of
the cabinet and right below the center of your TV.
9
Mount your Sound Bar on the wall
1 Place the supplied wall mount template on the wall.
Make sure the wall mount template is at least 5cm below
the center of the TV.
2 Use a level to make sure the wall mount template is
positioned accurately.
3 Use the tape to stick the wall mount template firmly on
the wall.
4 Mark on the wall using each marking on the template
through the mounting holes.
5 Take away the wall mount template.
6 Drill a screw hole at each marking on the wall.
TV
10
TV
TV
3
2
5
6
4
1
> 5cm
780mm
7 Screw off the rubber feet from the soundbar and keep
them for future use if the soundbar is placed on a solid
surface.
8 Screw on the wall mount brackets to the soundbar.
9 Insert the supplied screws with the sleeves into the hole
of the wall anchors.
11
7
7
8
8
12
10 Fix and tighten the wall bracket screws on the wall.
11 Hang the Sound Bar on the screws.
99
10
10
11
Notes
• Check the installation location before you mount the
Sound Bar on the wall.
• You may consider to connect the cables first before
mounting the Sound Bar on the wall.
13
Install/replace the remote control
batteries
Warnings
• Dangerofexplosionifbatteryisincorrectlyreplaced.
Replaceonlywiththesameorequivalenttype.
1 Open the battery compartment, remove the old batteries
if necessary.
2 Place two new AAA batteries into the battery
compartment with the correct polarity (+/-).
3 Close the battery compartment.
123
14
Overview of the Remote Control
2
1
4
5
7
12
15
11
6
10
9
3
13
14
8
1
Short press to enter Sleep or Standby mode.
Long press to enter Standby mode.
2
Press to adjust the brightness of the display.
Press and hold for 3 seconds to enable or disable the
Night Mode sound setting.
3
Press to turn on/off Dolby vertical surround.
4
Press to switch the audio source to Optical mode.
5
Press to switch the audio source to HDMI IN source.
15
6
Press to switch the audio source to HDMI (ARC) source.
7
Press to switch the audio source to USB source.
8
Press to switch the audio source to Bluetooth mode.
Press and hold to enter pairing mode.
9
Press to switch the audio source to AUX mode.
10
Press to select the sound mode - modes are available for
watching TV, movie or listening to music.
11
Increase or decrease the treble sound effect.
12
Increase or decrease treble.
Skip to previous or next song. (only for Bluetooth or USB
input sources)
Decrease or increase the volume level.
13
Press to play/pause the music. (Under Bluetooth or
USB mode) In Standby or Sleep mode, press and hold
for 5 seconds to enter SYSTEM MENU. You can use
to view options and OK to confirm.
14
Press to mute or unmute the sound.
15
Increase or decrease the bass sound effect.
16
3 Connect your Sound
Bar system
After you have fixed the position of the Sound Bar, you can
start connecting it to your TV or other devices and listen
to the audio through your Sound Bar. Make sure you have
muted the audio of your TV or device (for AUX or OPT
source). For information, check the user manual of your TV or
device.
Connect with the HDMI cable
Note
• Make sure your TV or device supports the HDMI ARC
feature. For information, check the user manual of your
TV or device.
Connect one end of the HDMI cable to the HDMI ARC input
connector on your Sound Bar and another end to the HDMI
ARC output connector of your TV or device.
To get the best possible audio experience using the HDMI
cable, follow below given steps:
17
1 Connect your Sound Bar to HDMI input marked (ARC)
on your TCL TV.
2 Press the Settings button on your TCL TV remote.
3 Navigate to System options.
4 Set T-Link to On. (This feature may be called, Anynet+,
SimpLink, BRAVIA Link, EasyLink or VIERA Link*.)
AC IN
* All technology names mentioned are the trademarks or registered trademarks
of their respective companies.
18
Optional: Connect your Blu-ray
player
For ease of use, you are advised to connect a Blu-ray player
to the TV and enjoy the Sound Bar through HDMI-ARC.
However, in order to enjoy Dolby TrueHD based Atmos
content that not all TVs may support through HDMI-ARC,
you can optionally connect your Blu-ray player directly to the
Sound Bar using the HDMI-in port.
Notes
• This product features an energy saving low-power
standby mode which consumes <0.5W. This is enabled
by default. In STANDBY mode, the HDMI loop-through
function including AirPlay and Chromecast are disabled.
If desired, a SLEEP mode can be enabled that activates
HDMI loop-through when the sound bar is not in use.
Power consumption in SLEEP mode is <4W and can vary
based on actual use of the HDMI loop-through feature. It
also allows for a faster startup of the sound bar.
It can be enabled as follows:
-Ensure the product is in STANDBY mode
-Hold the “ ” button on the remote control for
5seconds until the display shows .
-After a short while, SLEEP MODE is shown. Now select
with “ ” button to turn it on. You will be asked to
confirm.
-Now exit the settings menu by using VOL+/VOL- key
to select EXIT and leave the menu.
19
• The HDMI input supports UHD (4K) and that it can also
be used for game console to enjoy Dolby Atmos audio.
AC IN
20
Connect with an optical cable
1 Remove the protective caps from an optical cable when
necessary.
2 Connect one end of an optical cable to the optical input
connector on your Sound Bar and another end to the
optical output connector of your TV or device.
AC IN
Note
• In case you are not hearing any sound when using HDMI
or optical, please go into your TV settings menu and
switch audio output to PCM.
21
Direction for setting up your Sound
Bar using an optical cable
Do not bend or kink the optical cable (SPDIF) as it
is fragile and can easily get damaged and broken.
To get the best possible audio experience using the optical
cable:
1 Press the Home button on your TCL TV Remote.
2 Navigate to Audio option under Settings.
3 Uncheck the “TV speaker enabled” option.
4 Under S/PDIF and ARC, select PCM-Stereo.
Notes
• Differentdevicesmayhavedifferentmenuoptions.
• DevicessuchasBlu-rayplayers,set-topboxes,etc.are
alsoapplicable.
22
Connect with a 3�5mm-to-3�5mm
audio cable
You can either:
• connect one end of a 3.5mm-to-3.5mm audio cable to
the AUX input connector on your Sound Bar and another
end to the headphone or audio output connector on your
TV or device. This will disable the sound of your TV built-
in speakers; or
• connect one end of an RCA-to-3.5mm audio cable to the
AUX input connector on your Sound Bar and other ends
to the TV’s audio output connectors.
AC IN
23
Connect your Sound Bar to power
supply
1 Make sure that you have connected the Sound Bar to the
TV before connecting the Sound Bar to power supply.
2 Make sure the power supply voltage complies with your
country’s safety standards (see 'Specifications' on page
31)
3 Connect one end of a supplied AC power cord to the AC
input connector on your Sound Bar and another end to
the power socket on the wall.
AC IN
~AC IN
24
Connect the Sound Bar with your
Bluetooth device
Notes
• Make sure your wireless device supports the Bluetooth
function.
• The operational range between the Sound Bar and your
Bluetooth device is approximately 10m (without any
obstacle between the Bluetooth device and the Sound
Bar).
1 Press on the top panel of your Sound Bar or remote
control to power on the Sound Bar.
2 Press and hold on the top panel of your Sound Bar or
remote control.
is flashes on the LED display. The Sound Bar is
ready to pair.
3 Power on your Bluetooth device and activate its
Bluetooth function.
4 Select TCL 8111 on the pairing list of your Bluetooth
device.
You hear distinct double beep sound.
25
Tip
• If you cannot find the model name TCL 8111 on your
Bluetooth device, press and hold on the remote
control. You will see . Now the Sound Bar is entering
the pairing mode.
3
4
TCL 8111 2
1
Your Sound Bar system is now set up and ready to be used.
5 To disconnect the Bluetooth function, you can:
• press on the Sound Bar or remote control to switch
to another source; or
• disable the Bluetooth function on your device; or
• press and hold on the remote control for 3 seconds.
26
4 Use your Sound Bar
system
Use your Sound Bar with the top
panel or remote control
1 Make sure the Sound Bar is properly connected to the
power supply and sources.
2 Press at the top panel of your Sound Bar or remote
control to switch to the correct source.
LED behaviors under different source modes
Sound Bar status LED display
Power
Power on HELLO
Standby STDBY
Sleep SlEEP
Sleep mode • White LED flashes slowly
Standby mode • White LED
HDMI IN HDMI1 IN
HDMI ARC HDMI2 ARC
USB USB
BLUETOOTH BT
AUX AUX
OPTICAL OPT
27
Bluetooth Normal BT flashing
Pairing mode PAIR
Normal USB
Plug off a USB disk NOUSB
Play Show playing time
Pause PAUSE
Normal OPT
Audio format PCM AUDIO/DOLBY AUDIO
Normal HDMI2 ARC
Audio format PCM AUDIO/DOLBY AUDIO/
DOLBY ATMOS
Normal ARC
Audio format PCM AUDIO/DOLBY AUDIO/
DOLBY ATMOS
Volume up to Maximum V MAX
Volume down to Minimum V MIN
Mute MUTE
Unmute Show the current volume
Treble - Treble + TRE-3 ~ TRE+3
Bass - Bass + BAS-3 ~ BAS+3
Vertical Surround SURR ON/SURR OFF
Equalizer MOVIE/MUSIC/TV
Night mode NIGHT
Dimming mode DIM 1(100%)/DIM 2(30%)
Menu Factory Reset factory reset
28
Note
• After powering on your Sound Bar, if there is no operation
performed on either the Sound Bar or remote control
within 10 seconds, all LED indicators on the Sound Bar
will turn off and light up again when the operation is
resumed.
Tip
• You can use more advanced functions on the remote
control (see 'Overview of the Remote Control' on
page 14).
29
Listen to music from your Bluetooth
device
1 Make sure that your device supports Bluetooth Audio.
The Sound Bar can support the following Bluetooth
profiles: A2DP and/or AVRCP. For information, check the
specification of your device.
2 Pair your Bluetooth device with the Sound Bar (see
'Connect the Sound Bar with your Bluetooth device' on
page 24).
3 Start listening to music stored in your Bluetooth device
through the Sound Bar.
• If your Bluetooth device supports A2DP, you can
listen to music, but you cannot control the playback.
• If your Bluetooth device supports AVRCP, you can
listen to music and control music playback with the
remote control. Press to pause or resume music
playback. Press to skip to the previous/next
track.
Note
• The operational range between the Sound Bar and your
Bluetooth device is approximately 10 meters (without any
obstacle between the Bluetooth device and Sound Bar).
30
Use the USB device for music
playback
• Press on the remote control to listen to/pause/
resume the music.
• Press or on the remote control to skip to the previous
or next track.
• Press or to increase or decrease the volume level.
AC IN
USB
Tip
• This Sound Bar can support USB devices of up to 64GB
memory and the supported file format are MP3 and
FLAC.
31
5 Specifications
Sound Bar
• Power supply: AC~100-240V, 50/60Hz
• Power consumption: 40W
• Power consumption at standby mode: ≤ 0.5W
• Impedance: 6 Ω
• Frequency response: 40 Hz-20 kHz
• Dimensions (WxHxD): 1000x65x128mm
• Weight: 2.9 kg
• Operating temperature: 0°C - 45°C
Bluetooth
• Bluetooth version: 4.2, Bluetooth profile - Bluetooth
stereo supported (Advanced Audio Distribution Profile -
A2DP; Audio Video Remote Control Profile - AVRCP)
• Frequency range: 2402 Mhz – 2480 Mhz
• Max transmitting power: 6.5dBm
Remote control
• Distance/Angle: 6m/ 30°
• Battery type: 1.5V AAA battery x 2, user replaceable.
32
6 Notice
Declaration of conformity
Hereby, TCL Overseas Marketing Limited declares that this
product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU. You can
find the Declaration of Conformity on www.tcl.com.
Disposal of your old product and
battery
Your product is designed and manufactured with high quality
materials and components, which can be recycled and
reused.
This symbol on a product means that the product is covered
by European Directive 2012/19/EU.
33
This symbol means that the product contains a battery
covered by European Directive 2013/56/EU which cannot be
disposed of with normal household waste. Inform yourself
about the local separate collection system for electrical
and electronic products and batteries. Follow local rules
and never dispose of the product and batteries with normal
household waste. Correct disposal of old products and
batteries helps prevent negative consequences for the
environment and human health.
Remove the disposable battery
To remove the disposable batteries, see the section ‘Replace
the remote control battery’.
Environmental protection and sustainability
We have omitted all unnecessary packaging and make sure it
is eco-friendly and sustainable.
34
Trademarks
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TTE Corporation is under license. Other
trademarks and trade names are those of their respective
owners.
Dolby, Dolby Atmos, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 2012-2020
Dolby Laboratories. All rights reserved.
The Adopted Trademarks HDMI, HDMI High-Definition
Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
in the United States and other countries.
35
7 FAQ
No power
• Make sure the AC power cord and AC input connector
are connected properly.
• Make sure there is power supply.
• Make sure the Sound Bar has turned on.
• Check the cable between your TV and the Sound Bar
No sound
• Make sure the audio cable is connected to the Sound Bar
and your device.
• Make sure you have selected the correct source.
• Press to increase the volume level.
• Make sure the Sound Bar is not muted.
Low voice
• Use the remote control to adjust the volume.
• The Night Mode may have accidentally been activated.
Please press for 3 seconds to exit.
* Other EQs cannot be selected in Night Mode.
The remote control does not work�
• Make sure you have selected the correct source.
• Make sure the distance of remote control and the Sound
Bar is within operational range.
• Make sure the battery is correctly inserted and is working.
• Make sure the remote control is close to the remote
control sensor of the Sound Bar.
36
I hear distorted sound�
• Make sure all cables are properly connected.
• Make sure you have selected the correct source.
• Make sure the TV is muted if you play audio from the TV.
I cannot find the Bluetooth name of this Sound Bar on my
Bluetooth device�
• Make sure the Bluetooth function is activated on your
Bluetooth device.
• Make sure the Sound Bar has paired with your Bluetooth
device.
Copyright © 2020 TCL. All rights reserved.
TS8111_EU_EN_UM_V0.12
WE ARE
READY TO
HELP
TCL support:
Please visit www.tcl.com
contact us first
with any questions
TAKE CARE WHEN
REMOVING THE SOUND BAR
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TCL TS8111 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TCL TS8111 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van TCL TS8111

TCL TS8111 Gebruiksaanwijzing - Deutsch - 42 pagina's

TCL TS8111 Snelstart handleiding - Alle talen - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info